MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

RS485 transport layer

Browse Source 
Note this is still untested as I haven't got any RS485 modules.
This commit is contained in:
Henrik Ekblad
2015-10-12 18:48:28 +02:00
parent 79d837825f
commit cf232b1baa
16 changed files with 1499 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
libraries/MySensors/MyConfig.h
+14 -2
View File
@@ -53,11 +53,11 @@
* Radio selection and node config
***********************************/
// Selecting radio transport is optional (for a gateway node).
// Selecting uplink transport layer is optional (for a gateway node).
//#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69
//#define MY_RS485
// Node id defaults to AUTO (tries to fetch id from controller)
#ifndef MY_NODE_ID
@@ -233,6 +233,18 @@
#define MY_SIGNING_SOFT_HMAC_KEY 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
#endif
/**********************************
* RS485 Driver Defaults
***********************************/
#ifndef MY_RS485_BAUD_RATE
#define MY_RS485_BAUD_RATE 9600
#endif
#ifndef MY_RS485_MAX_MESSAGE_LENGTH
#define MY_RS485_MAX_MESSAGE_LENGTH 40
#endif
/**********************************
* NRF24L01 Driver Defaults
***********************************/
libraries/MySensors/MySensor.h
+8 -5
View File
@@ -34,7 +34,7 @@
#endif
// Enable radio "feature" if one of the radio types was enabled
#if defined(MY_RADIO_NRF24) || defined(MY_RADIO_RFM69)
#if defined(MY_RADIO_NRF24) || defined(MY_RADIO_RFM69) || defined(MY_RS485)
#define MY_RADIO_FEATURE
#endif
@@ -140,7 +140,7 @@
// RADIO
#if defined(MY_RADIO_NRF24) || defined(MY_RADIO_RFM69)
#if defined(MY_RADIO_NRF24) || defined(MY_RADIO_RFM69) || defined(MY_RS485)
// SOFTSPI
#ifdef MY_SOFTSPI
#if defined(ARDUINO_ARCH_ESP8266)
@@ -155,8 +155,8 @@
#include "drivers/SPIFlash/SPIFlash.cpp"
#endif
#include "core/MyTransport.cpp"
#if defined(MY_RADIO_NRF24) && defined(MY_RADIO_RFM69)
#error Only one radio driver can be activated
#if (defined(MY_RADIO_NRF24) && defined(MY_RADIO_RFM69)) || (defined(MY_RADIO_NRF24) && defined(MY_RS485)) || (defined(MY_RADIO_RFM69) && defined(MY_RS485))
#error Only one forward link driver can be activated
#endif
#if defined(MY_RADIO_NRF24)
#if defined(MY_RF24_ENABLE_ENCRYPTION)
@@ -164,6 +164,9 @@
#endif
#include "drivers/RF24/RF24.cpp"
#include "core/MyTransportNRF24.cpp"
#elif defined(MY_RS485)
#include "drivers/AltSoftSerial/AltSoftSerial.cpp"
#include "core/MyTransportRS485.cpp"
#elif defined(MY_RADIO_RFM69)
#include "drivers/RFM69/RFM69.cpp"
#include "core/MyTransportRFM69.cpp"
@@ -184,7 +187,7 @@
#endif
#if !defined(MY_GATEWAY_FEATURE) && !defined(MY_RADIO_FEATURE)
#error No radio or gateway feature activated. This means nowhere to send messages! Pretty pointless.
#error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.
#endif
libraries/MySensors/core/MyTransportRS485.cpp
+320
View File
@@ -0,0 +1,320 @@
/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* -------------------------------------------------------------------------------
*
* Copyright (c) 2013, Majenko Technologies and S.J.Hoeksma
* Copyright (c) 2015, LeoDesigner
* https://github.com/leodesigner/mysensors-serial-transport
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation are those
* of the authors and should not be interpreted as representing official policies,
* either expressed or implied, of Majenko Technologies.
********************************************************************************/
// transport(Serial,0,-1); // serial port, node, dePin (-1 disabled)
// Serial Transport
#include "MyConfig.h"
#include "MyTransport.h"
#include <stdint.h>
#if defined(ARDUINO) && ARDUINO >= 100
#include <Arduino.h>
#else
#include <WProgram.h>
#endif
#include "MyTransport.h"
// We only use SYS_PACK in this application
#define ICSC_SYS_PACK 0x58
// Receiving header information
char _header[6];
// Reception state machine control and storage variables
unsigned char _recPhase;
unsigned char _recPos;
unsigned char _recCommand;
unsigned char _recLen;
unsigned char _recStation;
unsigned char _recSender;
unsigned char _recCS;
unsigned char _recCalcCS;
AltSoftSerial _dev;
unsigned char _nodeId;
char _data[MY_RS485_MAX_MESSAGE_LENGTH];
uint8_t _packet_len;
unsigned char _packet_from;
bool _packet_received;
// Packet wrapping characters, defined in standard ASCII table
#define SOH 1
#define STX 2
#define ETX 3
#define EOT 4
//Reset the state machine and release the data pointer
void _serialReset(){
_recPhase = 0;
_recPos = 0;
_recLen = 0;
_recCommand = 0;
_recCS = 0;
_recCalcCS = 0;
}
// This is the main reception state machine. Progress through the states
// is keyed on either special control characters, or counted number of bytes
// received. If all the data is in the right format, and the calculated
// checksum matches the received checksum, AND the destination station is
// our station ID, then look for a registered command that matches the
// command code. If all the above is true, execute the command's
// function.
boolean _serialProcess()
{
char inch;
unsigned char i;
if (!_dev.available()) return false;
while(_dev.available()) {
inch = _dev.read();
switch(_recPhase) {
// Case 0 looks for the header. Bytes arrive in the serial interface and get
// shifted through a header buffer. When the start and end characters in
// the buffer match the SOH/STX pair, and the destination station ID matches
// our ID, save the header information and progress to the next state.
case 0:
memcpy(&_header[0],&_header[1],5);
_header[5] = inch;
if ((_header[0] == SOH) && (_header[5] == STX) && (_header[1] != _header[2])) {
_recCalcCS = 0;
_recStation = _header[1];
_recSender = _header[2];
_recCommand = _header[3];
_recLen = _header[4];
for (i=1; i<=4; i++) {
_recCalcCS += _header[i];
}
_recPhase = 1;
_recPos = 0;
//Check if we should process this message
//We reject the message if we are the sender
//We reject if we are not the receiver and message is not a broadcast
if ((_recSender == _nodeId) ||
(_recStation != _nodeId &&
_recStation != BROADCAST_ADDRESS)) {
_dev.print(" wrongid: ");
_dev.print(_recStation);
_dev.print(" - ");
_dev.println(_nodeId);
_serialReset();
break;
}
if (_recLen == 0) {
_recPhase = 2;
}
}
break;
// Case 1 receives the data portion of the packet. Read in "_recLen" number
// of bytes and store them in the _data array.
case 1:
_data[_recPos++] = inch;
_recCalcCS += inch;
if (_recPos == _recLen) {
_recPhase = 2;
}
break;
// After the data comes a single ETX character. Do we have it? If not,
// reset the state machine to default and start looking for a new header.
case 2:
// Packet properly terminated?
if (inch == ETX) {
_recPhase = 3;
} else {
_serialReset();
}
break;
// Next comes the checksum. We have already calculated it from the incoming
// data, so just store the incoming checksum byte for later.
case 3:
_recCS = inch;
_recPhase = 4;
break;
// The final state - check the last character is EOT and that the checksum matches.
