Renamed MySensor.h -> MySensors.h (#481)

* Renamed MySensor.h -> MySensors.h Replaced all references to MySensor.h in examples with MySensors.h * MySensorCore.* renamed to MySensorsCore.* This should make it comply more with naming standards * Updated reference to MySensors core lib
2016-06-21 07:51:51 +02:00
parent 22ce382046
commit be92707cc6
78 changed files with 95 additions and 95 deletions
@@ -18,14 +18,14 @@
 */

 /**
- * @file MySensor.h
+ * @file MySensors.h
 *
 * MySensors main interface (includes all necessary code for the library)
 */
-#ifndef MySensor_h
-#define MySensor_h
+#ifndef MySensors_h
+#define MySensors_h

-#include "core/MySensorCore.h"
+#include "core/MySensorsCore.h"

 // Detect node type
 /**
@@ -290,7 +290,7 @@

 #include "core/MyCapabilities.h"
 #include "core/MyMessage.cpp"
-#include "core/MySensorCore.cpp"
+#include "core/MySensorsCore.cpp"

 #include <Arduino.h>

@@ -20,7 +20,7 @@
 #ifndef MyInclusionMode_h
 #define MyInclusionMode_h

-#include "MySensorCore.h"
+#include "MySensorsCore.h"


 extern bool gatewayTransportSend(MyMessage &message);
@@ -20,7 +20,7 @@
 #ifndef MyOTAFirmwareUpdate_h
 #define MyOTAFirmwareUpdate_h

-#include "MySensorCore.h"
+#include "MySensorsCore.h"

 // Size of each firmware block
 #define FIRMWARE_BLOCK_SIZE	16
@@ -22,7 +22,7 @@
 * it in the sketch:
 * #include "MyPrivateConfig.h"
 * Make sure to include it before
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * Then adapt the contents to your personal preference.
 */

@@ -20,7 +20,7 @@
 #ifndef MyProtocol_h
 #define MyProtocol_h

-#include "MySensorCore.h"
+#include "MySensorsCore.h"


 // parse(message, inputString)
@@ -17,7 +17,7 @@
 * version 2 as published by the Free Software Foundation.
 */

-#include "MySensorCore.h"
+#include "MySensorsCore.h"

 ControllerConfig _cc; // Configuration coming from controller
 NodeConfig _nc; // Essential settings for node to work
@@ -18,8 +18,8 @@
 */


-#ifndef MySensorCore_h
-#define MySensorCore_h
+#ifndef MySensorsCore_h
+#define MySensorsCore_h

 #include "Version.h"   // Auto generated by bot
 #include "MyConfig.h"
@@ -146,10 +146,10 @@
 * @code{.cpp}
 * //#define MY_SIGNING_SOFT
 * #define MY_SIGNING_ATSHA204
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
- * Make sure to set the define before the inclusion of MySensor.h.
+ * Make sure to set the define before the inclusion of MySensors.h.
 * It is legal to mix hardware- and software-based backends in a network. They work together.
 *
 * You also need to decide if the node (or gateway) in question require and verify signatures in addition to calculating them.
@@ -172,7 +172,7 @@
 * #define MY_SIGNING_ATSHA204
 * #define MY_SIGNING_ATSHA204_PIN 4
 * #define MY_SIGNING_REQUEST_SIGNATURES
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 * For the software backed signingbackend, an unconnected analog pin is required to set a random seed for the pseudo-random generator.
@@ -185,7 +185,7 @@
 * #define MY_SIGNING_SOFT
 * #define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
 * #define MY_SIGNING_REQUEST_SIGNATURES
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 *
@@ -326,7 +326,7 @@
 * #define MY_SIGNING_ATSHA204
 * #define MY_SIGNING_REQUEST_SIGNATURES
 * #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}},{.nodeId = 2,.serial = {0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09}}}
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 * In this example, there are two nodes in the whitelist; the gateway, and a separate node that communicates directly with this node (with signed
@@ -338,7 +338,7 @@
 * #define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
 * #define MY_SIGNING_REQUEST_SIGNATURES
 * #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01}},{.nodeId = 2,.serial = {0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09}}}
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 *
@@ -405,7 +405,7 @@
 * @code{.cpp}
 * #define MY_SIGNING_ATSHA204
 * #define MY_SIGNING_REQUEST_SIGNATURES
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 * If you do also want your gateway to require signatures from your lock you just enable the same (or similar if using software signing) settings
@@ -425,7 +425,7 @@
 * #define MY_SIGNING_SOFT
 * #define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
 * #define MY_SIGNING_REQUEST_SIGNATURES
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 *
@@ -435,7 +435,7 @@
 * #define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
 * #define MY_SIGNING_REQUEST_SIGNATURES
 * #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = MOTION_SENSOR_ID,.serial = {0x12,0x34,0x56,0x78,0x90,0x12,0x34,0x56,0x78}}}
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode

