Merge pull request #98 from tbowmo/master

Corrected fuses

.gitignore

@@ -0,0 +1,2 @@
+*~
+*bak

hardware/MySensors/avr/boards.txt

@@ -10,9 +10,9 @@ MysensorsMicro.upload.speed=57600
 MysensorsMicro.bootloader.tool=arduino:avrdude
 MysensorsMicro.bootloader.unlock_bits=0x3F
 MysensorsMicro.bootloader.lock_bits=0x0F
-MysensorsMicro.bootloader.low_fuses=0xFF
-MysensorsMicro.bootloader.high_fuses=0xDA
-MysensorsMicro.bootloader.extended_fuses=0x05
+MysensorsMicro.bootloader.low_fuses=0xE2
+MysensorsMicro.bootloader.high_fuses=0xD2
+MysensorsMicro.bootloader.extended_fuses=0xFE
 MysensorsMicro.bootloader.file=DualOptiboot/optiboot_atmega328p-pro8.hex
 
 MysensorsMicro.build.board=AVR_MICRO8

libraries/MySensors/examples/MysensorMicro/MysensorMicro.ino

@@ -23,6 +23,15 @@
 #define CHILD_ID_HUM   2
 #define CHILD_ID_BATT  199
 
+// How many milli seconds between each measurement
+#define MEASURE_INTERVAL 60000
+
+// FORCE_TRANSMIT_INTERVAL, this number of times of wakeup, the sensor is forced to report all values to the controller
+#define FORCE_TRANSMIT_INTERVAL 30 
+
+// When MEASURE_INTERVAL is 60000 and FORCE_TRANSMIT_INTERVAL is 30, we force a transmission every 30 minutes.
+// Between the forced transmissions a tranmission will only occur if the measured value differs from the previous measurement
+
 //Pin definitions
 #define TEST_PIN       A0
 #define LED_PIN        A2
@@ -31,12 +40,6 @@
 const int sha204Pin = ATSHA204_PIN;
 atsha204Class sha204(sha204Pin);
 
-
-#define MEASURE_INTERVAL 60000
-
-// FORCE_TRANSMIT_INTERVAL, this number of times of wakeup, the sensor is forced to report all values to the controller
-#define FORCE_TRANSMIT_INTERVAL 30 
-
 SI7021 humiditySensor;
 SPIFlash flash(8, 0x1F65);
 
@@ -97,7 +100,7 @@ void loop() {
   bool forceTransmit = false;
   
   if (measureCount > FORCE_TRANSMIT_INTERVAL
-  ) {// Every 60th time we wake up, force a transmission on all sensors.
+  ) { // force a transmission
     forceTransmit = true; 
     measureCount = 0;
   }