// If that test passes, then look for a valid command callback to execute.
// Execute it if found.
case 4:
if (inch == EOT) {
if (_recCS == _recCalcCS) {
// First, check for system level commands. It is possible
// to register your own callback as well for system level
// commands which will be called after the system default
// hook.
switch (_recCommand) {
case ICSC_SYS_PACK:
_packet_from = _recSender;
_packet_len = _recLen;
_packet_received = true;
break;
}
}
}
//Clear the data
_serialReset();
//Return true, we have processed one command
return true;
break;
}
}
return true;
}
bool transportSend(uint8_t to, const void* data, uint8_t len)
{
const char *datap = static_cast<char const *>(data);
unsigned char i;
unsigned char cs = 0;
unsigned char del;
// This is how many times to try and transmit before failing.
unsigned char timeout = 10;
// Let's start out by looking for a collision. If there has been anything seen in
// the last millisecond, then wait for a random time and check again.
while (_serialProcess()) {
del = rand() % 20;
for (i = 0; i < del; i++) {
delay(1);
_serialProcess();
}
timeout--;
if (timeout == 0) {
// Failed to transmit!!!
return false;
}
}
// Start of header by writing multiple SOH
for(byte w=0;w<1;w++) _dev.write(SOH);
_dev.write(to); // Destination address
cs += to;
_dev.write(_nodeId); // Source address
cs += _nodeId;
_dev.write(ICSC_SYS_PACK); // Command code
cs += ICSC_SYS_PACK;
_dev.write(len); // Length of text
cs += len;
_dev.write(STX); // Start of text
for(i=0; i<len; i++) {
_dev.write(datap[i]); // Text bytes
cs += datap[i];
}
_dev.write(ETX); // End of text
_dev.write(cs);
_dev.write(EOT);
return true;
}
bool transportInit() {
// Reset the state machine
_dev.begin(MY_RS485_BAUD_RATE);
_serialReset();
return true;
}
void transportSetAddress(uint8_t address) {
_nodeId = address;
}
uint8_t transportGetAddress() {
return _nodeId;
}
bool transportAvailable(uint8_t *to) {
_serialProcess();
if (_packet_received == true) {
if (_recStation==BROADCAST_ADDRESS) {
*to = BROADCAST_ADDRESS;
}
else { *to = _nodeId; }
}
return _packet_received;
}
uint8_t transportReceive(void* data) {
if (_packet_received) {
memcpy(data,_data,_packet_len);
_packet_received = false;
return _packet_len;
}
else {
return (0);
}
}
void transportPowerDown() {
// Nothing to shut down here
}
libraries/MySensors/drivers/AltSoftSerial/AltSoftSerial.cpp
+317
View File
@@ -0,0 +1,317 @@
/* An Alternative Software Serial Library
* http://www.pjrc.com/teensy/td_libs_AltSoftSerial.html
* Copyright (c) 2014 PJRC.COM, LLC, Paul Stoffregen, paul@pjrc.com
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Version 1.2: Support Teensy 3.x
//
// Version 1.1: Improve performance in receiver code
//
// Version 1.0: Initial Release
#include "AltSoftSerial.h"
#include "config/AltSoftSerial_Boards.h"
#include "config/AltSoftSerial_Timers.h"
/****************************************/
/** Initialization **/
/****************************************/
static uint16_t ticks_per_bit=0;
bool AltSoftSerial::timing_error=false;
static uint8_t rx_state;
static uint8_t rx_byte;
static uint8_t rx_bit = 0;
static uint16_t rx_target;
static uint16_t rx_stop_ticks=0;
static volatile uint8_t rx_buffer_head;
static volatile uint8_t rx_buffer_tail;
#define RX_BUFFER_SIZE 80
static volatile uint8_t rx_buffer[RX_BUFFER_SIZE];
static volatile uint8_t tx_state=0;
static uint8_t tx_byte;
static uint8_t tx_bit;
static volatile uint8_t tx_buffer_head;
static volatile uint8_t tx_buffer_tail;
#define TX_BUFFER_SIZE 68
static volatile uint8_t tx_buffer[RX_BUFFER_SIZE];
#ifndef INPUT_PULLUP
#define INPUT_PULLUP INPUT
#endif
void AltSoftSerial::init(uint32_t cycles_per_bit)
{
if (cycles_per_bit < 7085) {
CONFIG_TIMER_NOPRESCALE();
} else {
cycles_per_bit /= 8;
if (cycles_per_bit < 7085) {
CONFIG_TIMER_PRESCALE_8();
} else {
return; // minimum 283 baud at 16 MHz clock
}
}
ticks_per_bit = cycles_per_bit;
rx_stop_ticks = cycles_per_bit * 37 / 4;
pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
pinMode(OUTPUT_COMPARE_A_PIN, OUTPUT);
rx_state = 0;
rx_buffer_head = 0;
rx_buffer_tail = 0;
tx_state = 0;
tx_buffer_head = 0;
tx_buffer_tail = 0;
ENABLE_INT_INPUT_CAPTURE();
}
void AltSoftSerial::end(void)
{
DISABLE_INT_COMPARE_B();
DISABLE_INT_INPUT_CAPTURE();
flushInput();
flushOutput();
DISABLE_INT_COMPARE_A();
// TODO: restore timer to original settings?
}
/****************************************/
/** Transmission **/
/****************************************/
void AltSoftSerial::writeByte(uint8_t b)
{
uint8_t intr_state, head;
head = tx_buffer_head + 1;
if (head >= TX_BUFFER_SIZE) head = 0;
while (tx_buffer_tail == head) ; // wait until space in buffer
intr_state = SREG;
cli();
if (tx_state) {
tx_buffer[head] = b;
tx_buffer_head = head;
} else {
tx_state = 1;
tx_byte = b;
tx_bit = 0;
ENABLE_INT_COMPARE_A();
CONFIG_MATCH_CLEAR();
SET_COMPARE_A(GET_TIMER_COUNT() + 16);
}
SREG = intr_state;
}
ISR(COMPARE_A_INTERRUPT)
{
uint8_t state, byte, bit, head, tail;
uint16_t target;
state = tx_state;
byte = tx_byte;
target = GET_COMPARE_A();
while (state < 9) {
target += ticks_per_bit;
bit = byte & 1;
byte >>= 1;
state++;
if (bit != tx_bit) {
if (bit) {
CONFIG_MATCH_SET();
} else {
CONFIG_MATCH_CLEAR();
}
SET_COMPARE_A(target);
tx_bit = bit;
tx_byte = byte;
tx_state = state;
// TODO: how to detect timing_error?
return;
}
}
if (state == 9) {
tx_state = 10;
CONFIG_MATCH_SET();
SET_COMPARE_A(target + ticks_per_bit);
return;
}
head = tx_buffer_head;
tail = tx_buffer_tail;
if (head == tail) {
tx_state = 0;
CONFIG_MATCH_NORMAL();
DISABLE_INT_COMPARE_A();
} else {
tx_state = 1;
if (++tail >= TX_BUFFER_SIZE) tail = 0;
tx_buffer_tail = tail;
tx_byte = tx_buffer[tail];
tx_bit = 0;
CONFIG_MATCH_CLEAR();
SET_COMPARE_A(target + ticks_per_bit);
// TODO: how to detect timing_error?
