MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revert "Added interrupt handling and reception queueing for nRF24"

Browse Source 
This reverts commit bfa493ce3e.
This commit is contained in:
Embedded Innovation
2016-05-05 20:37:39 +02:00
parent 1caae29b3c
commit a1d837d4f7
7 changed files with 12 additions and 276 deletions
Download Patch File Download Diff File Expand all files Collapse all files
libraries/MySensors/MyConfig.h
-18
View File
@@ -368,24 +368,6 @@
#endif
#endif
/**
* @def MY_RF24_IRQ_PIN
* @brief Disable RF24 interrupt pin usage by default. Override in sketch if needed.
*/
#define MY_RF24_IRQ_PIN_UNUSED 0
#ifndef MY_RF24_IRQ_PIN
#define MY_RF24_IRQ_PIN MY_RF24_IRQ_PIN_UNUSED
#endif
/**
* @def MY_RF24_MESSAGE_BUFFER_SIZE
* @brief Declare the amount of messages that can be buffered. Override in sketch if needed.
*/
#ifndef MY_RF24_MESSAGE_BUFFER_SIZE
#define MY_RF24_MESSAGE_BUFFER_SIZE (20)
#endif
/**
* @def MY_RF24_PA_LEVEL
* @brief Default RF24 PA level. Override in sketch if needed.
libraries/MySensors/core/MyTransportNRF24.cpp
+9 -68
View File
@@ -20,47 +20,17 @@
#include "MyConfig.h"
#include "MyTransport.h"
#include "drivers/RF24/RF24.h"
#include "drivers/CircularBuffer/CircularBuffer.h"
#if defined(MY_RF24_ENABLE_ENCRYPTION)
#include "drivers/AES/AES.h"
#endif
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
typedef struct _queuedMessage
{
uint8_t m_to; /** Destination address of this message. */
uint8_t m_len; /** Length of the data. */
uint8_t m_data[MAX_MESSAGE_LENGTH]; /** The raw data. */
} queuedMessage;
/** Buffer to store queued messages in. */
static queuedMessage queueStorage[MY_RF24_MESSAGE_BUFFER_SIZE];
/** Circular buffer, which uses the queueStorage and administers stored messages. */
static CircularBuffer<queuedMessage> receiveQueue(queueStorage, MY_RF24_MESSAGE_BUFFER_SIZE);
static volatile uint8_t lostMessageCount = 0;
static void rxCallback(const uint8_t to)
{
if (!receiveQueue.full())
{
queuedMessage* msg = receiveQueue.getFront();
msg->m_len = readMessage(msg->m_data);
(void)receiveQueue.pushFront(msg);
} else {
// TODO: Message is not really lost, as it is still in the nRF FIFO. But once the FIFO is also full messages will get lost.
++lostMessageCount;
}
}
#endif
#if defined(MY_RF24_ENABLE_ENCRYPTION)
AES _aes;
uint8_t _dataenc[32] = {0};
uint8_t _psk[16];
AES _aes;
uint8_t _dataenc[32] = {0};
uint8_t _psk[16];
#endif
bool transportInit() {
#if defined(MY_RF24_ENABLE_ENCRYPTION)
@@ -70,10 +40,7 @@ bool transportInit() {
// Make sure it is purged from memory when set
memset(_psk, 0, 16);
#endif
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
registerReceiveCallback( rxCallback );
#endif
return initializeRF24();
}
@@ -104,39 +71,13 @@ bool transportSend(uint8_t recipient, const void* data, uint8_t len) {
}
bool transportAvailable(uint8_t *to) {
bool avail = false;
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
queuedMessage* msg = receiveQueue.getBack();
if (msg)
{
avail = true;
*to = msg->m_to;
} else {
// TODO: The nRF FIFO could still hold a message
}
#else
avail = IsDataAvailable(to);
#endif
return avail;
bool avail = IsDataAvailable(to);
return avail;
}
uint8_t transportReceive(void* data) {
uint8_t len;
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
// debug(PSTR("lost:%d\n"), lostMessageCount);
queuedMessage* msg = receiveQueue.getBack();
if (msg)
{
len = msg->m_len;
(void)memcpy(data, msg->m_data, len);
(void)receiveQueue.popBack();
} else {
// TODO: The nRF FIFO could still hold a message
}
#else
len = readMessage(data);
#endif
#if defined(MY_RF24_ENABLE_ENCRYPTION)
uint8_t len = readMessage(data);
#if defined(MY_RF24_ENABLE_ENCRYPTION)
// has to be adjusted, WIP!
