Create MQTTGateway.ino

MQTTGateway Beta 0.1
2014-08-13 21:08:51 +02:00
parent 8e53f75619
commit b08e168d16
1 changed files with 83 additions and 0 deletions
@@ -0,0 +1,83 @@
+// 				MyMQTT Gateway 0.1b
+//
+// Created by Daniel Wiegert <daniel.wiegert@gmail.com>
+// Based on Mysensors Ethernet Gateway by Henrik Ekblad <henrik.ekblad@gmail.com>
+// http://www.mysensors.org
+//
+// Requires MySensors lib 1.4b
+// 
+// Don't forget to look at the definitions in MyMQTT.h! 
+// Don't forget to configure Radio pins, IP and MAC-address!
+// 
+// Address-layout is : [MQTT_BROKER_PREFIX]/[NodeID]/[SensorID]/Light
+// NodeID and SensorID is Decimal number.
+// Last segment is translation of the sensor type, look inside MyMQTT.cpp for 
+// the definitions. User can change this to their needs.
+//
+// Features:
+// Supports automatic nodeID delegation
+// Recieve sketchname and version Example: (openhab item)
+//String sketch20 "Node 20 Sketch name [%s]"			(sketch,name,a)	{mqtt="<[mysensor:MyMQTT/20/255/Sketch_name:state:default]"}
+//String sketch21 "Node 21 Sketch name [%s]"			(sketch,name,a)	{mqtt="<[mysensor:MyMQTT/21/255/Sketch_name:state:default]"}
+// ...
+//
+// Todo:
+// DOCUMENTATION...
+// Special commands : clear or set EEPROM Values
+// Special commands : Reboot
+// ...
+
+
+#include <SPI.h>
+#include <MyMQTT.h>
+#include <Ethernet.h>
+
+
+// Use this for IBOARD modded to use standard MISO/MOSI/SCK More information see;
+// http://forum.mysensors.org/topic/224/iboard-cheap-single-board-ethernet-arduino-with-radio/5
+#define RADIO_CE_PIN        3            // radio chip enable
+#define RADIO_SPI_SS_PIN    8            // radio SPI serial select
+
+//Use this for default configured pro mini / nano etc :
+//#define RADIO_CE_PIN        5			// radio chip enable
+//#define RADIO_SPI_SS_PIN    6			// radio SPI serial select 
+
+#define IP_PORT 1883                    // MQTT Listening port
+IPAddress myIp ( 192, 168, 0, 234 );    // Configure your static ip-address here
+byte mac[] = { 0x02, 0xDE, 0xAD, 0x00, 0x00, 0x42 };  // Mac-address - Change this!
+// * NOTE: Keep first byte at x2, x6, xA or xE (replace x with any hex value) for using Locally Administered Address Ranges.
+
+EthernetServer server = EthernetServer(IP_PORT);
+MyMQTT gw(RADIO_CE_PIN, RADIO_SPI_SS_PIN);
+
+void processEthernetMessages() {
+  char inputString[MQTT_MAX_PACKET_SIZE] = "";
+  int inputSize = 0;
+  EthernetClient client = server.available();
+  if (client) {
+    while (client.available()) {
+      char inChar = client.read();
+      inputString[inputSize] = inChar;
+      inputSize++;
+    }
+    gw.processMQTTMessage(inputString, inputSize);
+  }
+}
+
+void writeEthernet(char *writeBuffer, int *writeSize) {
+  server.write(writeBuffer, *writeSize); // Should this really be *writeSize?
+}
+
+int main(void) {
+  init();
+  Ethernet.begin(mac, myIp);
+  delay(1000);   // Wait for Ethernet to get configured.
+  gw.begin(RF24_PA_LEVEL_GW, RF24_CHANNEL, RF24_DATARATE, writeEthernet);
+  server.begin();
+  while (1) {
+    processEthernetMessages();
+    gw.processRadioMessage();
+  }
+}
+
+