* add delay if interface not found
* adjust initialization behavior
* pushed for debugging reasons for concerned parties
* comment out simple recenter
* remove old style motion, some minor optimizations
* optimize default case check
* optimized default condition
* change manifest install behavior to trigger on desktop mode as well
* add desktop mode binding launch
* add tracker overlay option to utils
* commit to check status
* attempt to fix native LH issues with chaperone when exiting
* add desktop mode toggle and some cleanup
* remove adjust chaperone
* remove clang format from ci, increment version, cleanup
* update circle ci
* fix conversion warning
* add F13-19 to keyboard parser
* add additional logging around failure to initialize
* add unsaved changes
* update version 5.8.1
* fix some collisions in enum declaration
* add controller powers on steamvr, and no HMD to steamvr tab, increment version
* slightly alter drag movement, fix qml issue
* code cleanup
* fix logspam/attempt to delete non existant overlays
* increment version 5.8.3
* add zero-offset to true as potential edge case fix
* remove dead code in qml
* fix both brightness sliders to be uniform .05 minimum via set, and .2 minimum via slider
* attempt to fix recenter, and fix floor
* further space drag/recenter improvements
* get rid of old code
* increment version 5.8.6
* remove old commented code settings page
* update documentation
* re-add mistakenly removed line
* attempt at fixing reset etc. etc.
* incrment verison
* fix brightness slider min at 3 or 20 depending if slide or direct input add error recovery from bad cal state on recenter and reset offsets
* update version 5.8.8
* fix room-setup bug on startup if using auto apply chaperone
* incrmenet version 5.8.9
* add delay if interface not found
* adjust initialization behavior
* pushed for debugging reasons for concerned parties
* comment out simple recenter
* remove old style motion, some minor optimizations
* optimize default case check
* optimized default condition
* change manifest install behavior to trigger on desktop mode as well
* add desktop mode binding launch
* add tracker overlay option to utils
* commit to check status
* attempt to fix native LH issues with chaperone when exiting
* add desktop mode toggle and some cleanup
* remove adjust chaperone
* remove clang format from ci, increment version, cleanup
* update circle ci
* fix conversion warning
* add F13-19 to keyboard parser
* add additional logging around failure to initialize
* add unsaved changes
* update version 5.8.1
* fix some collisions in enum declaration
* add controller powers on steamvr, and no HMD to steamvr tab, increment version
* slightly alter drag movement, fix qml issue
* code cleanup
* fix logspam/attempt to delete non existant overlays
* increment version 5.8.3
* add zero-offset to true as potential edge case fix
* remove dead code in qml
* fix both brightness sliders to be uniform .05 minimum via set, and .2 minimum via slider
* attempt to fix recenter, and fix floor
* further space drag/recenter improvements
* get rid of old code
* increment version 5.8.6
* remove old commented code settings page
* update documentation
* re-add mistakenly removed line
* attempt at fixing reset etc. etc.
* incrment verison
* fix brightness slider min at 3 or 20 depending if slide or direct input add error recovery from bad cal state on recenter and reset offsets
* update version 5.8.8
* fix room-setup bug on startup if using auto apply chaperone
* incrmenet version 5.8.9
* add delay if interface not found
* adjust initialization behavior
* pushed for debugging reasons for concerned parties
* comment out simple recenter
* remove old style motion, some minor optimizations
* optimize default case check
* optimized default condition
* change manifest install behavior to trigger on desktop mode as well
* add desktop mode binding launch
* add tracker overlay option to utils
* commit to check status
* attempt to fix native LH issues with chaperone when exiting
* add desktop mode toggle and some cleanup
* remove adjust chaperone
* remove clang format from ci, increment version, cleanup
* update circle ci
* fix conversion warning
* add F13-19 to keyboard parser
* add additional logging around failure to initialize
* add unsaved changes
* update version 5.8.1
* fix some collisions in enum declaration
* add controller powers on steamvr, and no HMD to steamvr tab, increment version
* slightly alter drag movement, fix qml issue
* code cleanup
* fix logspam/attempt to delete non existant overlays
* increment version 5.8.3
* add zero-offset to true as potential edge case fix
* remove dead code in qml
* fix both brightness sliders to be uniform .05 minimum via set, and .2 minimum via slider
* attempt to fix recenter, and fix floor
* further space drag/recenter improvements
* get rid of old code
* increment version 5.8.6
* remove old commented code settings page
* update documentation
* re-add mistakenly removed line
* add delay if interface not found
* adjust initialization behavior
* pushed for debugging reasons for concerned parties
* comment out simple recenter
* remove old style motion, some minor optimizations
* optimize default case check
* optimized default condition
* change manifest install behavior to trigger on desktop mode as well
* add desktop mode binding launch
* add tracker overlay option to utils
* commit to check status
* attempt to fix native LH issues with chaperone when exiting
* add desktop mode toggle and some cleanup
* remove adjust chaperone
* remove clang format from ci, increment version, cleanup
* update circle ci
* fix conversion warning
* add F13-19 to keyboard parser
* add additional logging around failure to initialize
* add unsaved changes
* update version 5.8.1
* fix some collisions in enum declaration
* add controller powers on steamvr, and no HMD to steamvr tab, increment version
* slightly alter drag movement, fix qml issue
* code cleanup
* fix logspam/attempt to delete non existant overlays
* increment version 5.8.3
* update openvr 1.26.7
* ignore chaperone play area error, as it should not effect chaperone, and it frequently occurs with some meta to pcvr configurations
* replace old seated origin call with new reset zero pose call
* change zero offsets to new command
* adjust camera settings to new version of openvr 1.27
* fix save error
* increment version 5.7.4
* Option to fade out chaperone when HMD goes below a configured height
Useful for setups in which you have a seat just outside your VR space,
or like to sit in the middle of your space for any amount of time. Will
fade out the boundaries to 0% opacity over 5 seconds, 5 seconds after
you sit down. Standing back up to the configured height will make them
pop back in immediately.