}
}
void AltSoftSerial::flushOutput(void)
{
while (tx_state) /* wait */ ;
}
/****************************************/
/** Reception **/
/****************************************/
ISR(CAPTURE_INTERRUPT)
{
uint8_t state, bit, head;
uint16_t capture, target;
int16_t offset;
capture = GET_INPUT_CAPTURE();
bit = rx_bit;
if (bit) {
CONFIG_CAPTURE_FALLING_EDGE();
rx_bit = 0;
} else {
CONFIG_CAPTURE_RISING_EDGE();
rx_bit = 0x80;
}
state = rx_state;
if (state == 0) {
if (!bit) {
SET_COMPARE_B(capture + rx_stop_ticks);
ENABLE_INT_COMPARE_B();
rx_target = capture + ticks_per_bit + ticks_per_bit/2;
rx_state = 1;
}
} else {
target = rx_target;
while (1) {
offset = capture - target;
if (offset < 0) break;
rx_byte = (rx_byte >> 1) | rx_bit;
target += ticks_per_bit;
state++;
if (state >= 9) {
DISABLE_INT_COMPARE_B();
head = rx_buffer_head + 1;
if (head >= RX_BUFFER_SIZE) head = 0;
if (head != rx_buffer_tail) {
rx_buffer[head] = rx_byte;
rx_buffer_head = head;
}
CONFIG_CAPTURE_FALLING_EDGE();
rx_bit = 0;
rx_state = 0;
return;
}
}
rx_target = target;
rx_state = state;
}
//if (GET_TIMER_COUNT() - capture > ticks_per_bit) AltSoftSerial::timing_error = true;
}
ISR(COMPARE_B_INTERRUPT)
{
uint8_t head, state, bit;
DISABLE_INT_COMPARE_B();
CONFIG_CAPTURE_FALLING_EDGE();
state = rx_state;
bit = rx_bit ^ 0x80;
while (state < 9) {
rx_byte = (rx_byte >> 1) | bit;
state++;
}
head = rx_buffer_head + 1;
if (head >= RX_BUFFER_SIZE) head = 0;
if (head != rx_buffer_tail) {
rx_buffer[head] = rx_byte;
rx_buffer_head = head;
}
rx_state = 0;
CONFIG_CAPTURE_FALLING_EDGE();
rx_bit = 0;
}
int AltSoftSerial::read(void)
{
uint8_t head, tail, out;
head = rx_buffer_head;
tail = rx_buffer_tail;
if (head == tail) return -1;
if (++tail >= RX_BUFFER_SIZE) tail = 0;
out = rx_buffer[tail];
rx_buffer_tail = tail;
return out;
}
int AltSoftSerial::peek(void)
{
uint8_t head, tail;
head = rx_buffer_head;
tail = rx_buffer_tail;
if (head == tail) return -1;
return rx_buffer[tail];
}
int AltSoftSerial::available(void)
{
uint8_t head, tail;
head = rx_buffer_head;
tail = rx_buffer_tail;
if (head >= tail) return head - tail;
return RX_BUFFER_SIZE + head - tail;
}
void AltSoftSerial::flushInput(void)
{
rx_buffer_head = rx_buffer_tail;
}
#ifdef ALTSS_USE_FTM0
void ftm0_isr(void)
{
uint32_t flags = FTM0_STATUS;
FTM0_STATUS = 0;
if (flags & (1<<5)) altss_capture_interrupt();
if (flags & (1<<6)) altss_compare_a_interrupt();
if (flags & (1<<0)) altss_compare_b_interrupt();
}
#endif
libraries/MySensors/drivers/AltSoftSerial/AltSoftSerial.h
+75
View File
@@ -0,0 +1,75 @@
/* An Alternative Software Serial Library
* http://www.pjrc.com/teensy/td_libs_AltSoftSerial.html
* Copyright (c) 2014 PJRC.COM, LLC, Paul Stoffregen, paul@pjrc.com
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef AltSoftSerial_h
#define AltSoftSerial_h
#include <inttypes.h>
#if ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#include "pins_arduino.h"
#endif
#if defined(__arm__) && defined(CORE_TEENSY)
#define ALTSS_BASE_FREQ F_BUS
#else
#define ALTSS_BASE_FREQ F_CPU
#endif
class AltSoftSerial : public Stream
{
public:
AltSoftSerial() { }
~AltSoftSerial() { end(); }
static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
static void end();
int peek();
int read();
int available();
#if ARDUINO >= 100
size_t write(uint8_t byte) { writeByte(byte); return 1; }
void flush() { flushOutput(); }
#else
void write(uint8_t byte) { writeByte(byte); }
void flush() { flushInput(); }
#endif
using Print::write;
static void flushInput();
static void flushOutput();
// for drop-in compatibility with NewSoftSerial, rxPin & txPin ignored
//AltSoftSerial(uint8_t rxPin, uint8_t txPin, bool inverse = false) { }
bool listen() { return false; }
bool isListening() { return true; }
bool overflow() { bool r = timing_error; timing_error = false; return r; }
static int library_version() { return 1; }
static void enable_timer0(bool) { }
static bool timing_error;
private:
static void init(uint32_t cycles_per_bit);
static void writeByte(uint8_t byte);
};
#endif
libraries/MySensors/drivers/AltSoftSerial/README.md
+9
View File
@@ -0,0 +1,9 @@
#AltSoftSerial Library#
Improved software emulated serial, using hardware timers for precise signal
timing and availability of CPU time for other libraries to respond to interrupts
during data AltSoftSerial data transmission and reception.
