Files
MySensors/Bootloader/MyOtaBootloader.c
T
Patrick Fallberg 644eac1712 Signing support implemented in the MySensors library
The dummy signing driver backend is used. But with this commit all
framework logic for managing signed messages in the MySensors
ecosystem is implemented and enables more sophisticated signing
backends to be added later on.

For a sensor (or gateway) that require a gateway to send signed
messages to it, add 'true' as the fifth argument to 'begin'.
The gateway will automatically inform a node of it's signing
requirements as soon as it receivs the nodes signing preference.
It is important to understand that if the gateway require
signing, it will in this implementation only require signing from
nodes that require signing by the gateway.

If the sensor requires signing from another node on the network
which it communicates directly with, it needs to send 'true' in
an internal message of type I_REQUEST_SIGNING.
2015-02-17 23:25:41 +01:00

214 lines
5.9 KiB
C

#include "MyOtaBootloader.h"
int main(void) __attribute__ ((naked)) __attribute__ ((section (".init9")));
volatile char dummy;
EMPTY_INTERRUPT(WDT_vect);
static uint16_t calcCRCrom (const void* ptr, uint16_t len) {
uint16_t crc = ~0;
for (uint16_t i = 0; i < len; ++i)
crc = _crc16_update(crc, pgm_read_byte((uint16_t) ptr + i));
return crc;
}
static uint8_t validFirmware () {
return calcCRCrom(0, fc.blocks * FIRMWARE_BLOCK_SIZE) == fc.crc;
}
static void reboot() {
wdt_enable(WDTO_15MS);
for (;;);
}
static void startup() {
if (validFirmware()) {
wdt_disable();
clock_prescale_set(orgClockDiv);
((void(*)()) 0)();
} else
reboot();
}
static void boot_program_page(uint32_t page, uint8_t *buf) {
uint8_t sreg = SREG;
cli();
eeprom_busy_wait();
boot_page_erase(page);
boot_spm_busy_wait();
for (uint16_t i = 0; i < SPM_PAGESIZE; i += 2) {
uint16_t w = *buf++;
w += (*buf++) << 8;
boot_page_fill(page + i, w);
}
boot_page_write(page);
boot_spm_busy_wait();
boot_rww_enable();
SREG = sreg;
}
static boolean sendWrite(MyMessage message) {
return write(nc.parentNodeId, message.array, HEADER_SIZE + mGetLength(message), (message.destination == BROADCAST_ADDRESS));
}
static uint8_t sendAndWait(uint8_t reqType, uint8_t resType) {
msg.type = reqType;
for (uint8_t i = 0; i < 10; i++) {
sendWrite(msg);
for (uint8_t j = 0; j < 20; j++) {
wdt_reset();
for (uint8_t j = 0; j < 100; j++) {
wdt_reset();
uint8_t pipe;
boolean avail = available(&pipe);
if (avail && pipe<=6) {
read(rmsg.array,pipe);
if(!(mGetVersion(rmsg) == PROTOCOL_VERSION))
continue;
if (rmsg.destination == nc.nodeId) {
if (mGetCommand(rmsg) == C_INTERNAL) {
if (rmsg.type == I_FIND_PARENT_RESPONSE) {
if (rmsg.data[0] < nc.distance - 1) {
nc.distance = rmsg.data[0] + 1;
nc.parentNodeId = rmsg.sender;
eeprom_write_byte((uint8_t*)EEPROM_PARENT_NODE_ID_ADDRESS, nc.parentNodeId);
eeprom_write_byte((uint8_t*)EEPROM_DISTANCE_ADDRESS, nc.distance);
}
}
}
if ((mGetCommand(rmsg) == mGetCommand(msg)) && (rmsg.type == resType))
return 1;
}
}
delaym(1);
}
}
}
return 0;
}
int main () {
asm volatile ("clr __zero_reg__");
// switch to 4 MHz
orgClockDiv = clock_prescale_get();
clock_prescale_set(F_CPU_DIV);
MCUSR = 0;
// enable watchdog to avoid deadlock
wdt_enable(WDTO_8S);
#ifdef LED_DEBUG
// enable LEDs for debugging and blink once as visual "bootloader started" sign