_aes.set_IV(0);
// decrypt data
libraries/MySensors/drivers/RF24/RF24.cpp
+2 -38
View File
@@ -22,13 +22,8 @@
#include "RF24.h"
static uint8_t MY_RF24_BASE_ADDR[MY_RF24_ADDR_WIDTH] = { MY_RF24_BASE_RADIO_ID };
static uint8_t MY_RF24_NODE_ADDRESS = AUTO;
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
typedef void (*receiveCallbackType)(const uint8_t);
static receiveCallbackType receiveCallback = NULL;
#endif
uint8_t MY_RF24_BASE_ADDR[MY_RF24_ADDR_WIDTH] = { MY_RF24_BASE_RADIO_ID };
uint8_t MY_RF24_NODE_ADDRESS = AUTO;
void csn(bool level) {
digitalWrite(MY_RF24_CS_PIN, level);
@@ -209,45 +204,14 @@ uint8_t getNodeID(void) {
return MY_RF24_NODE_ADDRESS;
}
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
static void irqHandler( void )
{
if (receiveCallback)
{
uint8_t to;
(void)IsDataAvailable(&to);
receiveCallback(to);
} else {
// clear RX interrupt
writeByteRegister(RF24_STATUS, _BV(RX_DR) );
}
}
void registerReceiveCallback( receiveCallbackType cb )
{
noInterrupts();
receiveCallback = cb;
interrupts();
}
#endif
bool initializeRF24(void) {
// Initialize pins
pinMode(MY_RF24_CE_PIN,OUTPUT);
pinMode(MY_RF24_CS_PIN,OUTPUT);
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
pinMode(MY_RF24_IRQ_PIN,INPUT);
#endif
// Initialize SPI
_SPI.begin();
ce(LOW);
csn(HIGH);
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
// assure SPI can be used from interrupt context
_SPI.usingInterrupt(digitalPinToInterrupt(MY_RF24_IRQ_PIN));
// attach interrupt
attachInterrupt(digitalPinToInterrupt(MY_RF24_IRQ_PIN), irqHandler, FALLING);
#endif
// CRC and power up
writeByteRegister(NRF_CONFIG, MY_RF24_CONFIGURATION | _BV(PWR_UP) ) ;
// settle >2ms
libraries/MySensors/drivers/RF24/RF24.h
+1 -5
View File
@@ -38,11 +38,7 @@
#define MY_RF24_SPI_DATA_MODE SPI_MODE0
// settings
#if (MY_RF24_IRQ_PIN != MY_RF24_IRQ_PIN_UNUSED)
#define MY_RF24_CONFIGURATION (uint8_t)((RF24_CRC_16 << 1) | (1 << MASK_TX_DS) | (1 << MASK_MAX_RT))
#else
#define MY_RF24_CONFIGURATION (uint8_t)((RF24_CRC_16 << 1) | (1 << MASK_RX_DR) | (1 << MASK_TX_DS) | (1 << MASK_MAX_RT))
#endif
#define MY_RF24_CONFIGURATION (uint8_t) (RF24_CRC_16 << 1)
#define MY_RF24_FEATURE (uint8_t)( _BV(EN_DPL) | _BV(EN_ACK_PAY) )
#define MY_RF24_RF_SETUP (uint8_t)( ((MY_RF24_DATARATE & 0b10 ) << 4) | ((MY_RF24_DATARATE & 0b01 ) << 3) | (MY_RF24_PA_LEVEL << 1) ) + 1 // +1 for Si24R1
libraries/MySensors/examples/QueueTestGateway/QueueTestGateway.ino
-94
View File
@@ -1,94 +0,0 @@
/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* DESCRIPTION
* The ArduinoGateway prints data received from sensors on the serial link.
