Merge pull request #211 from ToniA/development
Heatpump / air conditioner library 'HeatpumpIR' merged into MySensors
This commit is contained in:
Henrik Ekblad
@@ -0,0 +1,170 @@
|
||||
#include <CarrierHeatpumpIR.h>
|
||||
|
||||
CarrierHeatpumpIR::CarrierHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "carrier";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"carrier\",\"dn\":\"Carrier\",\"mT\":17,\"xT\":30,\"fs\":6}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
void CarrierHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
(void)swingVCmd;
|
||||
(void)swingHCmd;
|
||||
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte operatingMode = CARRIER_AIRCON1_MODE_HEAT;
|
||||
byte fanSpeed = CARRIER_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
|
||||
if (powerModeCmd == POWER_OFF)
|
||||
{
|
||||
operatingMode = CARRIER_AIRCON1_MODE_OFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = CARRIER_AIRCON1_MODE_AUTO;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = CARRIER_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = CARRIER_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = CARRIER_AIRCON1_MODE_DRY;
|
||||
fanSpeedCmd = FAN_AUTO; // Fan speed is always 'AUTO' in DRY mode
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = CARRIER_AIRCON1_MODE_FAN;
|
||||
temperatureCmd = 22; // Temperature is always 22 in FAN mode
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = CARRIER_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = CARRIER_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = CARRIER_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = CARRIER_AIRCON1_FAN3;
|
||||
break;
|
||||
case FAN_4:
|
||||
fanSpeed = CARRIER_AIRCON1_FAN4;
|
||||
break;
|
||||
case FAN_5:
|
||||
fanSpeed = CARRIER_AIRCON1_FAN5;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 16 && temperatureCmd < 31)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
sendCarrier(IR, operatingMode, fanSpeed, temperature);
|
||||
}
|
||||
|
||||
// Send the Carrier code
|
||||
// Carrier has the LSB and MSB in different format than Panasonic
|
||||
|
||||
void CarrierHeatpumpIR::sendCarrier(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature)
|
||||
{
|
||||
byte sendBuffer[9] = { 0x4f, 0xb0, 0xc0, 0x3f, 0x80, 0x00, 0x00, 0x00, 0x00 }; // The data is on the last four bytes
|
||||
|
||||
static const prog_uint8_t temperatures[] PROGMEM = { 0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e, 0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b };
|
||||
byte checksum = 0;
|
||||
|
||||
// PROGMEM arrays cannot be addressed directly, see http://forum.arduino.cc/index.php?topic=106603.0
|
||||
sendBuffer[5] = pgm_read_byte(&(temperatures[(temperature-17)]));
|
||||
|
||||
sendBuffer[6] = operatingMode | fanSpeed;
|
||||
|
||||
// Checksum
|
||||
|
||||
for (int i=0; i<8; i++) {
|
||||
checksum += IR.bitReverse(sendBuffer[i]);
|
||||
}
|
||||
|
||||
// There's something really strange with the checksum calculation...
