Added the forgotten dataRate to begin() default speed is 2MBPS

EthernetGateway/EthernetGateway.ino

@@ -93,7 +93,7 @@ int inputPos = 0;
 void setup()  
 { 
   // Initialize gateway at maximum PA level, channel 70 and callback for write operations 
-  gw.begin(RF24_PA_MAX, 70, writeEthernet);
+  gw.begin(RF24_PA_MAX, 70, RF24_2MBPS, writeEthernet);
  
   Ethernet.begin(mac, myIp);
 

libraries/MySensors/Gateway.cpp

@@ -27,7 +27,7 @@ Gateway::Gateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, uint8_
 	pinEr = _er;
 }
 
-void Gateway::begin(rf24_pa_dbm_e paLevel, uint8_t channel, void (*inDataCallback)(char *)) {
+void Gateway::begin(rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e dataRate, void (*inDataCallback)(char *)) {
 	Serial.begin(BAUD_RATE);
 
 	if (inDataCallback != NULL) {
@@ -66,7 +66,7 @@ void Gateway::begin(rf24_pa_dbm_e paLevel, uint8_t channel, void (*inDataCallbac
 	}
 
 	// Start up the radio library
-	setupRadio(paLevel, channel);
+	setupRadio(paLevel, channel, dataRate);
 	RF24::openReadingPipe(CURRENT_NODE_PIPE, BASE_RADIO_ID);
 	RF24::startListening();
 

libraries/MySensors/Gateway.h

@@ -40,7 +40,7 @@ class Gateway : public Relay
 		Gateway(uint8_t _cepin, uint8_t _cspin, uint8_t _inclusion_time, uint8_t _inclusion_pin, uint8_t _rx, uint8_t _tx, uint8_t _er);
 
 		/* Use this and pass a function that should be called when you want to process commands that arrive from radio network */
-		void begin(rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, void (*dataCallback)(char *)=NULL);
+		void begin(rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, rf24_datarate_e dataRate=RF24_2MBPS, void (*dataCallback)(char *)=NULL);
 
 		void processRadioMessage();
 	    void parseAndSend(char *inputString);

libraries/MySensors/Relay.cpp

@@ -16,8 +16,8 @@ Relay::Relay(uint8_t _cepin, uint8_t _cspin) : Sensor(_cepin, _cspin) {
 }
 
 
-void Relay::begin(uint8_t radioId, rf24_pa_dbm_e paLevel, uint8_t channel) {
-	Sensor::begin(radioId, paLevel, channel);
+void Relay::begin(uint8_t radioId, rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e dataRate) {
+	Sensor::begin(radioId, paLevel, channel, dataRate);
 	// Read routing table from EEPROM
 	for (unsigned int i=0;i<sizeof(childNodeTable);i++) {
 		childNodeTable[i] = EEPROM.read(EEPROM_ROUTES_ADDRESS+i);

libraries/MySensors/Relay.h

@@ -35,11 +35,11 @@ class Relay : public Sensor
 		* Creates a new instance of Relay class.
 		*
 		* @param _cepin The pin attached to RF24 Chip Enable on the RF module (default 9)
-		* @param _cspin The pin attached to RF24 Chip Select (defualt 10)
+		* @param _cspin The pin attached to RF24 Chip Select (default 10)
 		*/
 		Relay(uint8_t _cepin = 9, uint8_t _cspin = 10);
 
-		void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76);
+		void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, rf24_datarate_e dataRate=RF24_2MBPS);
 		boolean messageAvailable();
 		boolean send(message_s message, int length);
 

libraries/MySensors/Sensor.h

@@ -22,7 +22,7 @@
 #include <avr/pgmspace.h>
 #include <stdarg.h>
 
-#define DEBUG
+//#define DEBUG
 
 #ifdef DEBUG
 #define debug(x,...) debugPrint(x, ##__VA_ARGS__)
@@ -129,14 +129,15 @@ class Sensor : public RF24
 	Sensor(uint8_t _cepin=9, uint8_t _cspin=10);
 
 	/**
-	* Begin operation of the sensor net library
+	* Begin operation of the MySensors library
 	*
 	* Call this in setup(), before calling any other sensor net library methods.
 	* @param radioId The unique id (1-254) for this sensor. Default 255 (auto mode).
 	* @param paLevel Radio PA Level for this sensor. Default RF24_PA_MAX
-	* @param channel Radio channel. Default RF24_PA_MAX
+	* @param channel Radio channel. Default is channel 76
+	* @param dataRate Radio transmission speed. Default RF24_2MBPS
 	*/
-	void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76);
+	void begin(uint8_t radioId=AUTO, rf24_pa_dbm_e paLevel=RF24_PA_MAX, uint8_t channel=76, rf24_datarate_e dataRate=RF24_2MBPS);
 
 	uint8_t getRadioId();
 
@@ -257,7 +258,7 @@ class Sensor : public RF24
 	message_s msg;  // Buffer for incoming messages.
 	char convBuffer[20];
 
-	void setupRadio(rf24_pa_dbm_e paLevel, uint8_t channel);
+	void setupRadio(rf24_pa_dbm_e paLevel, uint8_t channel, rf24_datarate_e dataRate);
 	void findRelay();
 	boolean send(message_s message, int length);
 	boolean sendWrite(uint8_t dest, message_s message, int length);