Five more sensors S_RGB_LIGHT S_RGBW_LIGHT S_COLOR_SENSOR S_HVAC S_MULTIMETER
This commit is contained in:
Barduino
@@ -43,33 +43,43 @@
|
||||
// will make the sketch too large for a pro mini's memory so it's probably best to try
|
||||
// one at a time.
|
||||
|
||||
#define ID_S_ARMED 0 // dummy to controll armed stated for several sensors
|
||||
#define ID_S_DOOR 1
|
||||
//#define ID_S_MOTION 2
|
||||
//#define ID_S_SMOKE 3
|
||||
//#define ID_S_LIGHT 4
|
||||
//#define ID_S_DIMMER 5
|
||||
//#define ID_S_COVER 6
|
||||
//#define ID_S_TEMP 7
|
||||
//#define ID_S_HUM 8
|
||||
//#define ID_S_BARO 9
|
||||
//#define ID_S_WIND 10
|
||||
//#define ID_S_RAIN 11
|
||||
//#define ID_S_UV 12
|
||||
//#define ID_S_WEIGHT 13
|
||||
//#define ID_S_POWER 14
|
||||
//#define ID_S_HEATER 15
|
||||
//#define ID_S_DISTANCE 16
|
||||
//#define ID_S_LIGHT_LEVEL 17
|
||||
//#define ID_S_LOCK 18
|
||||
//#define ID_S_IR 19
|
||||
//#define ID_S_WATER 20
|
||||
//#define ID_S_AIR_QUALITY 21
|
||||
//#define ID_S_DUST 22
|
||||
//#define ID_S_SCENE_CONTROLLER 23
|
||||
//#define ID_S_MOISTURE 24
|
||||
#define ID_S_ARMED 0 // dummy to controll armed stated for several sensors
|
||||
#define ID_S_DOOR 1
|
||||
#define ID_S_MOTION 2
|
||||
#define ID_S_SMOKE 3
|
||||
#define ID_S_LIGHT 4
|
||||
#define ID_S_DIMMER 5
|
||||
#define ID_S_COVER 6
|
||||
#define ID_S_TEMP 7
|
||||
#define ID_S_HUM 8
|
||||
#define ID_S_BARO 9
|
||||
#define ID_S_WIND 10
|
||||
#define ID_S_RAIN 11
|
||||
#define ID_S_UV 12
|
||||
#define ID_S_WEIGHT 13
|
||||
#define ID_S_POWER 14
|
||||
#define ID_S_HEATER 15
|
||||
#define ID_S_DISTANCE 16
|
||||
#define ID_S_LIGHT_LEVEL 17
|
||||
#define ID_S_LOCK 18
|
||||
#define ID_S_IR 19
|
||||
#define ID_S_WATER 20
|
||||
#define ID_S_AIR_QUALITY 21
|
||||
#define ID_S_DUST 22
|
||||
#define ID_S_SCENE_CONTROLLER 23
|
||||
// Lib 1.5 sensors
|
||||
#define ID_S_RGB_LIGHT 24
|
||||
#define ID_S_RGBW_LIGHT 25
|
||||
#define ID_S_COLOR_SENSOR 26
|
||||
#define ID_S_HVAC 27
|
||||
#define ID_S_MULTIMETER 28
|
||||
#define ID_S_SPRINKLER 29
|
||||
#define ID_S_WATER_LEAK 30
|
||||
#define ID_S_SOUND 31
|
||||
#define ID_S_VIBRATION 32
|
||||
#define ID_S_MOISTURE 33
|
||||
|
||||
#define ID_S_CUSTOM 99
|
||||
//#define ID_S_CUSTOM 99
|
||||
|
||||
|
||||
|
||||
@@ -174,13 +184,13 @@ MyHwATMega328 hw;
|
||||
#ifdef ID_S_POWER
|
||||
MyMessage msg_S_POWER_W(ID_S_POWER,V_WATT);
|
||||
MyMessage msg_S_POWER_K(ID_S_POWER,V_KWH);
|
||||
// MyMessage msg_S_POWER_I(ID_S_POWER,V_IMPEDANCE);
|
||||
// MyMessage msg_S_POWER_V(ID_S_POWER,V_VOLTAGE);
|
||||
// MyMessage msg_S_POWER_C(ID_S_POWER,V_CURRENT);
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef ID_S_HEATER //V_HVAC_SETPOINT_HEAT, V_HVAC_FLOW_STATE, V_TEMP, V_STATUS
|
||||
#ifdef ID_S_HEATER
|
||||
|
||||
//////// REVIEW IMPLEMENTATION ////////////
|
||||
|
||||
MyMessage msg_S_HEATER_SET_POINT(ID_S_HEATER,V_HVAC_SETPOINT_HEAT); // HVAC/Heater setpoint (Integer between 0-100). S_HEATER, S_HVAC
|
||||
MyMessage msg_S_HEATER_FLOW_STATE(ID_S_HEATER,V_HVAC_FLOW_STATE); // Mode of header. One of "Off", "HeatOn", "CoolOn", or "AutoChangeOver" // S_HVAC, S_HEATER
