Fixed inclusion mode

libraries/MySensors/examples/Esp8266Gateway/Esp8266Gateway.ino

@@ -57,7 +57,10 @@
  * - Connect GPIO2 via 10K resistor to VCC
  * - Connect GPIO0 via 10K resistor to VCC, and via switch to GND ('bootload switch')
  * 
- * Signing, RF69 radio, inclusion button and a separate SPI flash are not supported yet!
+  * Inclusion mode button:
+ * - Connect GPIO5 via switch to GND ('inclusion switch')
+ * 
+ * * Signing, RF69 radio and a separate SPI flash are not supported yet!
  *
  * Make sure to fill in your ssid and WiFi password below for ssid & pass.
  */
@@ -78,8 +81,8 @@
 const char *ssid =  "MySSID";    // cannot be longer than 32 characters!
 const char *pass =  "MyVerySecretPassword"; //
 
- #define INCLUSION_MODE_TIME 1 // Number of minutes inclusion mode is enabled
-// #define INCLUSION_MODE_PIN  3 // Digital pin used for inclusion mode button
+#define INCLUSION_MODE_TIME 1 // Number of minutes inclusion mode is enabled
+#define INCLUSION_MODE_PIN  5 // Digital pin used for inclusion mode button
 
 #define RADIO_CE_PIN        4   // radio chip enable
 #define RADIO_SPI_SS_PIN    15  // radio SPI serial select
@@ -127,9 +130,9 @@ void output(const char *fmt, ... ) {
 void setup()  
 { 
   // Setup console
-  Serial.begin(115200);
+  hw_init();
 
-  Serial.println();
+  Serial.println(); Serial.println();
   Serial.println("ESP8266 MySensors Gateway");
   Serial.print("Connecting to "); Serial.println(ssid);
 
@@ -142,15 +145,8 @@ void setup()
   Serial.print("IP: "); Serial.println(WiFi.localIP());
   Serial.flush();
   
-#ifndef INCLUSION_MODE_PIN
-  setupGateway(255, INCLUSION_MODE_TIME, output);
-#else
   setupGateway(INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);
 
-  // Add interrupt for inclusion button to pin
-  PCintPort::attachInterrupt(pinInclusion, startInclusionInterrupt, RISING);
-#endif
-
   // Initialize gateway at maximum PA level, channel 70 and callback for write operations 
   gw.begin(incomingMessage, 0, true, 0);
   
@@ -162,10 +158,8 @@ void setup()
 void loop() {
   gw.process();  
   
-#ifdef INCLUSION_MODE_PIN
   checkButtonTriggeredInclusion();
   checkInclusionFinished();
-#endif
   
   //check if there are any new clients
   if (server.hasClient())

libraries/MySensors/examples/Esp8266Gateway/GatewayUtil.h

@@ -1,20 +1,17 @@
 #ifndef __GATEWAYUTIL_H__
 #define __GATEWAYUTIL_H__
 
-#include <MyTransport.h>
-
-
 #ifdef ARDUINO
 
 
-uint8_t inclusionTime = 1; // Number of minutes inclusion mode is enabled
-uint8_t pinInclusion =  3; // Input pin that should trigger inclusion mode
+static uint8_t inclusionTime = 1; // Number of minutes inclusion mode is enabled
+static uint8_t pinInclusion =  3; // Input pin that should trigger inclusion mode
 
 #define MAX_RECEIVE_LENGTH 100 // Max buffersize needed for messages coming from controller
 #define MAX_SEND_LENGTH 120 // Max buffersize needed for messages destined for controller
 
-volatile boolean buttonTriggeredInclusion;
-boolean inclusionMode; // Keeps track on inclusion mode
+static volatile boolean buttonTriggeredInclusion;
+static boolean inclusionMode; // Keeps track on inclusion mode
 bool inclusionButtonSupported = false;
 void (*serial)(const char *fmt, ... );
 
@@ -26,6 +23,11 @@ char convBuf[MAX_PAYLOAD*2+1];
 char serialBuffer[MAX_SEND_LENGTH]; // Buffer for building string when sending data to vera
 unsigned long inclusionStartTime;
 
+
+void startInclusionInterrupt() {
+  buttonTriggeredInclusion = true;
+}
+
 void setupGateway(uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *, ... )) {
   inclusionMode = 0;
   buttonTriggeredInclusion = false;
@@ -36,19 +38,15 @@ void setupGateway(uint8_t _inc, uint8_t _incTime, void (* _serial)(const char *,
   if (inclusionButtonSupported)
   {
     pinInclusion = _inc;
-  
+
     // Setup digital in that triggers inclusion mode
-    pinMode(pinInclusion, INPUT);
-    digitalWrite(pinInclusion, HIGH);
+    pinMode(pinInclusion, INPUT_PULLUP);
+
+    // Add interrupt for inclusion button to pin
+    attachInterrupt(pinInclusion, startInclusionInterrupt, FALLING);
   }
 }
 
-
-
-void startInclusionInterrupt() {
-  buttonTriggeredInclusion = true;
-}
-
 void incomingMessage(const MyMessage &message) {
 //  if (mGetCommand(message) == C_PRESENTATION && inclusionMode) {
 //	gw.rxBlink(3);