MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

MotionSensor working

Browse Source
This commit is contained in:
Henrik Ekblad
2015-09-12 00:34:44 +02:00
parent 15918b3d3d
commit bdae50886b
143 changed files with 15417 additions and 500 deletions
Download Patch File Download Diff File Expand all files Collapse all files
libraries/MySensors/MyConfig.h
+52 -26
View File
@@ -24,10 +24,10 @@
// Enable debug flag for debug prints. This will add a lot to the size of the final sketch but good
// to see what is actually is happening when developing
#define MY_DEBUG
//#define MY_DEBUG
// Disable this line, If you are using TX(1), RX(0) as normal I/O pin
#define MY_ENABLED_SERIAL
// Enable this line, If you are using TX(1), RX(0) as normal I/O pin
// #define MY_DISABLED_SERIAL
// Serial output baud rate (for debug prints and serial gateway)
#ifndef MY_BAUD_RATE
@@ -112,33 +112,41 @@
/**********************************
* Message Signing Settings
***********************************/
// Disable to completly disable signing functionality in library
// Disable to completely disable signing functionality in library
//#define MY_SIGNING_FEATURE
// Define a suitable timeout for a signature verification session
// Consider the turnaround from a nonce being generated to a signed message being received
// Consider the turn-around from a nonce being generated to a signed message being received
// which might vary, especially in networks with many hops. 5s ought to be enough for anyone.
#ifndef MY_VERIFICATION_TIMEOUT_MS
#define MY_VERIFICATION_TIMEOUT_MS 5000
#endif
// Enable to turn on whitelisting
// Enable to turn on white-listing
// When enabled, a signing node will salt the signature with it's unique signature and nodeId.
// The verifying node will look up the sender in a local table of trusted nodes and
// do the corresponding salting in order to verify the signature.
// For this reason, if whitelisting is enabled on one of the nodes in a sign-verify pair, both
// nodes have to implement whitelisting for this to work.
// Note that a node can still transmit a non-salted message (i.e. have whitelisting disabled)
// to a node that has whitelisting enabled (assuming the receiver does not have a matching entry
// for the sender in it's whitelist)
// For this reason, if white listing is enabled on one of the nodes in a sign-verify pair, both
// nodes have to implement white listing for this to work.
// Note that a node can still transmit a non-salted message (i.e. have white listing disabled)
// to a node that has white listing enabled (assuming the receiver does not have a matching entry
// for the sender in it's white list)
//#define MY_SECURE_NODE_WHITELISTING
// MySigningAtsha204 default setting
#ifndef MY_ATSHA204_PIN
#define MY_ATSHA204_PIN 17 // A3 - pin where ATSHA204 is attached
#endif
// MySigningAtsha204Soft default settings
#ifndef MY_RANDOMSEED_PIN
#define MY_RANDOMSEED_PIN 7 // A7 - Pin used for random generation (do not connect anything to this)
#endif
// Key to use for HMAC calculation in MySigningAtsha204Soft (32 bytes)
#ifndef MY_HMAC_KEY
#define MY_HMAC_KEY 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
#endif
/**********************************
* NRF24L01 Driver Defaults
@@ -155,30 +163,48 @@
#define RF24_BASE_RADIO_ID ((uint64_t)0xA8A8E1FC00LL)
// Enable SOFTSPI for NRF24L01 when using the W5100 Ethernet module
//#define SOFTSPI
#ifdef SOFTSPI
// Define the soft SPI pins used for NRF radio
const uint8_t SOFT_SPI_MISO_PIN = 16;
const uint8_t SOFT_SPI_MOSI_PIN = 15;
const uint8_t SOFT_SPI_SCK_PIN = 14;
#endif
//#define MY_SOFTSPI
#ifndef MY_SOFT_SPI_SCK_PIN
#define MY_SOFT_SPI_SCK_PIN 14
#endif
#ifndef MY_SOFT_SPI_MISO_PIN
#define MY_SOFT_SPI_MISO_PIN 16
#endif
#ifndef MY_SOFT_SPI_MOSI_PIN
#define MY_SOFT_SPI_MOSI_PIN 15
#endif
/**********************************
* RFM69 Driver Defaults
***********************************/
// Default network id. Use the same for all nodes that will talk to each other
#define RFM69_NETWORKID 100
// Default frequency to use. This must match the hardware version of the RFM69 radio (uncomment one):
// #define RFM69_FREQUENCY RF69_433MHZ
#define RFM69_FREQUENCY RF69_868MHZ
//#define FREQUENCY RF69_915MHZ
#ifndef MY_RFM69_FREQUENCY
// #define MY_RFM69_FREQUENCY RF69_433MHZ
#define MY_RFM69_FREQUENCY RF69_868MHZ
//#define MY_RFM69_FREQUENCY RF69_915MHZ
#endif
// Default network id. Use the same for all nodes that will talk to each other
#ifndef MY_RFM69_NETWORKID
#define MY_RFM69_NETWORKID 100
#endif
#ifndef MY_RF69_IRQ_PIN
#define MY_RF69_IRQ_PIN RF69_IRQ_PIN
#endif
#ifndef MY_RF69_SPI_CS
#define MY_RF69_SPI_CS RF69_SPI_CS
#endif
#ifndef MY_RF69_IRQ_NUM
#define MY_RF69_IRQ_NUM RF69_IRQ_NUM
#endif
// Enable this for encryption of packets
//#define RFM69_ENABLE_ENCRYPTION
#define RFM69_ENCRYPTKEY "sampleEncryptKey" //exactly the same 16 characters/bytes on all nodes!
//#define MY_RFM69_ENABLE_ENCRYPTION
#ifndef MY_RFM69_ENCRYPTKEY
#define MY_RFM69_ENCRYPTKEY "sampleEncryptKey" //exactly the same 16 characters/bytes on all nodes!
#endif
/**************************************
* Gateway Transport Ethernet Defaults