|
||||
// With these many of the codes matchs with the code from the real Carrier remote
|
||||
// Still certain temperatures do not work with fan speeds 1, 2 or 5
|
||||
|
||||
switch (sendBuffer[6] & 0xF0) {
|
||||
case 0x00: // MODE_AUTO - certain temperature / fan speed combinations do not work
|
||||
checksum += 0x02;
|
||||
switch (sendBuffer[6] & 0x0F) {
|
||||
case 0x02: // FAN1
|
||||
case 0x03: // FAN5
|
||||
case 0x06: // FAN2
|
||||
checksum += 0x80;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case 0x40: // MODE_DRY - all settings should work
|
||||
checksum += 0x02;
|
||||
break;
|
||||
case 0xC0: // MODE_HEAT - certain temperature / fan speed combinations do not work
|
||||
switch (sendBuffer[6] & 0x0F) {
|
||||
case 0x05: // FAN4
|
||||
case 0x06: // FAN2
|
||||
checksum += 0xC0;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case 0x20: // MODE_FAN - all settings should work
|
||||
checksum += 0x02;
|
||||
switch (sendBuffer[6] & 0x0F) {
|
||||
case 0x02: // FAN1
|
||||
case 0x03: // FAN5
|
||||
case 0x06: // FAN2
|
||||
checksum += 0x80;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
sendBuffer[8] = IR.bitReverse(checksum);
|
||||
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
// Header
|
||||
IR.mark(CARRIER_AIRCON1_HDR_MARK);
|
||||
IR.space(CARRIER_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload
|
||||
for (size_t i=0; i<sizeof(sendBuffer); i++) {
|
||||
IR.sendIRByte(sendBuffer[i], CARRIER_AIRCON1_BIT_MARK, CARRIER_AIRCON1_ZERO_SPACE, CARRIER_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Pause + new header
|
||||
IR.mark(CARRIER_AIRCON1_BIT_MARK);
|
||||
IR.space(CARRIER_AIRCON1_MSG_SPACE);
|
||||
|
||||
IR.mark(CARRIER_AIRCON1_HDR_MARK);
|
||||
IR.space(CARRIER_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload again
|
||||
for (size_t i=0; i<sizeof(sendBuffer); i++) {
|
||||
IR.sendIRByte(sendBuffer[i], CARRIER_AIRCON1_BIT_MARK, CARRIER_AIRCON1_ZERO_SPACE, CARRIER_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(CARRIER_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
/*
|
||||
Carrier 42NQV035G / 38NYV035H2 heatpump control (remote control P/N WH-L05SE)
|
||||
*/
|
||||
#ifndef CarrierHeatpumpIR_h
|
||||
#define CarrierHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
// Carrier (42NQV035G / 38NYV035H2) timing constants (remote control P/N WH-L05SE)
|
||||
#define CARRIER_AIRCON1_HDR_MARK 4320
|
||||
#define CARRIER_AIRCON1_HDR_SPACE 4350
|
||||
#define CARRIER_AIRCON1_BIT_MARK 500
|
||||
#define CARRIER_AIRCON1_ONE_SPACE 1650
|
||||
#define CARRIER_AIRCON1_ZERO_SPACE 550
|
||||
#define CARRIER_AIRCON1_MSG_SPACE 7400
|
||||
|
||||
// Carrier codes
|
||||
#define CARRIER_AIRCON1_MODE_AUTO 0x00 // Operating mode
|
||||
#define CARRIER_AIRCON1_MODE_HEAT 0xC0
|
||||
#define CARRIER_AIRCON1_MODE_COOL 0x80
|
||||
#define CARRIER_AIRCON1_MODE_DRY 0x40
|
||||
#define CARRIER_AIRCON1_MODE_FAN 0x20
|
||||
#define CARRIER_AIRCON1_MODE_OFF 0xE0 // Power OFF
|
||||
#define CARRIER_AIRCON1_FAN_AUTO 0x00 // Fan speed
|
||||
#define CARRIER_AIRCON1_FAN1 0x02
|
||||
#define CARRIER_AIRCON1_FAN2 0x06
|
||||
#define CARRIER_AIRCON1_FAN3 0x01
|
||||
#define CARRIER_AIRCON1_FAN4 0x05
|
||||
#define CARRIER_AIRCON1_FAN5 0x03
|
||||
|
||||
|
||||
class CarrierHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
CarrierHeatpumpIR();
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
|
||||
private:
|
||||
void sendCarrier(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature);
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,193 @@
|
||||
#include <FujitsuHeatpumpIR.h>
|
||||
|
||||
FujitsuHeatpumpIR::FujitsuHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "fujitsu_awyz";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"fujitsu_awyz\",\"dn\":\"Fujitsu AWYZ\",\"mT\":16,\"xT\":30,\"fs\":5}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
send(IR, powerModeCmd, operatingModeCmd, fanSpeedCmd, temperatureCmd, swingVCmd, swingHCmd, false);
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd, bool ecoModeCmd)
|
||||
{
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte operatingMode = FUJITSU_AIRCON1_MODE_HEAT;
|
||||
byte fanSpeed = FUJITSU_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
byte swingV = FUJITSU_AIRCON1_VDIR_MANUAL;
|
||||
byte swingH = FUJITSU_AIRCON1_HDIR_MANUAL;
|
||||
byte ecoMode = FUJITSU_AIRCON1_ECO_OFF;
|
||||
|
||||
if (powerModeCmd == POWER_OFF)
|
||||
{
|
||||
operatingMode = FUJITSU_AIRCON1_MODE_OFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = FUJITSU_AIRCON1_MODE_AUTO;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = FUJITSU_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = FUJITSU_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = FUJITSU_AIRCON1_MODE_DRY;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = FUJITSU_AIRCON1_MODE_FAN;
|
||||
// When Fujitsu goes to FAN mode, it sets the low bit of the byte with the temperature. What is the meaning of that?