http://www.pjrc.com/teensy/td_libs_AltSoftSerial.html
![AltSoftSerial on Teensy 2.0](http://www.pjrc.com/teensy/td_libs_AltSoftSerial_2.jpg)
libraries/MySensors/drivers/AltSoftSerial/config/AltSoftSerial_Boards.h
+138
View File
@@ -0,0 +1,138 @@
/* An Alternative Software Serial Library
* http://www.pjrc.com/teensy/td_libs_AltSoftSerial.html
* Copyright (c) 2014 PJRC.COM, LLC, Paul Stoffregen, paul@pjrc.com
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Teensy 2.0
//
#if defined(__AVR_ATmega32U4__) && defined(CORE_TEENSY)
//#define ALTSS_USE_TIMER1
//#define INPUT_CAPTURE_PIN 22 // receive
//#define OUTPUT_COMPARE_A_PIN 14 // transmit
//#define OUTPUT_COMPARE_B_PIN 15 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 4 // unusable PWM
#define ALTSS_USE_TIMER3
#define INPUT_CAPTURE_PIN 10 // receive
#define OUTPUT_COMPARE_A_PIN 9 // transmit
// Teensy++ 2.0
//
#elif defined(__AVR_AT90USB1286__) && defined(CORE_TEENSY)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 4 // receive
#define OUTPUT_COMPARE_A_PIN 25 // transmit
#define OUTPUT_COMPARE_B_PIN 26 // unusable PWM
#define OUTPUT_COMPARE_C_PIN 27 // unusable PWM
//#define ALTSS_USE_TIMER3
//#define INPUT_CAPTURE_PIN 17 // receive
//#define OUTPUT_COMPARE_A_PIN 16 // transmit
//#define OUTPUT_COMPARE_B_PIN 15 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 14 // unusable PWM
// Teensy 3.0 & 3.1
//
#elif defined(__MK20DX128__) || defined(__MK20DX256__)
#define ALTSS_USE_FTM0
#define INPUT_CAPTURE_PIN 20 // receive (FTM0_CH5)
#define OUTPUT_COMPARE_A_PIN 21 // transmit (FTM0_CH6)
#define OUTPUT_COMPARE_B_PIN 22 // unusable PWM (FTM0_CH0)
#define OUTPUT_COMPARE_C_PIN 23 // PWM usable fixed freq
#define OUTPUT_COMPARE_D_PIN 5 // PWM usable fixed freq
#define OUTPUT_COMPARE_E_PIN 6 // PWM usable fixed freq
#define OUTPUT_COMPARE_F_PIN 9 // PWM usable fixed freq
#define OUTPUT_COMPARE_G_PIN 10 // PWM usable fixed freq
// Wiring-S
//
#elif defined(__AVR_ATmega644P__) && defined(WIRING)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 6 // receive
#define OUTPUT_COMPARE_A_PIN 5 // transmit
#define OUTPUT_COMPARE_B_PIN 4 // unusable PWM
// Arduino Uno, Duemilanove, LilyPad, etc
//
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 8 // receive
#define OUTPUT_COMPARE_A_PIN 9 // transmit
#define OUTPUT_COMPARE_B_PIN 10 // unusable PWM
// Arduino Leonardo & Yun (from Cristian Maglie)
//
#elif defined(ARDUINO_AVR_YUN) || defined(ARDUINO_AVR_LEONARDO) || defined(__AVR_ATmega32U4__)
//#define ALTSS_USE_TIMER1
//#define INPUT_CAPTURE_PIN 4 // receive
//#define OUTPUT_COMPARE_A_PIN 9 // transmit
//#define OUTPUT_COMPARE_B_PIN 10 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 11 // unusable PWM
#define ALTSS_USE_TIMER3
#define INPUT_CAPTURE_PIN 13 // receive
#define OUTPUT_COMPARE_A_PIN 5 // transmit
// Arduino Mega
//
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
//#define ALTSS_USE_TIMER4
//#define INPUT_CAPTURE_PIN 49 // receive
//#define OUTPUT_COMPARE_A_PIN 6 // transmit
//#define OUTPUT_COMPARE_B_PIN 7 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 8 // unusable PWM
#define ALTSS_USE_TIMER5
#define INPUT_CAPTURE_PIN 48 // receive
#define OUTPUT_COMPARE_A_PIN 46 // transmit
#define OUTPUT_COMPARE_B_PIN 45 // unusable PWM
#define OUTPUT_COMPARE_C_PIN 44 // unusable PWM
// Sanguino
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 14 // receive
#define OUTPUT_COMPARE_A_PIN 13 // transmit
#define OUTPUT_COMPARE_B_PIN 12 // unusable PWM
// Unknown board
#else
#error "Please define your board timer and pins"
#endif
libraries/MySensors/drivers/AltSoftSerial/config/AltSoftSerial_Timers.h
+174
View File
@@ -0,0 +1,174 @@
/* An Alternative Software Serial Library
* http://www.pjrc.com/teensy/td_libs_AltSoftSerial.html
* Copyright (c) 2014 PJRC.COM, LLC, Paul Stoffregen, paul@pjrc.com
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#if defined(ALTSS_USE_TIMER1)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK1 = 0, TCCR1A = 0, TCCR1B = (1<<ICNC1) | (1<<CS10))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK1 = 0, TCCR1A = 0, TCCR1B = (1<<ICNC1) | (1<<CS11))
#define CONFIG_MATCH_NORMAL() (TCCR1A = TCCR1A & ~((1<<COM1A1) | (1<<COM1A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR1A = (TCCR1A & ~(1<<COM1A1)) | (1<<COM1A0))
#define CONFIG_MATCH_CLEAR() (TCCR1A = (TCCR1A | (1<<COM1A1)) & ~(1<<COM1A0))
#define CONFIG_MATCH_SET() (TCCR1A = TCCR1A | ((1<<COM1A1) | (1<<COM1A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR1B &= ~(1<<ICES1))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR1B |= (1<<ICES1))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR1 = (1<<ICF1), TIMSK1 = (1<<ICIE1))
#define ENABLE_INT_COMPARE_A() (TIFR1 = (1<<OCF1A), TIMSK1 |= (1<<OCIE1A))
#define ENABLE_INT_COMPARE_B() (TIFR1 = (1<<OCF1B), TIMSK1 |= (1<<OCIE1B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK1 &= ~(1<<ICIE1))
#define DISABLE_INT_COMPARE_A() (TIMSK1 &= ~(1<<OCIE1A))
#define DISABLE_INT_COMPARE_B() (TIMSK1 &= ~(1<<OCIE1B))
#define GET_TIMER_COUNT() (TCNT1)
#define GET_INPUT_CAPTURE() (ICR1)
#define GET_COMPARE_A() (OCR1A)
#define GET_COMPARE_B() (OCR1B)
#define SET_COMPARE_A(val) (OCR1A = (val))
#define SET_COMPARE_B(val) (OCR1B = (val))
#define CAPTURE_INTERRUPT TIMER1_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER1_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER1_COMPB_vect
