Minor updates STM32F1 support (#851)

hal/architecture/MyHwSTM32F1.cpp

@@ -1,4 +1,4 @@
-/**
+/**
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -18,8 +18,6 @@
  */
 
 #include "MyHwSTM32F1.h"
-#include <EEPROM.h>
-
 
 /*
 * Pinout STM32F103C8 dev board:
@@ -50,7 +48,6 @@ bool hwInit(void)
 	MY_SERIALDEVICE.begin(MY_BAUD_RATE);
 #endif
 	if (EEPROM.init() == EEPROM_OK) {
-
 		uint16 cnt;
 		EEPROM.count(&cnt);
 		if(cnt>=EEPROM.maxcount()) {
@@ -120,6 +117,31 @@ int8_t hwSleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mo
 	return MY_SLEEP_NOT_POSSIBLE;
 }
 
+
+void hwRandomNumberInit(void)
+{
+	// use internal temperature sensor as noise source
+	adc_reg_map *regs = ADC1->regs;
+	regs->CR2 |= ADC_CR2_TSVREFE;
+	regs->SMPR1 |= ADC_SMPR1_SMP16;
+
+	uint32_t seed = 0;
+	uint16_t currentValue, newValue = 0;
+
+	for (uint8_t i = 0; i<32; i++) {
+		const uint32_t timeout = hwMillis() + 20;
+		while (timeout >= hwMillis()) {
+			newValue = adc_read(ADC1, 16);
+			if (newValue != currentValue) {
+				currentValue = newValue;
+				break;
+			}
+		}
+		seed ^= ( (newValue + hwMillis()) & 7) << i;
+	}
+	randomSeed(seed);
+}
+
 bool hwUniqueID(unique_id_t* uniqueID)
 {
 	(void)memcpy((uint8_t*)uniqueID, (uint32_t*)0x1FFFF7E0, 16);
@@ -142,7 +164,7 @@ uint16_t hwCPUFrequency()
 uint16_t hwFreeMem()
 {
 	//Not yet implemented
-	return 0;
+	return FUNCTION_NOT_SUPPORTED;
 }
 
 void hwDebugPrint(const char *fmt, ...)

hal/architecture/MyHwSTM32F1.h

@@ -24,7 +24,7 @@
 
 #include <libmaple/iwdg.h>
 #include <itoa.h>
-
+#include <EEPROM.h>
 #ifdef __cplusplus
 #include <Arduino.h>
 #endif
@@ -33,37 +33,37 @@
 #define snprintf_P snprintf
 #define vsnprintf_P vsnprintf
 
-
 // emulated EEPROM (experimental)
 #define EEPROM_PAGE_SIZE		(uint16_t)1024
 #define EEPROM_SIZE				(uint16_t)2048
 #define EEPROM_START_ADDRESS	((uint32_t)(0x8000000 + 128 * EEPROM_PAGE_SIZE - 2 * EEPROM_PAGE_SIZE))
 
-
 #ifndef MY_SERIALDEVICE
 #define MY_SERIALDEVICE Serial
 #endif
 
-// Define these as macros to save valuable space
+#ifndef digitalPinToInterrupt
+#define digitalPinToInterrupt(__pin) (__pin)
+#endif
+
 #define hwDigitalWrite(__pin, __value) digitalWrite(__pin, __value)
 #define hwDigitalRead(__pin) digitalRead(__pin)
 #define hwPinMode(__pin, __value) pinMode(__pin, __value)
 #define hwWatchdogReset() iwdg_feed()
 #define hwReboot() nvic_sys_reset()
 #define hwMillis() millis()
-void (*serialEventRun)() = NULL;
 
+extern void serialEventRun(void) __attribute__((weak));
+//void (*serialEventRun)() = NULL;
 bool hwInit(void);
+void hwRandomNumberInit(void);
 void hwReadConfigBlock(void* buf, void* adr, size_t length);
 void hwWriteConfigBlock(void* buf, void* adr, size_t length);
 void hwWriteConfig(const int addr, uint8_t value);
 uint8_t hwReadConfig(const int addr);
 
-
-#define hwRandomNumberInit() randomSeed(analogRead(MY_SIGNING_SOFT_RANDOMSEED_PIN))
-
 #ifndef DOXYGEN
 #define MY_CRITICAL_SECTION
 #endif  /* DOXYGEN */
 
-#endif
+#endif

hal/architecture/MyMainSTM32F1.cpp

@@ -1,4 +1,4 @@
-/**
+/**
  * The MySensors Arduino library handles the wireless radio link and protocol
  * between your home built sensors/actuators and HA controller of choice.
  * The sensors forms a self healing radio network with optional repeaters. Each
@@ -17,8 +17,6 @@
  * version 2 as published by the Free Software Foundation.
  */
 
-// Initialize library and handle sketch functions like we want to
-
 extern "C" void __libc_init_array(void);
 
 // Force init to be called *first*, i.e. before static object allocation.
@@ -28,13 +26,13 @@ __attribute__(( constructor (101))) void premain()
 	init();
 }
 
+// Initialize library and handle sketch functions like we want to
 int main(void)
 {
-	_begin();
-
+	_begin(); // Startup MySensors library
 	for(;;) {
-		_process();
-		if (loop) {
+		_process();	// Process incoming data
+		if (loop) {	 // Call sketch loop
 			loop();
 		}
 		if (serialEventRun) {