|
||||
MyMessage msg_S_HEATER_STATUS(ID_S_HEATER,V_STATUS);
|
||||
@@ -190,7 +200,12 @@ MyHwATMega328 hw;
|
||||
float heater_temp=23.5;
|
||||
bool heater_status=false;
|
||||
String heater_flow_state="Off";
|
||||
const bool dup_v_status=false; // V_STATUS & V_LIGHT are the same, does not compile in case statement of incoming s_heater message
|
||||
|
||||
// V_TEMP // Temperature
|
||||
// V_STATUS // Binary status. 0=off 1=on
|
||||
// V_HVAC_FLOW_STATE // Mode of header. One of "Off", "HeatOn", "CoolOn", or "AutoChangeOver"
|
||||
// V_HVAC_SPEED // HVAC/Heater fan speed ("Min", "Normal", "Max", "Auto")
|
||||
// V_HVAC_SETPOINT_HEAT // HVAC/Heater setpoint
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_DISTANCE
|
||||
@@ -242,6 +257,80 @@ MyHwATMega328 hw;
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGB_LIGHT
|
||||
MyMessage msg_S_RGB_LIGHT_V_RGB(ID_S_RGB_LIGHT,V_RGB);
|
||||
MyMessage msg_S_RGB_LIGHT_V_WATT(ID_S_RGB_LIGHT,V_WATT);
|
||||
String rgbState="000000";
|
||||
//RGB light V_RGB, V_WATT
|
||||
//RGB value transmitted as ASCII hex string (I.e "ff0000" for red)
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGBW_LIGHT
|
||||
MyMessage msg_S_RGBW_LIGHT_V_RGBW(ID_S_RGB_LIGHT,V_RGBW);
|
||||
MyMessage msg_S_RGBW_LIGHT_V_WATT(ID_S_RGB_LIGHT,V_WATT);
|
||||
String rgbwState="00000000";
|
||||
//RGBW light (with separate white component) V_RGBW, V_WATT
|
||||
//RGBW value transmitted as ASCII hex string (I.e "ff0000ff" for red + full white) S_RGBW_LIGHT
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_COLOR_SENSOR
|
||||
MyMessage msg_S_COLOR_SENSOR_V_RGB(ID_S_COLOR_SENSOR,V_RGB);
|
||||
//Color sensor V_RGB
|
||||
//RGB value transmitted as ASCII hex string (I.e "ff0000" for red) S_RGB_LIGHT, S_COLOR_SENSOR
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
MyMessage msg_S_HVAC_V_HVAC_SETPOINT_HEAT(ID_S_HVAC,V_HVAC_SETPOINT_HEAT);
|
||||
MyMessage msg_S_HVAC_V_HVAC_SETPOINT_COOL(ID_S_HVAC,V_HVAC_SETPOINT_COOL);
|
||||
MyMessage msg_S_HVAC_V_HVAC_FLOW_STATET(ID_S_HVAC,V_HVAC_FLOW_STATE);
|
||||
MyMessage msg_S_HVAC_V_HVAC_FLOW_MODE(ID_S_HVAC,V_HVAC_FLOW_MODE);
|
||||
MyMessage msg_S_HVAC_V_HVAC_SPEED(ID_S_HVAC,V_HVAC_SPEED);
|
||||
|
||||
float hvac_SetPointHeat = 16.5;
|
||||
float hvac_SetPointCool = 25.5;
|
||||
String hvac_FlowState = "AutoChangeOver";
|
||||
String hvac_FlowMode = "Auto";
|
||||
String hvac_Speed = "Normal";
|
||||
|
||||
//Thermostat/HVAC device
|
||||
//V_HVAC_SETPOINT_HEAT, // HVAC/Heater setpoint
|
||||
//V_HVAC_SETPOINT_COOL, // HVAC cold setpoint
|
||||
//V_HVAC_FLOW_STATE, // Mode of header. One of "Off", "HeatOn", "CoolOn", or "AutoChangeOver"
|
||||
//V_HVAC_FLOW_MODE, // Flow mode for HVAC ("Auto", "ContinuousOn", "PeriodicOn")
|
||||
//V_HVAC_SPEED // HVAC/Heater fan speed ("Min", "Normal", "Max", "Auto")
|
||||
|
||||
// NOT IMPLEMENTED YET
|
||||
//V_TEMP // Temperature
|
||||
//V_STATUS // Binary status. 0=off 1=on
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MULTIMETER
|
||||
MyMessage msg_S_MULTIMETER_V_IMPEDANCE(ID_S_POWER,V_IMPEDANCE);
|