#elif defined(ALTSS_USE_TIMER3)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK3 = 0, TCCR3A = 0, TCCR3B = (1<<ICNC3) | (1<<CS30))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK3 = 0, TCCR3A = 0, TCCR3B = (1<<ICNC3) | (1<<CS31))
#define CONFIG_MATCH_NORMAL() (TCCR3A = TCCR3A & ~((1<<COM3A1) | (1<<COM3A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR3A = (TCCR3A & ~(1<<COM3A1)) | (1<<COM3A0))
#define CONFIG_MATCH_CLEAR() (TCCR3A = (TCCR3A | (1<<COM3A1)) & ~(1<<COM3A0))
#define CONFIG_MATCH_SET() (TCCR3A = TCCR3A | ((1<<COM3A1) | (1<<COM3A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR3B &= ~(1<<ICES3))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR3B |= (1<<ICES3))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR3 = (1<<ICF3), TIMSK3 = (1<<ICIE3))
#define ENABLE_INT_COMPARE_A() (TIFR3 = (1<<OCF3A), TIMSK3 |= (1<<OCIE3A))
#define ENABLE_INT_COMPARE_B() (TIFR3 = (1<<OCF3B), TIMSK3 |= (1<<OCIE3B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK3 &= ~(1<<ICIE3))
#define DISABLE_INT_COMPARE_A() (TIMSK3 &= ~(1<<OCIE3A))
#define DISABLE_INT_COMPARE_B() (TIMSK3 &= ~(1<<OCIE3B))
#define GET_TIMER_COUNT() (TCNT3)
#define GET_INPUT_CAPTURE() (ICR3)
#define GET_COMPARE_A() (OCR3A)
#define GET_COMPARE_B() (OCR3B)
#define SET_COMPARE_A(val) (OCR3A = (val))
#define SET_COMPARE_B(val) (OCR3B = (val))
#define CAPTURE_INTERRUPT TIMER3_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER3_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER3_COMPB_vect
#elif defined(ALTSS_USE_TIMER4)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK4 = 0, TCCR4A = 0, TCCR4B = (1<<ICNC4) | (1<<CS40))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK4 = 0, TCCR4A = 0, TCCR4B = (1<<ICNC4) | (1<<CS41))
#define CONFIG_MATCH_NORMAL() (TCCR4A = TCCR4A & ~((1<<COM4A1) | (1<<COM4A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR4A = (TCCR4A & ~(1<<COM4A1)) | (1<<COM4A0))
#define CONFIG_MATCH_CLEAR() (TCCR4A = (TCCR4A | (1<<COM4A1)) & ~(1<<COM4A0))
#define CONFIG_MATCH_SET() (TCCR4A = TCCR4A | ((1<<COM4A1) | (1<<COM4A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR4B &= ~(1<<ICES4))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR4B |= (1<<ICES4))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR4 = (1<<ICF4), TIMSK4 = (1<<ICIE4))
#define ENABLE_INT_COMPARE_A() (TIFR4 = (1<<OCF4A), TIMSK4 |= (1<<OCIE4A))
#define ENABLE_INT_COMPARE_B() (TIFR4 = (1<<OCF4B), TIMSK4 |= (1<<OCIE4B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK4 &= ~(1<<ICIE4))
#define DISABLE_INT_COMPARE_A() (TIMSK4 &= ~(1<<OCIE4A))
#define DISABLE_INT_COMPARE_B() (TIMSK4 &= ~(1<<OCIE4B))
#define GET_TIMER_COUNT() (TCNT4)
#define GET_INPUT_CAPTURE() (ICR4)
#define GET_COMPARE_A() (OCR4A)
#define GET_COMPARE_B() (OCR4B)
#define SET_COMPARE_A(val) (OCR4A = (val))
#define SET_COMPARE_B(val) (OCR4B = (val))
#define CAPTURE_INTERRUPT TIMER4_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER4_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER4_COMPB_vect
#elif defined(ALTSS_USE_TIMER5)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK5 = 0, TCCR5A = 0, TCCR5B = (1<<ICNC5) | (1<<CS50))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK5 = 0, TCCR5A = 0, TCCR5B = (1<<ICNC5) | (1<<CS51))
#define CONFIG_MATCH_NORMAL() (TCCR5A = TCCR5A & ~((1<<COM5A1) | (1<<COM5A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR5A = (TCCR5A & ~(1<<COM5A1)) | (1<<COM5A0))
#define CONFIG_MATCH_CLEAR() (TCCR5A = (TCCR5A | (1<<COM5A1)) & ~(1<<COM5A0))
#define CONFIG_MATCH_SET() (TCCR5A = TCCR5A | ((1<<COM5A1) | (1<<COM5A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR5B &= ~(1<<ICES5))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR5B |= (1<<ICES5))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR5 = (1<<ICF5), TIMSK5 = (1<<ICIE5))
#define ENABLE_INT_COMPARE_A() (TIFR5 = (1<<OCF5A), TIMSK5 |= (1<<OCIE5A))
#define ENABLE_INT_COMPARE_B() (TIFR5 = (1<<OCF5B), TIMSK5 |= (1<<OCIE5B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK5 &= ~(1<<ICIE5))
#define DISABLE_INT_COMPARE_A() (TIMSK5 &= ~(1<<OCIE5A))
#define DISABLE_INT_COMPARE_B() (TIMSK5 &= ~(1<<OCIE5B))
#define GET_TIMER_COUNT() (TCNT5)
#define GET_INPUT_CAPTURE() (ICR5)
#define GET_COMPARE_A() (OCR5A)
#define GET_COMPARE_B() (OCR5B)
#define SET_COMPARE_A(val) (OCR5A = (val))
#define SET_COMPARE_B(val) (OCR5B = (val))
#define CAPTURE_INTERRUPT TIMER5_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER5_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER5_COMPB_vect
#elif defined(ALTSS_USE_FTM0)
// CH5 = input capture (input, pin 20)
// CH6 = compare a (output, pin 21)
// CH0 = compare b (input timeout)
#define CONFIG_TIMER_NOPRESCALE() FTM0_SC = 0; FTM0_CNT = 0; FTM0_MOD = 0xFFFF; \
FTM0_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0); \
digitalWriteFast(21, HIGH); \
NVIC_SET_PRIORITY(IRQ_FTM0, 48); \
NVIC_ENABLE_IRQ(IRQ_FTM0);
#define CONFIG_TIMER_PRESCALE_8() FTM0_SC = 0; FTM0_CNT = 0; FTM0_MOD = 0xFFFF; \
FTM0_SC = FTM_SC_CLKS(1) | FTM_SC_PS(3); \
digitalWriteFast(21, HIGH); \
NVIC_SET_PRIORITY(IRQ_FTM0, 48); \
NVIC_ENABLE_IRQ(IRQ_FTM0);
#define CONFIG_MATCH_NORMAL() (FTM0_C6SC = 0)
#define CONFIG_MATCH_TOGGLE() (FTM0_C6SC = (FTM0_C6SC & 0xC3) | 0x14)
#define CONFIG_MATCH_CLEAR() (FTM0_C6SC = (FTM0_C6SC & 0xC3) | 0x18)
#define CONFIG_MATCH_SET() (FTM0_C6SC = (FTM0_C6SC & 0xC3) | 0x1C)
#define CONFIG_CAPTURE_FALLING_EDGE() (FTM0_C5SC = (FTM0_C5SC & 0xC3) | 0x08)
#define CONFIG_CAPTURE_RISING_EDGE() (FTM0_C5SC = (FTM0_C5SC & 0xC3) | 0x04)
#define ENABLE_INT_INPUT_CAPTURE() FTM0_C5SC = 0x48; \
