MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

EthernetGateway: Use internal LEDs feature for blinking

Browse Source 
Signed-off-by: Tomas Hozza <thozza@gmail.com>
This commit is contained in:
Tomas Hozza
2015-05-06 21:45:00 +02:00
parent 0d6da230c5
commit 29b86801fb
2 changed files with 20 additions and 89 deletions
Download Patch File Download Diff File Expand all files Collapse all files
libraries/MySensors/examples/EthernetGateway/EthernetGateway.ino
+7 -5
View File
@@ -46,6 +46,7 @@
* E.g. If you want to use the defualt values in this sketch enter: 192.168.178.66:5003
*
* LED purposes:
* - To use the feature, uncomment WITH_LEDS_BLINKING in MyConfig.h
* - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
* - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
* - ERR (red) - fast blink on error during transmission error or recieve crc error
@@ -68,7 +69,6 @@
#include <MyParserSerial.h>
#include <MySensor.h>
#include <stdarg.h>
#include <MsTimer2.h>
#include <PinChangeInt.h>
#include "GatewayUtil.h"
@@ -104,7 +104,12 @@ MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);
MyHwATMega328 hw;
// Construct MySensors library (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
// To use LEDs blinking, uncomment WITH_LEDS_BLINKING in MyConfig.h
#ifdef WITH_LEDS_BLINKING
MySensor gw(transport, hw /*, signer*/, RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN);
#else
MySensor gw(transport, hw /*, signer*/);
#endif
#define IP_PORT 5003 // The port you want to open
@@ -136,11 +141,8 @@ void output(const char *fmt, ... ) {
void setup()
{
Ethernet.begin(mac, myIp);
setupGateway(RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN, INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);
// Add led timer interrupt
MsTimer2::set(300, ledTimersInterrupt);
MsTimer2::start();
setupGateway(INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);
// Add interrupt for inclusion button to pin
PCintPort::attachInterrupt(pinInclusion, startInclusionInterrupt, RISING);
libraries/MySensors/examples/EthernetGateway/GatewayUtil.h
+13 -84
View File
@@ -7,9 +7,6 @@
#ifdef ARDUINO
uint8_t pinRx = 8; // Rx led pin
uint8_t pinTx = 9; // Tx led pin
uint8_t pinEr = 7; // Err led pin
uint8_t inclusionTime = 1; // Number of minutes inclusion mode is enabled
uint8_t pinInclusion = 3; // Input pin that should trigger inclusion mode
@@ -17,56 +14,28 @@ uint8_t pinInclusion = 3; // Input pin that should trigger inclusion mode
#define MAX_SEND_LENGTH 120 // Max buffersize needed for messages destined for controller
volatile boolean buttonTriggeredInclusion;
volatile uint8_t countRx;
volatile uint8_t countTx;
volatile uint8_t countErr;
boolean inclusionMode; // Keeps track on inclusion mode
void (*serial)(const char *fmt, ... );
MyParserSerial parser;
void setInclusionMode(boolean newMode);
void txBlink(uint8_t cnt);
void rxBlink(uint8_t cnt);
void errBlink(uint8_t cnt);
char convBuf[MAX_PAYLOAD*2+1];
char serialBuffer[MAX_SEND_LENGTH]; // Buffer for building string when sending data to vera
unsigned long inclusionStartTime;
void setupGateway(uint8_t _rx, uint8_t _tx, uint8_t _er, uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
void setupGateway(uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
inclusionMode = 0;
buttonTriggeredInclusion = false;
serial = _serial;
pinRx = _rx;
pinTx = _tx;
pinEr = _er;
pinInclusion = _inc;
inclusionTime = _incTime;
countRx = 0;
countTx = 0;
countErr = 0;
// Setup led pins
pinMode(pinRx, OUTPUT);
pinMode(pinTx, OUTPUT);
pinMode(pinEr, OUTPUT);
digitalWrite(pinRx, LOW);
digitalWrite(pinTx, LOW);
digitalWrite(pinEr, LOW);
// Setup digital in that triggers inclusion mode
pinMode(pinInclusion, INPUT);
digitalWrite(pinInclusion, HIGH);
// Set initial state of leds
digitalWrite(pinRx, HIGH);
digitalWrite(pinTx, HIGH);
digitalWrite(pinEr, HIGH);
}
@@ -76,11 +45,11 @@ void startInclusionInterrupt() {
}
void incomingMessage(const MyMessage &message) {
if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
rxBlink(3);
} else {
rxBlink(1);
}
// if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
// gw.rxBlink(3);
// } else {
// gw.rxBlink(1);
// }
// Pass along the message from sensors to serial line
serial(PSTR("%d;%d;%d;%d;%d;%s\n"),message.sender, message.sensor, mGetCommand(message), mGetAck(message), message.type, message.getString(convBuf));
}
@@ -106,7 +75,7 @@ void checkInclusionFinished() {
}
}
void parseAndSend(MySensor gw, char *commandBuffer) {
void parseAndSend(MySensor &gw, char *commandBuffer) {
boolean ok;
MyMessage &msg = gw.getLastMessage();
@@ -123,10 +92,14 @@ void parseAndSend(MySensor gw, char *commandBuffer) {
setInclusionMode(atoi(msg.data) == 1);
}
} else {
txBlink(1);
#ifdef WITH_LEDS_BLINKING
gw.txBlink(1);
#endif
ok = gw.sendRoute(msg);
if (!ok) {
errBlink(1);
#ifdef WITH_LEDS_BLINKING
gw.errBlink(1);
#endif
}
}
}
@@ -145,50 +118,6 @@ void setInclusionMode(boolean newMode) {
}
void ledTimersInterrupt() {
if(countRx && countRx != 255) {
// switch led on
digitalWrite(pinRx, LOW);
} else if(!countRx) {
// switching off
digitalWrite(pinRx, HIGH);
}
if(countRx != 255) { countRx--; }
if(countTx && countTx != 255) {
// switch led on
digitalWrite(pinTx, LOW);
} else if(!countTx) {
// switching off
digitalWrite(pinTx, HIGH);
}
if(countTx != 255) { countTx--; }
else if(inclusionMode) { countTx = 8; }
if(countErr && countErr != 255) {
// switch led on
digitalWrite(pinEr, LOW);
} else if(!countErr) {
// switching off
digitalWrite(pinEr, HIGH);
}
if(countErr != 255) { countErr--; }
}
void rxBlink(uint8_t cnt) {
if(countRx == 255) { countRx = cnt; }
}
void txBlink(uint8_t cnt) {
if(countTx == 255 && !inclusionMode) { countTx = cnt; }
}
void errBlink(uint8_t cnt) {
if(countErr == 255) { countErr = cnt; }
}
#else
#error This example is only for use on Arduino.
#endif // ARDUINO