MySensors/RPi/RF24/examples/gettingstarted.cpp

/*
 Copyright (C) 2011 J. Coliz <maniacbug@ymail.com>

 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License
 version 2 as published by the Free Software Foundation.

 03/17/2013 : Charles-Henri Hallard (http://hallard.me)
              Modified to use with Arduipi board http://hallard.me/arduipi
						  Changed to use modified bcm2835 and RF24 library
TMRh20 2014 - Updated to work with optimized RF24 Arduino library

 */

/**
 * Example RF Radio Ping Pair
 *
 * This is an example of how to use the RF24 class on RPi, communicating to an Arduino running
 * the GettingStarted sketch.
 */

#include <cstdlib>
#include <iostream>
#include <sstream>
#include <string>
#include "./RF24.h"

using namespace std;
//
// Hardware configuration
//

// CE Pin, CSN Pin, SPI Speed

// Setup for GPIO 22 CE and GPIO 25 CSN with SPI Speed @ 1Mhz
//RF24 radio(RPI_V2_GPIO_P1_22, RPI_V2_GPIO_P1_18, BCM2835_SPI_SPEED_1MHZ);

// Setup for GPIO 22 CE and CE0 CSN with SPI Speed @ 4Mhz
//RF24 radio(RPI_V2_GPIO_P1_15, BCM2835_SPI_CS0, BCM2835_SPI_SPEED_4MHZ);

// Setup for GPIO 22 CE and CE1 CSN with SPI Speed @ 8Mhz
//RF24 radio(RPI_V2_GPIO_P1_15, RPI_V2_GPIO_P1_26, BCM2835_SPI_SPEED_8MHZ);
RF24 radio(RPI_V2_GPIO_P1_15,BCM2835_SPI_CS0, BCM2835_SPI_SPEED_8MHZ);



// Radio pipe addresses for the 2 nodes to communicate.
const uint64_t pipes[2] = { 0xABCDABCD71LL, 0x544d52687CLL };

bool role_ping_out = 1, role_pong_back = 0;
bool role = 0;

int main(int argc, char** argv){


  // Print preamble:
  printf("RF24/examples/pingtest/\n");

  // Setup and configure rf radio
  radio.begin();

  // optionally, increase the delay between retries & # of retries
  radio.setRetries(15,15);

  // Dump the configuration of the rf unit for debugging
  radio.printDetails();


/********* Role chooser ***********/

  printf("\n ************ Role Setup ***********\n");
  string input = "";
  char myChar = {0};
  cout << "Choose a role: Enter 0 for pong_back, 1 for ping_out (CTRL+C to exit) \n>";
  getline(cin,input);

  if(input.length() == 1) {
	myChar = input[0];
	if(myChar == '0'){
		cout << "Role: Pong Back, awaiting transmission " << endl << endl;
	}else{  cout << "Role: Ping Out, starting transmission " << endl << endl;
		role = role_ping_out;
	}
  }
/***********************************/
  // This simple sketch opens two pipes for these two nodes to communicate
  // back and forth.

    if ( role == role_ping_out )    {
      radio.openWritingPipe(pipes[0]);
      radio.openReadingPipe(1,pipes[1]);
    } else {
      radio.openWritingPipe(pipes[1]);
      radio.openReadingPipe(1,pipes[0]);
      radio.startListening();

    }

	// forever loop
	while (1)
	{
		if (role == role_ping_out)
		{
			// First, stop listening so we can talk.
			radio.stopListening();

			// Take the time, and send it.  This will block until complete

			printf("Now sending...\n");
			unsigned long time = millis();

			bool ok = radio.write( &time, sizeof(unsigned long) );

			if (!ok){
				printf("failed.\n");
			}
			// Now, continue listening
			radio.startListening();

			// Wait here until we get a response, or timeout (250ms)
			unsigned long started_waiting_at = millis();
			bool timeout = false;
			while ( ! radio.available() && ! timeout ) {
					// by bcatalin » Thu Feb 14, 2013 11:26 am
					//delay(5); //add a small delay to let radio.available to check payload
				if (millis() - started_waiting_at > 200 )
					timeout = true;
			}


			// Describe the results
			if ( timeout )
			{
				printf("Failed, response timed out.\n");
			}
			else
			{
				// Grab the response, compare, and send to debugging spew
				unsigned long got_time;
				radio.read( &got_time, sizeof(unsigned long) );

				// Spew it
				printf("Got response %lu, round-trip delay: %lu\n",got_time,millis()-got_time);
			}

			// Try again 1s later
			//    delay(1000);
			sleep(1);

		}

		//
		// Pong back role.  Receive each packet, dump it out, and send it back
		//

		if ( role == role_pong_back )
		{
			// if there is data ready
			//printf("Check available...\n");
			//delay(3);
			if ( radio.available() )
			{
				// Dump the payloads until we've gotten everything
				unsigned long got_time;


				// Fetch the payload, and see if this was the last one.
				radio.read( &got_time, sizeof(unsigned long) );

				radio.stopListening();
				//delay(1);
				// Seem to need a  delay, or the RPi is too quick
				radio.write( &got_time, sizeof(unsigned long) );

				//delay(1);
				// Now, resume listening so we catch the next packets.
				radio.startListening();
				 //delay(1);
				// Spew it
				printf("Got payload(%d) %lu...\n",sizeof(unsigned long), got_time);
			}
		//delay(5);
		}
	} // forever loop

  return 0;
}