* The gateway accepts input on seral which will be sent out on radio network.
*
* The GW code is designed for Arduino Nano 328p / 16MHz
*
* Wire connections (OPTIONAL):
* - Inclusion button should be connected between digital pin 3 and GND
* - RX/TX/ERR leds need to be connected between +5V (anode) and digital pin 6/5/4 with resistor 270-330R in a series
*
* LEDs (OPTIONAL):
* - To use the feature, uncomment MY_LEDS_BLINKING_FEATURE in MyConfig.h
* - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
* - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
* - ERR (red) - fast blink on error during transmission error or recieve crc error
*
*/
#define MY_RADIO_NRF24
#define MY_RF24_CHANNEL (100)
#define MY_RF24_DATARATE (RF24_1MBPS)
#define MY_GATEWAY_SERIAL
#define MY_LEDS_BLINKING_FEATURE
#define MY_DEFAULT_LED_BLINK_PERIOD 50
#define MY_WITH_LEDS_BLINKING_INVERSE
#define MY_RF24_IRQ_PIN (2)
#define MY_DEFAULT_ERR_LED_PIN A0 // Error led pin
#define MY_DEFAULT_RX_LED_PIN A1 // Receive led pin
#define MY_DEFAULT_TX_LED_PIN A2 // the PCB, on board LED
//#define MY_DEBUG
//#define MY_DEBUG_VERBOSE_RF24
#include <SPI.h>
#include <MySensor.h>
void setup() {
}
void presentation() {
}
void receive(const MyMessage &message)
{
static uint16_t prevCount = 0;
uint16_t count = message.getUInt();
if ((count-1) != prevCount)
{
Serial.print(F("Mismatch: prev="));
Serial.print(prevCount);
Serial.print(F(" new="));
Serial.println(count);
}
prevCount = count;
}
const uint8_t maxCount = 100;
void loop() {
static uint8_t count = 0;
++count;
if (count++ > maxCount)
{
count = 0;
delay(1000);
}
}
libraries/MySensors/examples/QueueTestNode/QueueTestNode.ino
-52
View File
@@ -1,52 +0,0 @@
#include <Arduino.h>
#include <Wire.h>
#define MY_RADIO_NRF24
#define MY_RF24_CHANNEL (100)
#define MY_NODE_ID (200)
#define MY_RF24_CE_PIN (9)
#define MY_RF24_CS_PIN (10)
//#define MY_RF24_IRQ_PIN (2)
#define MY_RF24_DATARATE (RF24_1MBPS)
#define MY_DEBUG
//#define MY_DEBUG_VERBOSE_RF24
#include <SPI.h>
#include <MySensor.h>
#undef debug
#ifndef NODEBUG
#define debug(x) Serial.print(x)
#define debugln(x) Serial.println(x)
#else
#define debug(x)
#define debugln(x)
#endif
void presentation()
{
sendSketchInfo("Test", "1.0");
debug("ID: "); debugln(getNodeId());
present(0, S_CUSTOM);
}
void receive(const MyMessage &message)
{
// debug("Message "); debugln(message.type);
}
void setup()
{
debugln(F("---- Starting sensor ----"));
}
void loop()
{
static uint16_t count = 0;
send( MyMessage(0, V_VAR1).set(count) );
++count;
delay(100);
}
libraries/MySensors/keywords.txt
-1
View File
@@ -66,7 +66,6 @@ MY_RF24_ENABLE_ENCRYPTION LITERAL1
MY_RF24_SPI_MAX_SPEED LITERAL1
MY_RF24_CE_PIN LITERAL1
MY_RF24_CS_PIN LITERAL1
MY_RF24_IRQ_PIN LITERAL1
MY_RF24_PA_LEVEL LITERAL1
MY_RF24_CHANNEL LITERAL1
MY_RF24_DATARATE LITERAL1