MotionSensor working

libraries/MySensors/core/MyHwESP8266.cpp

@@ -0,0 +1,184 @@
+/**
+ * The MySensors Arduino library handles the wireless radio link and protocol
+ * between your home built sensors/actuators and HA controller of choice.
+ * The sensors forms a self healing radio network with optional repeaters. Each
+ * repeater and gateway builds a routing tables in EEPROM which keeps track of the
+ * network topology allowing messages to be routed to nodes.
+ *
+ * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+ * Copyright (C) 2013-2015 Sensnology AB
+ * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
+ *
+ * Documentation: http://www.mysensors.org
+ * Support Forum: http://forum.mysensors.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifdef ARDUINO_ARCH_ESP8266
+ 
+#include "MyHw.h"
+#include "MyHwESP8266.h"
+#include <EEPROM.h>
+
+/*
+int8_t pinIntTrigger = 0;
+void wakeUp()	 //place to send the interrupts
+{
+	pinIntTrigger = 1;
+}
+void wakeUp2()	 //place to send the second interrupts
+{
+	pinIntTrigger = 2;
+}
+
+// Watchdog Timer interrupt service routine. This routine is required
+// to allow automatic WDIF and WDIE bit clearance in hardware.
+ISR (WDT_vect)
+{
+	// WDIE & WDIF is cleared in hardware upon entering this ISR
+	wdt_disable();
+}
+*/
+
+static void hw_initConfigBlock( size_t length = 1024 /*ATMega328 has 1024 bytes*/ )
+{
+  static bool initDone = false;
+  if (!initDone)
+  {
+    EEPROM.begin(length);
+    initDone = true;
+  }
+}
+
+void hw_readConfigBlock(void* buf, void* adr, size_t length)
+{
+  hw_initConfigBlock();
+  uint8_t* dst = static_cast<uint8_t*>(buf);
+  int offs = reinterpret_cast<int>(adr);
+  while (length-- > 0)
+  {
+    *dst++ = EEPROM.read(offs++); 
+  }
+}
+
+void hw_writeConfigBlock(void* buf, void* adr, size_t length)
+{
+  hw_initConfigBlock();
+  uint8_t* src = static_cast<uint8_t*>(buf);
+  int offs = reinterpret_cast<int>(adr);
+  while (length-- > 0)
+  {
+    EEPROM.write(offs++, *src++);
+  }
+  EEPROM.commit();
+}
+
+uint8_t hw_readConfig(int adr)
+{
+  uint8_t value;
+  hw_readConfigBlock(&value, reinterpret_cast<void*>(adr), 1);
+  return value;
+}
+
+void hw_writeConfig(int adr, uint8_t value)
+{
+  uint8_t curr = hw_readConfig(adr);
+  if (curr != value)
+  {
+    hw_writeConfigBlock(&value, reinterpret_cast<void*>(adr), 1); 
+  }
+}
+
+
+
+MyHwESP8266::MyHwESP8266() : MyHw()
+{
+}
+
+
+/*
+
+// The following was redifined as macros to save space
+
+inline uint8_t MyHwATMega328::readConfig(uint8_t pos) {
+	return eeprom_read_byte((uint8_t*)pos);
+}
+
+inline void MyHwATMega328::writeConfig(uint8_t pos, uint8_t value) {
+	eeprom_update_byte((uint8_t*)pos, value);
+}
+
+inline void MyHwATMega328::readConfigBlock(void* buf, void * pos, size_t length) {
+	eeprom_read_block(buf, (void*)pos, length);
+}
+
+inline void MyHwATMega328::writeConfigBlock(void* pos, void* buf, size_t length) {
+	eeprom_write_block((void*)pos, (void*)buf, length);
+}
+
+
+inline void MyHwATMega328::init() {
+	Serial.begin(BAUD_RATE);
+}
+
+inline void MyHwATMega328::watchdogReset() {
+	wdt_reset();
+}
+
+inline void MyHwATMega328::reboot() {
+	wdt_enable(WDTO_15MS); for (;;);
+}
+
+inline unsigned long MyHwATMega328::millis() {
+	return ::millis();
+}
+*/
+
+
+void MyHwESP8266::sleep(unsigned long ms) {
+  // TODO: Not supported!
+}
+
+bool MyHwESP8266::sleep(uint8_t interrupt, uint8_t mode, unsigned long ms) {
+  // TODO: Not supported!
+	return false;
+}
+
+inline uint8_t MyHwESP8266::sleep(uint8_t interrupt1, uint8_t mode1, uint8_t interrupt2, uint8_t mode2, unsigned long ms) {
+  // TODO: Not supported!
+	return 0;
+}
+
+
+
+#ifdef MY_DEBUG
+void MyHwESP8266::debugPrint(bool isGW, const char *fmt, ... ) {
+	char fmtBuffer[300];
+	if (isGW) {
+		// prepend debug message to be handled correctly by controller (C_INTERNAL, I_LOG_MESSAGE)
+		snprintf_P(fmtBuffer, 299, PSTR("0;0;%d;0;%d;"), C_INTERNAL, I_LOG_MESSAGE);
+		Serial.print(fmtBuffer);
+	}
+	va_list args;
+	va_start (args, fmt );
+	va_end (args);
+	if (isGW) {
+		// Truncate message if this is gateway node
+		vsnprintf_P(fmtBuffer, 60, fmt, args);
+		fmtBuffer[59] = '\n';
+		fmtBuffer[60] = '\0';
+	} else {
+		vsnprintf_P(fmtBuffer, 299, fmt, args);
+	}
+	va_end (args);
+	Serial.print(fmtBuffer);
+	Serial.flush();
+
+	//Serial.write(freeRam());
+}
+#endif
+
+#endif  // #ifdef ARDUINO_ARCH_ESP8266