||||
MyMessage msg_S_MULTIMETER_V_VOLTAGE(ID_S_POWER,V_VOLTAGE);
|
||||
MyMessage msg_S_MULTIMETER_V_CURRENT(ID_S_POWER,V_CURRENT);
|
||||
|
||||
// Multimeter device V_VOLTAGE, V_CURRENT, V_IMPEDANCE
|
||||
// V_IMPEDANCE 14 Impedance value
|
||||
// V_VOLTAGE 38 Voltage level
|
||||
// V_CURRENT 39 Current level
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_SPRINKLER
|
||||
// S_SPRINKLER 31 Sprinkler device V_STATUS (turn on/off), V_TRIPPED (if fire detecting device)
|
||||
// V_STATUS 2 Binary status. 0=off 1=on
|
||||
// V_ARMED 15 Armed status of a security sensor. 1=Armed, 0=Bypassed
|
||||
// V_TRIPPED 16 Tripped status of a security sensor. 1=Tripped, 0=Untripped
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_WATER_LEAK
|
||||
#endif
|
||||
#ifdef ID_S_SOUND
|
||||
#endif
|
||||
#ifdef ID_S_VIBRATION
|
||||
#endif
|
||||
#ifdef ID_S_MOISTURE
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MOISTURE
|
||||
MyMessage msg_S_MOISTURE(ID_S_MOISTURE,V_LEVEL);
|
||||
#endif
|
||||
@@ -426,6 +515,47 @@ void setup()
|
||||
gw.present(ID_S_SCENE_CONTROLLER,S_SCENE_CONTROLLER);
|
||||
gw.wait(SHORT_WAIT);
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGB_LIGHT
|
||||
Serial.println(" RGB_LIGHT");
|
||||
gw.present(ID_S_RGB_LIGHT,S_RGB_LIGHT);
|
||||
gw.wait(SHORT_WAIT);
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGBW_LIGHT
|
||||
Serial.println(" RGBW_LIGHT");
|
||||
gw.present(ID_S_RGBW_LIGHT,S_RGBW_LIGHT);
|
||||
gw.wait(SHORT_WAIT);
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_COLOR_SENSOR
|
||||
Serial.println(" COLOR_SENSOR");
|
||||
gw.present(ID_S_COLOR_SENSOR,S_COLOR_SENSOR);
|
||||
gw.wait(SHORT_WAIT);
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
Serial.println(" HVAC");
|
||||
gw.present(ID_S_HVAC,S_HVAC);
|
||||
gw.wait(SHORT_WAIT);
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MULTIMETER
|
||||
Serial.println(" MULTIMETER");
|
||||
gw.present(ID_S_MULTIMETER,S_MULTIMETER);
|
||||
gw.wait(SHORT_WAIT);
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_SPRINKLER
|
||||
#endif
|
||||
#ifdef ID_S_WATER_LEAK
|
||||
#endif
|
||||
#ifdef ID_S_SOUND
|
||||
#endif
|
||||
#ifdef ID_S_VIBRATION
|
||||
#endif
|
||||
#ifdef ID_S_MOISTURE
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MOISTURE
|
||||
Serial.println(" S_MOISTURE");
|
||||
@@ -558,6 +688,37 @@ void loop()
|
||||
scene();
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGB_LIGHT
|
||||
rgbLight();
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGBW_LIGHT
|
||||
rgbwLight();
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_COLOR_SENSOR
|
||||
color();
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
hvac();
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MULTIMETER
|
||||
multimeter();
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_SPRINKLER
|
||||
#endif
|
||||
#ifdef ID_S_WATER_LEAK
|
||||
#endif
|
||||
#ifdef ID_S_SOUND
|
||||
#endif
|
||||
#ifdef ID_S_VIBRATION
|
||||
#endif
|
||||
#ifdef ID_S_MOISTURE
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MOISTURE
|
||||
moisture();
|
||||
#endif
|
||||