CORE_PIN20_CONFIG = PORT_PCR_MUX(4)|PORT_PCR_PE|PORT_PCR_PS
#define ENABLE_INT_COMPARE_A() FTM0_C6SC |= 0x40; \
CORE_PIN21_CONFIG = PORT_PCR_MUX(4)|PORT_PCR_DSE|PORT_PCR_SRE
#define ENABLE_INT_COMPARE_B() (FTM0_C0SC |= 0x40)
#define DISABLE_INT_INPUT_CAPTURE() FTM0_C5SC &= ~0x40; \
CORE_PIN20_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_PE|PORT_PCR_PS
#define DISABLE_INT_COMPARE_A() FTM0_C6SC &= ~0x40; \
CORE_PIN21_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_DSE|PORT_PCR_SRE; \
digitalWriteFast(21, HIGH)
#define DISABLE_INT_COMPARE_B() (FTM0_C0SC &= ~0x40)
#define GET_TIMER_COUNT() (FTM0_CNT)
#define GET_INPUT_CAPTURE() (FTM0_C5V)
#define GET_COMPARE_A() (FTM0_C6V)
#define GET_COMPARE_B() (FTM0_C0V)
#define SET_COMPARE_A(val) (FTM0_C6V = val)
#define SET_COMPARE_B(val) (FTM0_C0V = val)
#define CAPTURE_INTERRUPT altss_capture_interrupt
#define COMPARE_A_INTERRUPT altss_compare_a_interrupt
#define COMPARE_B_INTERRUPT altss_compare_b_interrupt
#ifdef ISR
#undef ISR
#endif
#define ISR(f) static void f (void)
#endif
libraries/MySensors/drivers/AltSoftSerial/config/known_boards.h
+103
View File
@@ -0,0 +1,103 @@
// Teensy 2.0
//
#if defined(__AVR_ATmega32U4__) && defined(CORE_TEENSY)
//#define ALTSS_USE_TIMER1
//#define INPUT_CAPTURE_PIN 22 // receive
//#define OUTPUT_COMPARE_A_PIN 14 // transmit
//#define OUTPUT_COMPARE_B_PIN 15 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 4 // unusable PWM
#define ALTSS_USE_TIMER3
#define INPUT_CAPTURE_PIN 10 // receive
#define OUTPUT_COMPARE_A_PIN 9 // transmit
// Teensy++ 2.0
//
#elif defined(__AVR_AT90USB1286__) && defined(CORE_TEENSY)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 4 // receive
#define OUTPUT_COMPARE_A_PIN 25 // transmit
#define OUTPUT_COMPARE_B_PIN 26 // unusable PWM
#define OUTPUT_COMPARE_C_PIN 27 // unusable PWM
//#define ALTSS_USE_TIMER3
//#define INPUT_CAPTURE_PIN 17 // receive
//#define OUTPUT_COMPARE_A_PIN 16 // transmit
//#define OUTPUT_COMPARE_B_PIN 15 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 14 // unusable PWM
// Wiring-S
//
#elif defined(__AVR_ATmega644P__) && defined(WIRING)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 6 // receive
#define OUTPUT_COMPARE_A_PIN 5 // transmit
#define OUTPUT_COMPARE_B_PIN 4 // unusable PWM
// Arduino Uno, Duemilanove, LilyPad, etc
//
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 8 // receive
#define OUTPUT_COMPARE_A_PIN 9 // transmit
#define OUTPUT_COMPARE_B_PIN 10 // unusable PWM
// Arduino Leonardo & Yun (from Cristian Maglie)
//
#elif defined(ARDUINO_AVR_YUN) || defined(ARDUINO_AVR_LEONARDO)
//#define ALTSS_USE_TIMER1
//#define INPUT_CAPTURE_PIN 4 // receive
//#define OUTPUT_COMPARE_A_PIN 9 // transmit
//#define OUTPUT_COMPARE_B_PIN 10 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 11 // unusable PWM
#define ALTSS_USE_TIMER3
#define INPUT_CAPTURE_PIN 13 // receive
#define OUTPUT_COMPARE_A_PIN 5 // transmit
// Arduino Mega
//
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
//#define ALTSS_USE_TIMER4
//#define INPUT_CAPTURE_PIN 49 // receive
//#define OUTPUT_COMPARE_A_PIN 6 // transmit
//#define OUTPUT_COMPARE_B_PIN 7 // unusable PWM
//#define OUTPUT_COMPARE_C_PIN 8 // unusable PWM
#define ALTSS_USE_TIMER5
#define INPUT_CAPTURE_PIN 48 // receive
#define OUTPUT_COMPARE_A_PIN 46 // transmit
#define OUTPUT_COMPARE_B_PIN 45 // unusable PWM
#define OUTPUT_COMPARE_C_PIN 44 // unusable PWM
// Sanguino
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
#define ALTSS_USE_TIMER1
#define INPUT_CAPTURE_PIN 14 // receive
#define OUTPUT_COMPARE_A_PIN 13 // transmit
#define OUTPUT_COMPARE_B_PIN 12 // unusable PWM
// Unknown board
#else
#error "Please define your board timer and pins"
#endif
libraries/MySensors/drivers/AltSoftSerial/config/known_timers.h
+106
View File
@@ -0,0 +1,106 @@
#if defined(ALTSS_USE_TIMER1)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK1 = 0, TCCR1A = 0, TCCR1B = (1<<ICNC1) | (1<<CS10))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK1 = 0, TCCR1A = 0, TCCR1B = (1<<ICNC1) | (1<<CS11))
#define CONFIG_MATCH_NORMAL() (TCCR1A = TCCR1A & ~((1<<COM1A1) | (1<<COM1A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR1A = (TCCR1A & ~(1<<COM1A1)) | (1<<COM1A0))
#define CONFIG_MATCH_CLEAR() (TCCR1A = (TCCR1A | (1<<COM1A1)) & ~(1<<COM1A0))
#define CONFIG_MATCH_SET() (TCCR1A = TCCR1A | ((1<<COM1A1) | (1<<COM1A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR1B &= ~(1<<ICES1))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR1B |= (1<<ICES1))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR1 = (1<<ICF1), TIMSK1 = (1<<ICIE1))
#define ENABLE_INT_COMPARE_A() (TIFR1 = (1<<OCF1A), TIMSK1 |= (1<<OCIE1A))
#define ENABLE_INT_COMPARE_B() (TIFR1 = (1<<OCF1B), TIMSK1 |= (1<<OCIE1B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK1 &= ~(1<<ICIE1))
#define DISABLE_INT_COMPARE_A() (TIMSK1 &= ~(1<<OCIE1A))
#define DISABLE_INT_COMPARE_B() (TIMSK1 &= ~(1<<OCIE1B))
#define GET_TIMER_COUNT() (TCNT1)
#define GET_INPUT_CAPTURE() (ICR1)
#define GET_COMPARE_A() (OCR1A)
#define GET_COMPARE_B() (OCR1B)
#define SET_COMPARE_A(val) (OCR1A = (val))
#define SET_COMPARE_B(val) (OCR1B = (val))
#define CAPTURE_INTERRUPT TIMER1_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER1_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER1_COMPB_vect
#elif defined(ALTSS_USE_TIMER3)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK3 = 0, TCCR3A = 0, TCCR3B = (1<<ICNC3) | (1<<CS30))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK3 = 0, TCCR3A = 0, TCCR3B = (1<<ICNC3) | (1<<CS31))