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = FUJITSU_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = FUJITSU_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = FUJITSU_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = FUJITSU_AIRCON1_FAN3;
|
||||
break;
|
||||
case FAN_4:
|
||||
fanSpeed = FUJITSU_AIRCON1_FAN4;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 15 && temperatureCmd < 31)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
// Only support 'don't move' or 'swing' at the moment, not any specific position
|
||||
if ( swingVCmd == VDIR_SWING) {
|
||||
swingV = FUJITSU_AIRCON1_VDIR_SWING;
|
||||
}
|
||||
|
||||
if ( swingHCmd == HDIR_SWING) {
|
||||
swingH = FUJITSU_AIRCON1_HDIR_SWING;
|
||||
}
|
||||
|
||||
if (ecoModeCmd) {
|
||||
ecoMode = FUJITSU_AIRCON1_ECO_ON;
|
||||
}
|
||||
|
||||
sendFujitsu(IR, operatingMode, fanSpeed, temperature, swingV, swingH, ecoMode);
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::sendFujitsu(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH, byte ecoMode)
|
||||
{
|
||||
// ON, HEAT, AUTO FAN, +24 degrees
|
||||
byte FujitsuTemplate[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0xFE, 0x09, 0x30, 0x80, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00 };
|
||||
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
||||
|
||||
byte OFF_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x02, 0xFD };
|
||||
byte checksum = 0x00;
|
||||
|
||||
/*
|
||||
|
||||
Fujitsu does not have codes to set the air direction to any specific position, but just go to the next position:
|
||||
|
||||
byte nextVerticalPosition_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x6C, 0x93 };
|
||||
byte nextHorizontalPosition_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x79,0x86 };
|
||||
|
||||
These would need to be sent separately...
|
||||
*/
|
||||
// Set the operatingmode on the template message
|
||||
FujitsuTemplate[9] = operatingMode;
|
||||
|
||||
// Set the eco mode on the template message
|
||||
FujitsuTemplate[14] = ecoMode;
|
||||
|
||||
// Set the temperature on the template message. The least significant bit should be set to '1'
|
||||
FujitsuTemplate[8] = (temperature - 16) << 4 | 0x01;
|
||||
|
||||
// Set the fan speed and air direction on the template message
|
||||
FujitsuTemplate[10] = fanSpeed + swingV + swingH;
|
||||
|
||||
// Calculate the checksum
|
||||
for (int i=0; i<15; i++) {
|
||||
checksum += FujitsuTemplate[i];
|
||||
}
|
||||
|
||||
FujitsuTemplate[15] = (byte)(0x9E - checksum);
|
||||
|
||||
if (operatingMode == FUJITSU_AIRCON1_MODE_OFF) {
|
||||
// OFF
|
||||
sendFujitsuMsg(IR, sizeof(OFF_msg), OFF_msg);
|
||||
} else {
|
||||
sendFujitsuMsg(IR, sizeof(FujitsuTemplate), FujitsuTemplate);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::sendFujitsuHiPower(IRSender& IR)
|
||||
{
|
||||
byte HiPower_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x39, 0xC6 };
|
||||
|
||||
sendFujitsuMsg(IR, sizeof(HiPower_msg), HiPower_msg);
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::sendFujitsuFilterClean(IRSender& IR)
|
||||
{
|