@@ -787,30 +948,13 @@ void weight(){
|
||||
void power(){
|
||||
|
||||
Serial.print("Watt is: " );
|
||||
Serial.println(map(randNumber,1,100,0,150));
|
||||
|
||||
Serial.println(map(randNumber,1,100,0,150));
|
||||
gw.send(msg_S_POWER_W.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
Serial.print("KWH is: " );
|
||||
Serial.println(map(randNumber,1,100,0,150));
|
||||
|
||||
Serial.println(map(randNumber,1,100,0,150));
|
||||
gw.send(msg_S_POWER_K.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
// Serial.print("Impedance is: " );
|
||||
// Serial.println(map(randNumber,1,100,0,150));
|
||||
//
|
||||
// gw.send(msg_S_POWER_I.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
// Serial.print("Voltage is: " );
|
||||
// Serial.println(map(randNumber,1,100,0,150));
|
||||
//
|
||||
// gw.send(msg_S_POWER_V.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
// Serial.print("Current is: " );
|
||||
// Serial.println(map(randNumber,1,100,0,150));
|
||||
//
|
||||
// gw.send(msg_S_POWER_C.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
@@ -936,6 +1080,115 @@ void scene(){
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGB_LIGHT
|
||||
void rgbLight(){
|
||||
|
||||
Serial.print("RGB Light state is: " );
|
||||
Serial.println(rgbState);
|
||||
gw.send(msg_S_RGB_LIGHT_V_RGB.set(rgbState.c_str()));
|
||||
|
||||
Serial.print("RGB Light Watt is: " );
|
||||
Serial.println(map(randNumber,1,100,0,150));
|
||||
gw.send(msg_S_RGB_LIGHT_V_WATT.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGBW_LIGHT
|
||||
void rgbwLight(){
|
||||
|
||||
Serial.print("RGBW Light state is: " );
|
||||
Serial.println(rgbwState);
|
||||
gw.send(msg_S_RGBW_LIGHT_V_RGBW.set(rgbwState.c_str()));
|
||||
|
||||
Serial.print("RGBW Light Watt is: " );
|
||||
Serial.println(map(randNumber,1,100,0,150));
|
||||
gw.send(msg_S_RGBW_LIGHT_V_WATT.set(map(randNumber,1,100,0,150)));
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_COLOR_SENSOR
|
||||
void color(){
|
||||
String colorState;
|
||||
|
||||
String red = String(random(0,256),HEX);
|
||||
String green = String(random(0,256),HEX);
|
||||
String blue = String(random(0,256),HEX);
|
||||
|
||||
colorState=String(red + green + blue);
|
||||
|
||||
Serial.print("Color state is: " );
|
||||
Serial.println(colorState);
|
||||
gw.send(msg_S_COLOR_SENSOR_V_RGB.set(colorState.c_str()));
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
void hvac(){
|
||||
|
||||
// float hvac_SetPointHeat = 16.5;
|
||||
// float hvac_SetPointCool = 25.5;
|
||||
// String hvac_FlowState = "AutoChangeOver";
|
||||
// String hvac_FlowMode = "Auto";
|
||||
// String hvac_Speed = "Normal";
|
||||
|
||||
Serial.print("HVAC Set Point Heat is: " );
|
||||
Serial.println(hvac_SetPointHeat);
|
||||
gw.send(msg_S_HVAC_V_HVAC_SETPOINT_HEAT.set(hvac_SetPointHeat,1));
|
||||
|
||||
Serial.print("HVAC Set Point Cool is: " );
|
||||
Serial.println(hvac_SetPointCool);
|
||||
gw.send(msg_S_HVAC_V_HVAC_SETPOINT_COOL.set(hvac_SetPointCool,1));
|
||||
|
||||
Serial.print("HVAC Flow State is: " );
|
||||
Serial.println(hvac_FlowState);
|
||||