#define CONFIG_MATCH_NORMAL() (TCCR3A = TCCR3A & ~((1<<COM3A1) | (1<<COM3A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR3A = (TCCR3A & ~(1<<COM3A1)) | (1<<COM3A0))
#define CONFIG_MATCH_CLEAR() (TCCR3A = (TCCR3A | (1<<COM3A1)) & ~(1<<COM3A0))
#define CONFIG_MATCH_SET() (TCCR3A = TCCR3A | ((1<<COM3A1) | (1<<COM3A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR3B &= ~(1<<ICES3))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR3B |= (1<<ICES3))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR3 = (1<<ICF3), TIMSK3 = (1<<ICIE3))
#define ENABLE_INT_COMPARE_A() (TIFR3 = (1<<OCF3A), TIMSK3 |= (1<<OCIE3A))
#define ENABLE_INT_COMPARE_B() (TIFR3 = (1<<OCF3B), TIMSK3 |= (1<<OCIE3B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK3 &= ~(1<<ICIE3))
#define DISABLE_INT_COMPARE_A() (TIMSK3 &= ~(1<<OCIE3A))
#define DISABLE_INT_COMPARE_B() (TIMSK3 &= ~(1<<OCIE3B))
#define GET_TIMER_COUNT() (TCNT3)
#define GET_INPUT_CAPTURE() (ICR3)
#define GET_COMPARE_A() (OCR3A)
#define GET_COMPARE_B() (OCR3B)
#define SET_COMPARE_A(val) (OCR3A = (val))
#define SET_COMPARE_B(val) (OCR3B = (val))
#define CAPTURE_INTERRUPT TIMER3_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER3_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER3_COMPB_vect
#elif defined(ALTSS_USE_TIMER4)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK4 = 0, TCCR4A = 0, TCCR4B = (1<<ICNC4) | (1<<CS40))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK4 = 0, TCCR4A = 0, TCCR4B = (1<<ICNC4) | (1<<CS41))
#define CONFIG_MATCH_NORMAL() (TCCR4A = TCCR4A & ~((1<<COM4A1) | (1<<COM4A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR4A = (TCCR4A & ~(1<<COM4A1)) | (1<<COM4A0))
#define CONFIG_MATCH_CLEAR() (TCCR4A = (TCCR4A | (1<<COM4A1)) & ~(1<<COM4A0))
#define CONFIG_MATCH_SET() (TCCR4A = TCCR4A | ((1<<COM4A1) | (1<<COM4A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR4B &= ~(1<<ICES4))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR4B |= (1<<ICES4))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR4 = (1<<ICF4), TIMSK4 = (1<<ICIE4))
#define ENABLE_INT_COMPARE_A() (TIFR4 = (1<<OCF4A), TIMSK4 |= (1<<OCIE4A))
#define ENABLE_INT_COMPARE_B() (TIFR4 = (1<<OCF4B), TIMSK4 |= (1<<OCIE4B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK4 &= ~(1<<ICIE4))
#define DISABLE_INT_COMPARE_A() (TIMSK4 &= ~(1<<OCIE4A))
#define DISABLE_INT_COMPARE_B() (TIMSK4 &= ~(1<<OCIE4B))
#define GET_TIMER_COUNT() (TCNT4)
#define GET_INPUT_CAPTURE() (ICR4)
#define GET_COMPARE_A() (OCR4A)
#define GET_COMPARE_B() (OCR4B)
#define SET_COMPARE_A(val) (OCR4A = (val))
#define SET_COMPARE_B(val) (OCR4B = (val))
#define CAPTURE_INTERRUPT TIMER4_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER4_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER4_COMPB_vect
#elif defined(ALTSS_USE_TIMER5)
#define CONFIG_TIMER_NOPRESCALE() (TIMSK5 = 0, TCCR5A = 0, TCCR5B = (1<<ICNC5) | (1<<CS50))
#define CONFIG_TIMER_PRESCALE_8() (TIMSK5 = 0, TCCR5A = 0, TCCR5B = (1<<ICNC5) | (1<<CS51))
#define CONFIG_MATCH_NORMAL() (TCCR5A = TCCR5A & ~((1<<COM5A1) | (1<<COM5A0)))
#define CONFIG_MATCH_TOGGLE() (TCCR5A = (TCCR5A & ~(1<<COM5A1)) | (1<<COM5A0))
#define CONFIG_MATCH_CLEAR() (TCCR5A = (TCCR5A | (1<<COM5A1)) & ~(1<<COM5A0))
#define CONFIG_MATCH_SET() (TCCR5A = TCCR5A | ((1<<COM5A1) | (1<<COM5A0)))
#define CONFIG_CAPTURE_FALLING_EDGE() (TCCR5B &= ~(1<<ICES5))
#define CONFIG_CAPTURE_RISING_EDGE() (TCCR5B |= (1<<ICES5))
#define ENABLE_INT_INPUT_CAPTURE() (TIFR5 = (1<<ICF5), TIMSK5 = (1<<ICIE5))
#define ENABLE_INT_COMPARE_A() (TIFR5 = (1<<OCF5A), TIMSK5 |= (1<<OCIE5A))
#define ENABLE_INT_COMPARE_B() (TIFR5 = (1<<OCF5B), TIMSK5 |= (1<<OCIE5B))
#define DISABLE_INT_INPUT_CAPTURE() (TIMSK5 &= ~(1<<ICIE5))
#define DISABLE_INT_COMPARE_A() (TIMSK5 &= ~(1<<OCIE5A))
#define DISABLE_INT_COMPARE_B() (TIMSK5 &= ~(1<<OCIE5B))
#define GET_TIMER_COUNT() (TCNT5)
#define GET_INPUT_CAPTURE() (ICR5)
#define GET_COMPARE_A() (OCR5A)
#define GET_COMPARE_B() (OCR5B)
#define SET_COMPARE_A(val) (OCR5A = (val))
#define SET_COMPARE_B(val) (OCR5B = (val))
#define CAPTURE_INTERRUPT TIMER5_CAPT_vect
#define COMPARE_A_INTERRUPT TIMER5_COMPA_vect
#define COMPARE_B_INTERRUPT TIMER5_COMPB_vect
#endif
libraries/MySensors/drivers/AltSoftSerial/examples/Test/Test.pde
+38
View File
@@ -0,0 +1,38 @@
#include <AltSoftSerial.h>
// AltSoftSerial always uses these pins:
//
// Board Transmit Receive PWM Unusable
// ----- -------- ------- ------------
// Teensy 3.0 & 3.1 21 20 22
// Teensy 2.0 9 10 (none)
// Teensy++ 2.0 25 4 26, 27
// Arduino Uno 9 8 10
// Arduino Leonardo 5 13 (none)
// Arduino Mega 46 48 44, 45
// Wiring-S 5 6 4
// Sanguino 13 14 12
AltSoftSerial altSerial;
void setup() {
Serial.begin(9600);
while (!Serial) ; // wait for Arduino Serial Monitor to open
Serial.println("AltSoftSerial Test Begin");
altSerial.begin(9600);
altSerial.println("Hello World");
}
void loop() {
char c;
if (Serial.available()) {
c = Serial.read();
altSerial.print(c);
}
if (altSerial.available()) {
c = altSerial.read();
Serial.print(c);
}
}
libraries/MySensors/drivers/AltSoftSerial/keywords.txt
+4
View File
@@ -0,0 +1,4 @@
AltSoftSerial KEYWORD1
active KEYWORD2
overflow KEYWORD2
library_version KEYWORD2
libraries/MySensors/examples/GatewaySerialRS485/GatewaySerialRS485.ino
+100
View File
@@ -0,0 +1,100 @@
/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* DESCRIPTION
* The RS485 Gateway prints data received from sensors on the serial link.