@@ -447,7 +447,7 @@
 * Configuration example for the keyfob (keyfob will only transmit to another node and not receive anything):<br>
 * @code{.cpp}
 * #define MY_SIGNING_ATSHA204
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 *
@@ -457,7 +457,7 @@
 * #define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
 * #define MY_SIGNING_REQUEST_SIGNATURES
 * #define MY_SIGNING_NODE_WHITELISTING {{.nodeId = GATEWAY_ADDRESS,.serial = {0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88}},{.nodeId = KEYFOB_ID,.serial = {<FROM ATSHA ON KEYFOB>}}}
- * #include <MySensor.h>
+ * #include <MySensors.h>
 * ...
 * @endcode
 *
@@ -475,7 +475,7 @@
 #ifndef MySigning_h
 #define MySigning_h

-#include "MySensorCore.h"
+#include "MySensorsCore.h"
 #include "drivers/ATSHA204/ATSHA204.h"

 #ifdef MY_SIGNING_NODE_WHITELISTING
@@ -21,7 +21,7 @@
 #define MyTransport_h

 #include <stdint.h>
-#include "MySensorCore.h"
+#include "MySensorsCore.h"

 // Search for a new parent node after this many transmission failures
 #define SEARCH_FAILURES  5
@@ -42,7 +42,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define 	CHILD_ID_MQ                   0 
 /************************Hardware Related Macros************************************/
@@ -36,7 +36,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 int BATTERY_SENSE_PIN = A0;  // select the input pin for the battery sense point

@@ -35,7 +35,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Bounce2.h>

 #define CHILD_ID 3
@@ -38,7 +38,7 @@
 #include <Adafruit_NeoPixel.h>
 #include <MsTimer2.h>
 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Bounce2.h>

 #define LED_CYCLE_MS    30   // Update rate of LEDs, in [ms].
@@ -38,7 +38,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 #define SKETCH_NAME "Binary Sensor"
 #define SKETCH_MAJOR_VER "1"
@@ -46,7 +46,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h> 
+#include <MySensors.h> 

 #define CHILD_ID_AIQ 0
 #define AIQ_SENSOR_ANALOG_PIN 6
@@ -27,7 +27,7 @@
 #define MY_CORE_ONLY

 #include <EEPROM.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 void setup()  
 { 
@@ -33,7 +33,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <DallasTemperature.h>
 #include <OneWire.h>

@@ -43,7 +43,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h> 
+#include <MySensors.h> 

 #define SN "DimmableLED"
 #define SV "1.1"
@@ -37,7 +37,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define CHILD_ID_LIGHT 1

@@ -49,7 +49,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <Bounce2.h>
 #include <Encoder.h>

@@ -34,7 +34,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <NewPing.h>

 #define CHILD_ID 1
@@ -46,7 +46,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define CHILD_ID_DUST 0
 #define DUST_SENSOR_ANALOG_PIN 1
@@ -38,7 +38,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define CHILD_ID_DUST_PM10            0
 #define CHILD_ID_DUST_PM25            1
@@ -42,7 +42,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define DIGITAL_INPUT_SENSOR 3  // The digital input you attached your light sensor.  (Only 2 and 3 generates interrupt!)
 #define PULSE_FACTOR 1000       // Nummber of blinks per KWH of your meeter
@@ -51,7 +51,7 @@ const int offset = 1;