||||
byte FilterClean_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x02, 0xFD };
|
||||
|
||||
sendFujitsuMsg(IR, sizeof(FilterClean_msg), FilterClean_msg);
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::sendFujitsuSuperQuiet(IRSender& IR)
|
||||
{
|
||||
byte SuperQuiet_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x02, 0xFD };
|
||||
|
||||
sendFujitsuMsg(IR, sizeof(SuperQuiet_msg), SuperQuiet_msg);
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::sendFujitsuTestRun(IRSender& IR)
|
||||
{
|
||||
byte TestRun_msg[] = { 0x14, 0x63, 0x00, 0x10, 0x10, 0x02, 0xFD };
|
||||
|
||||
sendFujitsuMsg(IR, sizeof(TestRun_msg), TestRun_msg);
|
||||
}
|
||||
|
||||
|
||||
void FujitsuHeatpumpIR::sendFujitsuMsg(IRSender& IR, byte msgSize, byte *msg)
|
||||
{
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
// Header
|
||||
IR.mark(FUJITSU_AIRCON1_HDR_MARK);
|
||||
IR.space(FUJITSU_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Data
|
||||
for (byte i=0; i<msgSize; i++) {
|
||||
IR.sendIRByte(msg[i], FUJITSU_AIRCON1_BIT_MARK, FUJITSU_AIRCON1_ZERO_SPACE, FUJITSU_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(FUJITSU_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,54 @@
|
||||
/*
|
||||
Fujitsu Nocria (AWYZ14) heatpump control (remote control P/N AR-PZ2)
|
||||
*/
|
||||
#ifndef FujitsuHeatpumpIR_h
|
||||
#define FujitsuHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
|
||||
// Fujitsu Nocria (AWYZ14) timing constants (remote control P/N AR-PZ2)
|
||||
#define FUJITSU_AIRCON1_HDR_MARK 3210
|
||||
#define FUJITSU_AIRCON1_HDR_SPACE 1680
|
||||
#define FUJITSU_AIRCON1_BIT_MARK 410
|
||||
#define FUJITSU_AIRCON1_ONE_SPACE 1230
|
||||
#define FUJITSU_AIRCON1_ZERO_SPACE 440
|
||||
|
||||
// Fujitsu codes
|
||||
#define FUJITSU_AIRCON1_MODE_AUTO 0x00 // Operating mode
|
||||
#define FUJITSU_AIRCON1_MODE_HEAT 0x04
|
||||
#define FUJITSU_AIRCON1_MODE_COOL 0x01
|
||||
#define FUJITSU_AIRCON1_MODE_DRY 0x02
|
||||
#define FUJITSU_AIRCON1_MODE_FAN 0x03
|
||||
#define FUJITSU_AIRCON1_MODE_OFF 0xFF // Power OFF - not real codes, but we need something...
|
||||
#define FUJITSU_AIRCON1_FAN_AUTO 0x00 // Fan speed
|
||||
#define FUJITSU_AIRCON1_FAN1 0x04
|
||||
#define FUJITSU_AIRCON1_FAN2 0x03
|
||||
#define FUJITSU_AIRCON1_FAN3 0x02
|
||||
#define FUJITSU_AIRCON1_FAN4 0x01
|
||||
#define FUJITSU_AIRCON1_VDIR_MANUAL 0x00 // Air direction modes
|
||||
#define FUJITSU_AIRCON1_VDIR_SWING 0x10
|
||||
#define FUJITSU_AIRCON1_HDIR_MANUAL 0x00
|
||||
#define FUJITSU_AIRCON1_HDIR_SWING 0x20
|
||||
#define FUJITSU_AIRCON1_ECO_OFF 0x20
|
||||
#define FUJITSU_AIRCON1_ECO_ON 0x00
|
||||
|
||||
|
||||
|
||||
class FujitsuHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
FujitsuHeatpumpIR();
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd, bool ecoModeCmd);
|
||||
void sendFujitsuHiPower(IRSender& IR);
|
||||
void sendFujitsuFilterClean(IRSender& IR);
|
||||
void sendFujitsuSuperQuiet(IRSender& IR);
|
||||
void sendFujitsuTestRun(IRSender& IR);
|
||||
|
||||
private:
|
||||
void sendFujitsu(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH, byte ecoMode);