gw.send(msg_S_HVAC_V_HVAC_FLOW_STATET.set(hvac_FlowState.c_str()));
|
||||
|
||||
Serial.print("HVAC Flow Mode is: " );
|
||||
Serial.println(hvac_FlowMode);
|
||||
gw.send(msg_S_HVAC_V_HVAC_FLOW_MODE.set(hvac_FlowMode.c_str()));
|
||||
|
||||
Serial.print("HVAC Speed is: " );
|
||||
Serial.println(hvac_Speed);
|
||||
gw.send(msg_S_HVAC_V_HVAC_SPEED.set(hvac_Speed.c_str()));
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MULTIMETER
|
||||
void multimeter(){
|
||||
int impedance=map(randNumber,1,100,0,15000);
|
||||
int volt=map(randNumber,1,100,0,380);
|
||||
int amps=map(randNumber,1,100,0,16);
|
||||
|
||||
Serial.print("Impedance is: " );
|
||||
Serial.println(impedance);
|
||||
gw.send(msg_S_MULTIMETER_V_IMPEDANCE.set(impedance));
|
||||
|
||||
Serial.print("Voltage is: " );
|
||||
Serial.println(volt);
|
||||
gw.send(msg_S_MULTIMETER_V_VOLTAGE.set(volt));
|
||||
|
||||
Serial.print("Current is: " );
|
||||
Serial.println(amps);
|
||||
gw.send(msg_S_MULTIMETER_V_CURRENT.set(amps));
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_SPRINKLER
|
||||
#endif
|
||||
#ifdef ID_S_WATER_LEAK
|
||||
#endif
|
||||
#ifdef ID_S_SOUND
|
||||
#endif
|
||||
#ifdef ID_S_VIBRATION
|
||||
#endif
|
||||
#ifdef ID_S_MOISTURE
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_MOISTURE
|
||||
void moisture(){
|
||||
|
||||
@@ -983,16 +1236,30 @@ void incomingMessage(const MyMessage &message) {
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
||||
case V_STATUS: // V_LIGHT:
|
||||
#ifdef ID_S_LIGHT
|
||||
case V_LIGHT:
|
||||
if(message.sensor==ID_S_LIGHT){
|
||||
isLightOn = message.getBool();
|
||||
Serial.print("Incoming change for ID_S_LIGHT:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println((isLightOn ? "On":"Off"));
|
||||
light(); // temp ack
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
#ifdef ID_S_HEATER
|
||||
if(message.sensor == ID_S_HEATER){
|
||||
heater_status = message.getBool();
|
||||
Serial.print("Incoming change for ID_S_HEATER:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(heater_status);
|
||||
heater();//temp ack
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
|
||||
|
||||
#ifdef ID_S_DIMMER
|
||||
case V_DIMMER:
|
||||
@@ -1038,8 +1305,11 @@ void incomingMessage(const MyMessage &message) {
|
||||
break;
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HEATER
|
||||
|
||||
case V_HVAC_SETPOINT_HEAT:
|
||||
|
||||
#ifdef ID_S_HEATER
|
||||
if(message.sensor == ID_S_HEATER){
|
||||
heater_setpoint=message.getFloat();
|
||||
|
||||
Serial.print("Incoming set point for ID_S_HEATER:");
|
||||
@@ -1047,23 +1317,44 @@ void incomingMessage(const MyMessage &message) {
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(heater_setpoint,1);
|
||||
heater();//temp ack
|
||||
break;
|
||||
case (V_STATUS || dup_v_status): //V_LIGHT & V_STATUS are the same; does not compile without hack
|
||||
heater_status = message.getBool();
|
||||
Serial.print("Incoming change for ID_S_HEATER:");
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
if(message.sensor == ID_S_HVAC){
|
||||
hvac_SetPointHeat=message.getFloat();
|
||||