led_init();
blink(LED_MBOTH, 250);
#endif
#ifdef UART_DEBUG
// enable UART for debugging and send start message
uart_init();
uart_puts("Go\n");
#endif
wdt_reset();
// initialize RF module
begin();
wdt_reset();
// Read settings from EEPROM
eeprom_read_block((void*)&nc, (void*)EEPROM_NODE_ID_ADDRESS, sizeof(struct NodeConfig));
wdt_reset();
msg.sender = nc.nodeId;
msg.last = nc.nodeId;
address(nc.nodeId);
msg.sensor = NODE_SENSOR_ID;
mSetLength(msg, 0);
mSetPayloadType(msg, P_STRING);
mSetAck(msg,false);
mSetVersion(msg, PROTOCOL_VERSION);
nc.distance = 255;
mSetCommand(msg, C_INTERNAL);
msg.destination = BROADCAST_ADDRESS;
if (!sendAndWait(I_FIND_PARENT, I_FIND_PARENT_RESPONSE))
// starting existing firmware if no parent responds (if firmware is valid)
// reboot();
startup();
msg.destination = GATEWAY_ADDRESS;
if (nc.nodeId == AUTO) {
openReadingPipe(CURRENT_NODE_PIPE, TO_ADDR(nc.nodeId));
if (!sendAndWait(I_ID_REQUEST, I_ID_RESPONSE))
reboot();
if (mGetPayloadType(rmsg) == P_BYTE)
nc.nodeId = rmsg.data[0];
else if (mGetPayloadType(rmsg) == P_STRING)
nc.nodeId = atoi(rmsg.data);
if (nc.nodeId == AUTO)
reboot();
eeprom_write_byte((uint8_t*)EEPROM_NODE_ID_ADDRESS, nc.nodeId);
msg.sender = nc.nodeId;
msg.last = nc.nodeId;
address(nc.nodeId);
}
// Inform gateway that bootloader does not accept signed messages
msg.type = I_REQUEST_SIGNING;
mSetLength(msg, 1);
msg.data[0] = 0;
sendWrite(msg);
// Read settings from EEPROM
eeprom_read_block((void*)&fc, (void*)EEPROM_FIRMWARE_TYPE_ADDRESS, sizeof(struct FirmwareConfig));
mSetPayloadType(msg,P_CUSTOM);
FirmwareConfigRequest *firmwareConfigRequest = (FirmwareConfigRequest *)msg.data;
mSetLength(msg, sizeof(FirmwareConfigRequest));
mSetCommand(msg, C_STREAM);
firmwareConfigRequest->type = fc.type;
firmwareConfigRequest->version = fc.version;
if (!sendAndWait(ST_FIRMWARE_CONFIG_REQUEST, ST_FIRMWARE_CONFIG_RESPONSE))
// starting existing firmware if no firmware config response (if firmware is valid)
// reboot();
startup();
FirmwareConfigResponse *firmwareConfigResponse = (FirmwareConfigResponse *)rmsg.data;
if (firmwareConfigResponse->version == fc.version)
if (firmwareConfigResponse->blocks == fc.blocks)
if (firmwareConfigResponse->crc == fc.crc)
if (validFirmware())
startup();
fc.type = firmwareConfigResponse->type;
fc.version = firmwareConfigResponse->version;
fc.blocks = firmwareConfigResponse->blocks;
fc.crc = firmwareConfigResponse->crc;
FirmwareRequest *firmwareRequest = (FirmwareRequest *)msg.data;
mSetLength(msg, sizeof(FirmwareRequest));
firmwareRequest->type = fc.type;
firmwareRequest->version = fc.version;
for (uint16_t block = 0; block < fc.blocks; block++) {
firmwareRequest->block = block;
if (!sendAndWait(ST_FIRMWARE_REQUEST, ST_FIRMWARE_RESPONSE))
reboot();
FirmwareResponse *firmwareResponse = (FirmwareResponse *)rmsg.data;
uint8_t offset = (block * FIRMWARE_BLOCK_SIZE) % SPM_PAGESIZE;
memcpy(progBuf + offset, firmwareResponse->data, FIRMWARE_BLOCK_SIZE);
if (offset == SPM_PAGESIZE - FIRMWARE_BLOCK_SIZE)
boot_program_page((block * FIRMWARE_BLOCK_SIZE) - offset, progBuf);
}
wdt_reset();
if (validFirmware()) {
eeprom_write_block((void*)&fc, (void*)EEPROM_FIRMWARE_TYPE_ADDRESS, sizeof(struct FirmwareConfig));
#ifdef UART_DEBUG
uart_puts("fw ok\n");
} else {
uart_puts("fw nok\n");
#endif
}
reboot();
}