* The gateway accepts input on seral which will be sent out on
* the RS485 link.
*
* Wire connections (OPTIONAL):
* - Inclusion button should be connected between digital pin 3 and GND
* - RX/TX/ERR leds need to be connected between +5V (anode) and digital pin 6/5/4 with resistor 270-330R in a series
*
* LEDs (OPTIONAL):
* - To use the feature, uncomment MY_LEDS_BLINKING_FEATURE in MyConfig.h
* - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
* - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
* - ERR (red) - fast blink on error during transmission error or recieve crc error
*
* The gateway uses AltSoftSerial to handle two serial links
* on one Arduino. Use the following pins for RS485 link
*
* Board Transmit Receive PWM Unusable
* ----- -------- ------- ------------
* Teensy 3.0 & 3.1 21 20 22
* Teensy 2.0 9 10 (none)
* Teensy++ 2.0 25 4 26, 27
* Arduino Uno 9 8 10
* Arduino Leonardo 5 13 (none)
* Arduino Mega 46 48 44, 45
* Wiring-S 5 6 4
* Sanguino 13 14 12
*
*/
// Enable debug prints to serial monitor
#define MY_DEBUG
// Enable RS485 transport layer
#define MY_RS485
// Set RS485 baud rate to use
#define MY_RS485_BAUD_RATE 9600
// Enable serial gateway
#define MY_GATEWAY_SERIAL
// Flash leds on rx/tx/err
#define MY_LEDS_BLINKING_FEATURE
// Set blinking period
#define MY_DEFAULT_LED_BLINK_PERIOD 300
// Enable inclusion mode
#define MY_INCLUSION_MODE_FEATURE
// Enable Inclusion mode button on gateway
#define MY_INCLUSION_BUTTON_FEATURE
// Set inclusion mode duration (in seconds)
#define MY_INCLUSION_MODE_DURATION 60
// Digital pin used for inclusion mode button
#define MY_INCLUSION_MODE_BUTTON_PIN 3
#define MY_DEFAULT_ERR_LED_PIN 7 // Error led pin
#define MY_DEFAULT_RX_LED_PIN 8 // Receive led pin
#define MY_DEFAULT_TX_LED_PIN 9 // the PCB, on board LED
#include <SPI.h>
#include <MySensor.h>
void setup() {
// Setup locally attached sensors
}
void presentation() {
// Present locally attached sensors
}
void loop() {
// Send locally attached sensor data here
}
libraries/MySensors/examples/MotionSensorRS485/MotionSensorRS485.ino
+89
View File
@@ -0,0 +1,89 @@
/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* REVISION HISTORY
* Version 1.0 - Henrik Ekblad
*
* DESCRIPTION
* This is an example of sensors using RS485 as transport layer
*
* Motion Sensor example using HC-SR501
* http://www.mysensors.org/build/motion
*
* The transport uses AltSoftSerial to handle two serial links
* on one Arduino. Use the following pins for RS485 link
*
* Board Transmit Receive PWM Unusable
* ----- -------- ------- ------------
* Teensy 3.0 & 3.1 21 20 22
* Teensy 2.0 9 10 (none)
* Teensy++ 2.0 25 4 26, 27
* Arduino Uno 9 8 10
* Arduino Leonardo 5 13 (none)
* Arduino Mega 46 48 44, 45
* Wiring-S 5 6 4
* Sanguino 13 14 12 *
*
*/
// Enable RS485 transport layer
#define MY_RS485
// Set RS485 baud rate to use
#define MY_RS485_BAUD_RATE 9600
#include <SPI.h>
#include <MySensor.h>
unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
#define DIGITAL_INPUT_SENSOR 3 // The digital input you attached your motion sensor. (Only 2 and 3 generates interrupt!)
#define INTERRUPT DIGITAL_INPUT_SENSOR-2 // Usually the interrupt = pin -2 (on uno/nano anyway)
#define CHILD_ID 1 // Id of the sensor child
// Initialize motion message
MyMessage msg(CHILD_ID, V_TRIPPED);
void setup()
{
pinMode(DIGITAL_INPUT_SENSOR, INPUT); // sets the motion sensor digital pin as input
}
void presentation() {
// Send the sketch version information to the gateway and Controller
sendSketchInfo("Motion Sensor", "1.0");
// Register all sensors to gw (they will be created as child devices)
present(CHILD_ID, S_MOTION);
}
void loop()
{
// Read digital motion value
boolean tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH;
Serial.println(tripped);
send(msg.set(tripped?"1":"0")); // Send tripped value to gw
// Sleep until interrupt comes in on motion sensor. Send update every two minute.
sleep(INTERRUPT,CHANGE, SLEEP_TIME);
}
libraries/MySensors/examples/ParkingSensor/ParkingSensor.ino
+1 -2
View File
@@ -68,7 +68,7 @@
// Note that for older NeoPixel strips you might need to change the third parameter--see the strandtest
// example for more information on possible values.
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, NEO_PIN, NEO_GRB + NEO_KHZ400);
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, NEO_PIN, NEO_GRB + NEO_KHZ800);
NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE); // NewPing setup of pins and maximum distance.
@@ -107,7 +107,6 @@ void presentation() {
void loop() {
unsigned long now = millis();
unsigned int fullDist = (sonar.ping_median() / US_ROUNDTRIP_CM);
// Serial.println(fullDist);
int displayDist = min(fullDist, MAX_DISTANCE);
libraries/MySensors/keywords.txt
+3
View File
@@ -96,3 +96,6 @@ MY_ESP8266_PASSWORD LITERAL1
MY_IP_GATEWAY_ADDRESS LITERAL1
MY_IP_SUBNET_ADDRESS LITERAL1
MY_W5100_SPI_EN LITERAL1
MY_RS485 LITERAL1
MY_RS485_BAUD_RATE LITERAL1
MY_RS485_MAX_MESSAGE_LENGTH LITERAL1