 #include <SPI.h>
 #include <Time.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <TinyGPS++.h>
 #include <SoftwareSerial.h>

@@ -90,7 +90,7 @@

 #include <SPI.h>
 #include <UIPEthernet.h>
-#include <MySensor.h>
+#include <MySensors.h>


 void setup()
@@ -134,7 +134,7 @@
  #include <ESP8266WiFi.h>
 #endif

-#include <MySensor.h>
+#include <MySensors.h>

 void setup() { 
 }
@@ -127,7 +127,7 @@
 */

 #include <ESP8266WiFi.h>
-#include <MySensor.h>
+#include <MySensors.h>

 void setup() { 
 }
@@ -136,7 +136,7 @@
  #include <ESP8266WiFi.h>
 #endif

-#include <MySensor.h>
+#include <MySensors.h>

 void setup() { 
  
@@ -83,7 +83,7 @@
 //#define MY_DEFAULT_TX_LED_PIN  5  // the PCB, on board LED

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 void setup() { 
  // Setup locally attached sensors
@@ -83,7 +83,7 @@
 #define MY_DEFAULT_TX_LED_PIN  6  // the PCB, on board LED

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 void setup() { 
  // Setup locally attached sensors
@@ -115,7 +115,7 @@
  #include <EthernetUdp.h>
 #endif
 #include <Ethernet.h>
-#include <MySensor.h>
+#include <MySensors.h>


 void setup()
@@ -136,7 +136,7 @@
 */

 #include <Ethernet.h>
-#include <MySensor.h>
+#include <MySensors.h>

 void setup() { 
 }
@@ -48,7 +48,7 @@

 // MySensors libraries
 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 // Child ID's of this node
 #define CHILD_1  1
@@ -35,7 +35,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <DHT.h>  

 #define CHILD_ID_HUM 0
@@ -39,7 +39,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <IRLib.h>

 int RECV_PIN = 8;
@@ -93,7 +93,7 @@ Contributed by Jim (BulldogLowell@gmail.com) with much contribution from Pete (p
 #include <Wire.h>
 #include <Time.h>
 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <LiquidCrystal.h>
 #include <LiquidCrystal_I2C.h>

@@ -46,7 +46,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <BH1750.h>
 #include <Wire.h>

@@ -34,7 +34,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define CHILD_ID_LIGHT 0
 #define LIGHT_SENSOR_ANALOG_PIN 0
@@ -11,7 +11,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 // include Playing With Fusion AXS3935 libraries
 #include <PWFusion_AS3935.h>

@@ -43,7 +43,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <MAX6675.h>

 uint8_t CS0 = 4; // CS pin on MAX6675
@@ -16,7 +16,7 @@
 #define MY_NODE_ID 254

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define RADIO_ERROR_LED_PIN 4  // Error led pin
 #define RADIO_RX_LED_PIN    6  // Receive led pin
@@ -35,7 +35,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
 #define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
@@ -54,7 +54,7 @@
 #define MY_RS485_BAUD_RATE 9600

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
 #define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
@@ -53,7 +53,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Oregon.h>

 //Define pin where is 433Mhz receiver (here, pin 2)
@@ -30,7 +30,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 #define COMPARE_PH 1 // Send PH only if changed? 1 = Yes 0 = No

@@ -47,7 +47,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #endif

 #define NEO_PIN      4 // NeoPixels input pin
@@ -16,7 +16,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include "MYSLog.h"

 #define VSN "v1.0"
@@ -35,7 +35,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <Wire.h>
 #include <Adafruit_BMP085.h>

@@ -51,7 +51,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <Wire.h>
 #include <PN532_I2C.h>
 #include <PN532.h>
@@ -37,7 +37,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>	
+#include <MySensors.h>	

 // Arduino pin attached to MOSFET Gate pin
 #define RED_PIN 3 	
@@ -45,7 +45,7 @@
 //#define MY_NODE_ID 7

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <math.h>
 #include <Time.h>

@@ -47,7 +47,7 @@
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <Time.h>  
 #include <DS3232RTC.h>  // A  DS3231/DS3232 library
 #include <Wire.h>
@@ -38,7 +38,7 @@
 #define MY_REPEATER_FEATURE