Can be found under Chaperone -> Additional Settings.
* Update format.sh to require clang-format v10
* Use fade distance instead of opacity, opacity inconsistently applied
* Bugfixes (#624)
* stop crashing on HMD Init Errors, as well as bypass force quit on all steamvr Init Errors
* add qtc clang to gitignore
* add app volume adjustment
* adjust app volume placement in menu
* fix type error
* Revert 1.26.3 chaperone adjust changes
* fix setting bug increment version
---------
Co-authored-by: Chelsea Jaggi <feilen1000@gmail.com>
* fix chaperone move behavior for 1.26.x of open/steamvr fix a ui error with a warning on old app and external chaperone
---------
Co-authored-by: Chelsea Jaggi <feilen1000@gmail.com>
* Option to fade out chaperone when HMD goes below a configured height
Useful for setups in which you have a seat just outside your VR space,
or like to sit in the middle of your space for any amount of time. Will
fade out the boundaries to 0% opacity over 5 seconds, 5 seconds after
you sit down. Standing back up to the configured height will make them
pop back in immediately.
Can be found under Chaperone -> Additional Settings.
* Update format.sh to require clang-format v10
* Use fade distance instead of opacity, opacity inconsistently applied
* Bugfixes (#624)
* stop crashing on HMD Init Errors, as well as bypass force quit on all steamvr Init Errors
* add qtc clang to gitignore
* add app volume adjustment
* adjust app volume placement in menu
* fix type error
* update version string, prevent us from exiting when interface reported bad
---------
Co-authored-by: Chelsea Jaggi <feilen1000@gmail.com>
* Option to fade out chaperone when HMD goes below a configured height
Useful for setups in which you have a seat just outside your VR space,
or like to sit in the middle of your space for any amount of time. Will
fade out the boundaries to 0% opacity over 5 seconds, 5 seconds after
you sit down. Standing back up to the configured height will make them
pop back in immediately.
Can be found under Chaperone -> Additional Settings.
* Update format.sh to require clang-format v10
* Use fade distance instead of opacity, opacity inconsistently applied
* Bugfixes (#624)
* stop crashing on HMD Init Errors, as well as bypass force quit on all steamvr Init Errors
* add qtc clang to gitignore
* add app volume adjustment
* adjust app volume placement in menu
* fix type error
* increment version
* fix version number
---------
Co-authored-by: ykeara <ykeara1@gmail.com>
* add nlhomann json header
* add get scene app fn
* add get current binding and related logic
* add save binding file to settings folder
* apply binding fn added fixed uid bug
* add button logic to QML, add enable Bind Setting
* add finding logic for all custom bind
* fix minor qml issues
* fix get controllername bug, fix bug with save bind
* fix regex issue
* change webrequest for selectconfig
* change to properly urlify path to send
* fix race condition web requests
* change steamvr tab qml formatting
* change color scheme
* change colors of icons to text color
* change bind qml better for better ux
* add possible workaround for space drag issues
* add deact color to pushbutton
* increment version
* adjust button size in movecenter
* move nlhomann json
* fix PKGBUILD to include missing dependency (#606) (#613)
It turns out qt5-websockets needs to be included for a successful build.
