Add driver-options to gateways.

libraries/MySensors/MyConfig.h

@@ -18,7 +18,7 @@
 // which requires external flash and the DualOptiBoot bootloader.
 // Note: You can still have OTA FW updates without external flash but it
 // requires the MYSBootloader and disabled MY_OTA_FIRMWARE_FEATURE
-#define MY_OTA_FIRMWARE_FEATURE
+//#define MY_OTA_FIRMWARE_FEATURE
 // Slave select pin for external flash
 #define MY_OTA_FLASH_SS 8
 // Flash jdecid

libraries/MySensors/MySensor.h

@@ -31,10 +31,10 @@
 
 
 // Set the hardware driver to use (initialized by MySensor-class)
-#if defined __AVR_ATmega328P__
+//#if defined __AVR_ATmega328P__
 #include "MyHwATMega328.h"
 typedef MyHwATMega328 MyHwDriver;
-#endif
+//#endif
 
 
 #ifdef DEBUG

libraries/MySensors/examples/EthernetGateway/EthernetGateway.ino

@@ -44,7 +44,12 @@
 #include <SPI.h>  
 
 #include <MySigningNone.h>
+#include <MyTransportRF69.h>
 #include <MyTransportNRF24.h>
+#include <MyHwATMega328.h>
+#include <MySigningAtsha204Soft.h>
+#include <MySigningAtsha204.h>
+
 #include <MyParserSerial.h>  
 #include <MySensor.h>  
 #include <stdarg.h>
@@ -72,11 +77,20 @@
 
 
 // NRFRF24L01 radio driver (set low transmit power by default) 
-MyTransportNRF24 radio(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
-// Message signing driver (none default)
-MySigningNone signer;
-// Construct MySensors library
-MySensor gw(radio, signer);
+MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
+//MyTransportRF69 transport;
+
+// Message signing driver (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+//MySigningNone signer;
+//MySigningAtsha204Soft signer;
+//MySigningAtsha204 signer;
+
+// Hardware profile 
+MyHwATMega328 hw;
+
+// Construct MySensors library (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+MySensor gw(transport, hw /*, signer*/);
+
 
 #define IP_PORT 5003        // The port you want to open 
 IPAddress myIp (192, 168, 178, 66);  // Configure your static ip-address here    COMPILE ERROR HERE? Use Arduino IDE 1.5.7 or later!

libraries/MySensors/examples/MQTTGateway/MQTTGateway.ino

@@ -60,7 +60,12 @@ http://forum.mysensors.org/topic/303/mqtt-broker-gateway
 #include <SPI.h>
 
 #include <MySigningNone.h>
+#include <MyTransportRF69.h>
 #include <MyTransportNRF24.h>
+#include <MyHwATMega328.h>
+#include <MySigningAtsha204Soft.h>
+#include <MySigningAtsha204.h>
+
 #include <MySensor.h>
 #include <MsTimer2.h>
 #include <Ethernet.h>
@@ -94,11 +99,20 @@ uint8_t TCP_MAC[] = { 0x02, 0xDE, 0xAD, 0x00, 0x00, 0x42 };	// Mac-address - You
 //////////////////////////////////////////////////////////////////
 
 // NRFRF24L01 radio driver (set low transmit power by default) 
-MyTransportNRF24 radio(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
-// Message signing driver (none default)
-MySigningNone signer;
-// Construct MySensors library
-MySensor gw(radio, signer);
+MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
+//MyTransportRF69 transport;
+
+// Message signing driver (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+//MySigningNone signer;
+//MySigningAtsha204Soft signer;
+//MySigningAtsha204 signer;
+
+// Hardware profile 
+MyHwATMega328 hw;
+
+// Construct MySensors library (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+MySensor gw(transport, hw /*, signer*/);
+
 
 EthernetServer server = EthernetServer(TCP_PORT);
 MyMessage msg;

libraries/MySensors/examples/SerialGateway/SerialGateway.ino

@@ -23,8 +23,12 @@
 
 #define NO_PORTB_PINCHANGES  
 
+#include <MySigningNone.h>
+#include <MyTransportRF69.h>
 #include <MyTransportNRF24.h>
 #include <MyHwATMega328.h>
+#include <MySigningAtsha204Soft.h>
+#include <MySigningAtsha204.h>
 
 #include <SPI.h>  
 #include <MyParserSerial.h>  
@@ -40,15 +44,20 @@
 #define RADIO_RX_LED_PIN    6  // Receive led pin
 #define RADIO_TX_LED_PIN    5  // the PCB, on board LED
 
-
 // NRFRF24L01 radio driver (set low transmit power by default) 
-MyTransportNRF24 radio(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
-// Message signing driver (none default)
+MyTransportNRF24 transport(RF24_CE_PIN, RF24_CS_PIN, RF24_PA_LEVEL_GW);  
+//MyTransportRF69 transport;
+
+// Message signing driver (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
 //MySigningNone signer;
-// Construct MySensors library
+//MySigningAtsha204Soft signer;
+//MySigningAtsha204 signer;
+
+// Hardware profile 
 MyHwATMega328 hw;
 
-MySensor gw(radio, hw);
+// Construct MySensors library (signer needed if MY_SIGNING_FEATURE is turned on in MyConfig.h)
+MySensor gw(transport, hw /*, signer*/);
 
 char inputString[MAX_RECEIVE_LENGTH] = "";    // A string to hold incoming commands from serial/ethernet interface
 int inputPos = 0;