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 #define RELAY_1  3  // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
 #define NUMBER_OF_RELAYS 1 // Total number of attached relays
@@ -40,7 +40,7 @@
 #define MY_REPEATER_FEATURE

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Bounce2.h>

 #define RELAY_PIN  4  // Arduino Digital I/O pin number for relay 
@@ -39,7 +39,7 @@
 #define MY_REPEATER_FEATURE

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 void setup() {
  
@@ -99,7 +99,7 @@
 #include <SPI.h>
 #include <SoftwareSerial.h>
 #include <Adafruit_FONA.h>
-#include <MySensor.h>
+#include <MySensors.h>

 // Pin definitions and other defines
 #define FONA_RX 2
@@ -59,7 +59,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  


 #define CHILD_ID 99   // Id of the sensor child
@@ -66,7 +66,7 @@
 #define MY_SIGNING_ATSHA204_PIN 17 //!< A3 - pin where ATSHA204 is attached

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>


 #define LOCK_1  3     //!< Arduino Digital I/O pin number for first lock (second on pin+1 etc)
@@ -83,7 +83,7 @@
 #include <sha204_library.h>
 #include <sha204_lib_return_codes.h>
 #define MY_CORE_ONLY
-#include <MySensor.h>
+#include <MySensors.h>

 // Doxygen specific constructs, not included when built normally
 // This is used to enable disabled macros/definitions to be included in the documentation as well.
@@ -12,7 +12,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 #define SketchName "Sensebender Blink"
 #define SketchVersion "20150721"
@@ -56,7 +56,7 @@
 #define MY_OTA_FIRMWARE_FEATURE

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Wire.h>
 #include <SI7021.h>
 #ifndef MY_OTA_FIRMWARE_FEATURE
@@ -39,7 +39,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Servo.h> 

 #define SERVO_DIGITAL_OUT_PIN 3
@@ -69,7 +69,7 @@

 #include <math.h>       // Conversion equation from resistance to %
 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 // Setting up format for reading 3 soil sensors
 #define NUM_READS 10    // Number of sensor reads for filtering
@@ -33,7 +33,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <Time.h>  

 boolean timeReceived = false;
@@ -64,7 +64,7 @@

 #include <Time.h>  
 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  
 #include <stdarg.h>
 #include <UTFT.h>
 #include <UTouch.h>
@@ -44,7 +44,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define UV_SENSOR_ANALOG_PIN 0

@@ -40,7 +40,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
 #include <Wire.h>

 #define CHILD_ID_VIBRATION 0
@@ -42,7 +42,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>  
+#include <MySensors.h>  

 #define DIGITAL_INPUT_SENSOR 3                  // The digital input you attached your sensor.  (Only 2 and 3 generates interrupt!)

@@ -44,7 +44,7 @@
 //#define MY_RADIO_RFM69

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>

 #include <Wire.h>
 #include <Adafruit_BMP085.h>
@@ -35,4 +35,4 @@
 #endif

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -35,4 +35,4 @@
 #endif

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -36,4 +36,4 @@
 #define MY_NODE_LOCK_FEATURE

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -36,4 +36,4 @@
 #define MY_RF24_ENABLE_ENCRYPTION

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -36,4 +36,4 @@
 #define MY_RFM69_ENABLE_ENCRYPTION

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -35,4 +35,4 @@
 #endif

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -35,4 +35,4 @@
 #endif

 #include <SPI.h>
-#include <MySensor.h>
+#include <MySensors.h>
@@ -307,14 +307,14 @@ int FindSensor (const int id, int maxsensor)
 {
  int EepromId=0;
  for (int i=0; i<maxsensor; i++){
-    #ifdef MySensor_h
+    #ifdef MySensors_h
      int SensorID = loadState(i);
    #else
      int SensorID = EEPROM.read(i);
    #endif
    if(SensorID == 255)
    {
-      #ifdef MySensor_h
+      #ifdef MySensors_h
        saveState(i,id);
      #else
        EEPROM.write(i,id);