Serial.print("Incoming set point for ID_S_HVAC:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(heater_status);
|
||||
heater();//temp ack
|
||||
Serial.println(hvac_SetPointHeat,1);
|
||||
hvac();//temp ack
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
|
||||
case V_HVAC_FLOW_STATE:
|
||||
#ifdef ID_S_HEATER
|
||||
if(message.sensor == ID_S_HEATER){
|
||||
heater_flow_state=message.getString();
|
||||
Serial.print("Incoming flow state change for ID_S_HEATER:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(heater_flow_state);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
if(message.sensor == ID_S_HVAC){
|
||||
hvac_FlowState=message.getString();
|
||||
|
||||
Serial.print("Incoming set point for ID_S_HVAC:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(hvac_FlowState);
|
||||
hvac();//temp ack
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_LOCK
|
||||
case V_LOCK_STATUS:
|
||||
@@ -1115,7 +1406,65 @@ void incomingMessage(const MyMessage &message) {
|
||||
scene();// temp ack
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef ID_S_RGB_LIGHT
|
||||
case V_RGB:
|
||||
rgbState=message.getString();
|
||||
Serial.print("Incoming flow state change for ID_S_RGB_LIGHT:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(rgbState);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_RGBW_LIGHT
|
||||
case V_RGBW:
|
||||
rgbwState=message.getString();
|
||||
Serial.print("Incoming flow state change for ID_S_RGBW_LIGHT:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(rgbwState);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#ifdef ID_S_HVAC
|
||||
// hvac_SetPointHeat
|
||||
// hvac_SetPointCool
|
||||
// hvac_FlowState
|
||||
// hvac_FlowMode
|
||||
// hvac_Speed
|
||||
|
||||
case V_HVAC_SETPOINT_COOL:
|
||||
hvac_SetPointCool=message.getFloat();
|
||||
|
||||
Serial.print("Incoming set point for ID_S_HVAC:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(hvac_SetPointCool,1);
|
||||
hvac();//temp ack
|
||||
break;
|
||||
|
||||
case V_HVAC_FLOW_MODE:
|
||||
hvac_Speed=message.getString();
|
||||
|
||||
Serial.print("Incoming set point for ID_S_HVAC:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(hvac_Speed);
|
||||
hvac();//temp ack
|
||||
break;
|
||||
|
||||
case V_HVAC_SPEED:
|
||||
hvac_FlowMode=message.getString();
|
||||
|
||||
Serial.print("Incoming set point for ID_S_HVAC:");
|
||||
Serial.print(message.sensor);
|
||||
Serial.print(", New status: ");
|
||||
Serial.println(hvac_FlowMode);
|
||||
hvac();//temp ack
|
||||
break;
|
||||
#endif
|
||||
|
||||
default:
|
||||
Serial.print("Unknown/UnImplemented message type: ");
|
||||
Serial.println(message.type);
|
||||
|
||||
@@ -16,6 +16,16 @@ With a Mega you can have them all
|
||||
|
||||
Changes Log
|
||||
-----------------
|
||||
|
||||
2015-09-07
|
||||
Five more sensors
|
||||
S_RGB_LIGHT
|
||||
S_RGBW_LIGHT
|
||||
S_COLOR_SENSOR
|
||||
S_HVAC
|
||||
S_MULTIMETER
|
||||
Consolidated HVAC and HEATER incoming message
|
||||
|
||||
2015-09-06
|
||||
|
||||
Merge with Gizmocuz (implementation of S_HEATER & S_MOISTURE
|
||||
|
||||
Reference in New Issue
Block a user