Co-authored-by: James R <71466513+ColdIce1605@users.noreply.github.com>
* fix warning
* improved logging messages around perapp bindings
* improve getsceneappID logging
* add HMD based controller Finding
* improve logging controller name
* change logging around initial chaperone calibration
* increment version
* improve logging/error handling around sceneappid failures
* added fallback for getting scene app by pid
* update version string
* update documentation
Co-authored-by: James R <71466513+ColdIce1605@users.noreply.github.com>
* add Select Dongle Pairing, fix clipping on long SN names (quest)
* remove test log, add ws log, add pair protection non steamvr
* add missing install commands for new qt modules
* remove bad package
* add auto apply chaperone option, remove old seated/uncal/openxr fixes in favor of always on
* adjust battery overlay for tundras
* fix tundra tracker bat indicator positioning, remove offset page restrictions from non-standing universe, make pairing more responsive and display brief instructions
* add Drag Multiplier
* update documentation
* change version to release
* update readme
* fix format issues readme
* update readme with setting description
* change uid to prevent collision
* changed rounding for grav fling to 2 decimals to be consistand with other values on drag page
* Revert "Add dedicated image for CircleCI builds"
This reverts commit 44a5d3eed0.
With how little we use the Docker hub features it does not make sense to
have external dependencies on it.
* Add `qt512websockets` to CI build
This is necessary for Ykeara's feature branch.
This change includes a fix for changes in naming for an option called "Disable Automatic Crash Recovery of Chaperone Config" that was changed in the application to "Enable..." likely due to OVRAS updates.
Missing options were added with a TBA placeholder for the details. I do not know the technical details of these options, and therefore advise to replace the TBA with something before merging to main.
* Crash Recovery Defaults to Off, add option to use space drag w/ uncalibrated playspace
* increment version 5.3.3
* Feat/apply offsets binding (#576)
* add apply offsets steamvr input
* add new binding to Readme
Co-authored-by: TheMrGong <gongora656@gmail.com>
* increment version 5.4.0
* added LH Console Interface class, WIP TX/RX list via lh console
* switch over to property based dongle information
* add ovr system wrapper
* add use of parameter to avoid warning as error
* openXR fix, and Change Display State of Chaperone Disabled
* update text
* format files
* clang 9.0.0 format
* add documentation update
* remove windows header include
* remove filesystem header
* fix uncal motion switching issue
Co-authored-by: TheMrGong <gongora656@gmail.com>
This is a slight adjustment to the battery overlay position to prevent clipping with the new Vive Tracker 3.0 higher face and closer prongs. These changes shouldn't degrade functionality on other trackers.
Compiling C++ on various different platforms with as many out of tree
dependencies as we have is volatile at best.
In order to prevent a third party warning from ruining the build for
people who don't care about third party warnings, we remove
warnings-as-errors by default.
They are still enabled by default on CI.
This essentially just bakes in all the dependencies and other third
party tools that we need, preventing them from being downloaded on every
new CI run.
TravisCI does not have non-enterprise support for custom images without
a lot of hassle.
* fixed input sending bug not properly releasing keys
* updated to ovr 1.12.5
* added disable oculus api button experimental
* small refactor and fix float and bool bugs
* added nokeyup events to modifier keys when read in, and adjusted token send to have proper logic
* fixed literal held issue
* added backslash
* fixed sender token parser
* updated version string to dev whoops
* added backslash to documentation for keyboard input
* Implement (most of) pop-up notification when autoturn is enabled
* Add neato fading: doesn't appear to impact performance
* formatting
* added macro and UI for notification of auto-turn
* changed notification default to true for auto-turn
* added common issue for trackers
* added warning for custom keys
* minor documentation markdown format fixes
* fix qml syntax error in atgb
* gasd
Co-authored-by: ykeara <ykeara1@gmail.com>
* temporarily disabled adjust chaperone
* added experimental check to prevent rotation drift
* adjusted ss to 2 digits precision
* updated rotation model to be based on relative position and not drift
* fixed force precision error with supersampling
* added Error for turning too fast
* removed error impossible to execute
* fixed and cleaned up some potential failure points
* added inversion check
* re-worded warning
* added adjustchaperone2 defaulted to off to replace adjust chaperone
* moved adjust chaperone to settings removed from offsets tab
* moved adjust chaperone to settings removed from offsets tab
* enabled clipping for settings page no longer scrolls outside of its area
* updated strings for release
Previous way of controlling when controllers were run was split among
the different controllers, meaning that third parties would require
knowledge of internal state of controllers in order to be on the same
update schedule as them.
This refactor moves the logic into a seperate class.
Additionally, it also stops the use of the `adjustUpdateRate` function
on all tab controllers, since it broke the prime-number-ability of
less collisions.
* fixed input sending bug not properly releasing keys
* updated to ovr 1.12.5
* added disable oculus api button experimental
* small refactor and fix float and bool bugs
ykeara
RTUnreal
LakesideMiners
CarbonNotes
Kaleb Luedtke
username223
TheJokingTeen
Kung-vr
Ben Scholzen (DASPRiD)