|
||||
void sendFujitsuMsg(IRSender& IR, byte msgSize, byte *msg);
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,21 @@
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
HeatpumpIR::HeatpumpIR()
|
||||
{
|
||||
}
|
||||
|
||||
// This is a virtual function, i.e. never called
|
||||
void HeatpumpIR::send(IRSender&, byte, byte, byte, byte, byte, byte)
|
||||
{
|
||||
}
|
||||
|
||||
// Heatpump model and info getters
|
||||
const char PROGMEM* HeatpumpIR::model()
|
||||
{
|
||||
return _model;
|
||||
}
|
||||
|
||||
const char PROGMEM* HeatpumpIR::info()
|
||||
{
|
||||
return _info;
|
||||
}
|
||||
@@ -0,0 +1,69 @@
|
||||
/*
|
||||
The generic heatpump interface
|
||||
* Constants for modes
|
||||
* The constructor and the 'send' command interface
|
||||
*/
|
||||
|
||||
#ifndef HeatpumpIR_h
|
||||
#define HeatpumpIR_h
|
||||
|
||||
#define __PROG_TYPES_COMPAT__
|
||||
#include <Arduino.h>
|
||||
#include <IRSender.h>
|
||||
|
||||
|
||||
// Power state
|
||||
#define POWER_OFF 0
|
||||
#define POWER_ON 1
|
||||
|
||||
// Operating modes
|
||||
#define MODE_AUTO 1
|
||||
#define MODE_HEAT 2
|
||||
#define MODE_COOL 3
|
||||
#define MODE_DRY 4
|
||||
#define MODE_FAN 5
|
||||
#define MODE_MAINT 6
|
||||
|
||||
// Fan speeds. Note that some heatpumps have less than 5 fan speeds
|
||||
#define FAN_AUTO 0
|
||||
#define FAN_1 1
|
||||
#define FAN_2 2
|
||||
#define FAN_3 3
|
||||
#define FAN_4 4
|
||||
#define FAN_5 5
|
||||
|
||||
// Vertical air directions. Note that these cannot be set on all heat pumps
|
||||
#define VDIR_AUTO 0
|
||||
#define VDIR_MANUAL 0
|
||||
#define VDIR_SWING 1
|
||||
#define VDIR_UP 2
|
||||
#define VDIR_MUP 3
|
||||
#define VDIR_MIDDLE 4
|
||||
#define VDIR_MDOWN 5
|
||||
#define VDIR_DOWN 6
|
||||
|
||||
// Horizontal air directions. Note that these cannot be set on all heat pumps
|
||||
#define HDIR_AUTO 0
|
||||
#define HDIR_MANUAL 0
|
||||
#define HDIR_SWING 1
|
||||
#define HDIR_MIDDLE 2
|
||||
#define HDIR_LEFT 3
|
||||
#define HDIR_MLEFT 4
|
||||
#define HDIR_MRIGHT 5
|
||||
#define HDIR_RIGHT 6
|
||||
|
||||
|
||||
class HeatpumpIR
|
||||
{
|
||||
protected:
|
||||
HeatpumpIR(); // Cannot create generic heatpump instances
|
||||
const char * _model;
|
||||
const char * _info;
|
||||
|
||||
public:
|
||||
virtual void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
const char PROGMEM* model();
|
||||
const char PROGMEM* info();
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,129 @@
|
||||
#include <HisenseHeatpumpIR.h>
|
||||
|
||||
HisenseHeatpumpIR::HisenseHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "hisense_aud";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"hisense_aud\",\"dn\":\"Hisense AUD\",\"mT\":18,\"xT\":32,\"fs\":3}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
void HisenseHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd , byte fanSpeedCmd , byte temperatureCmd , byte swingVCmd , byte swingHCmd )
|
||||
{
|
||||
(void)swingVCmd;
|
||||
(void)swingHCmd;
|
||||
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte powerMode = HISENSE_AIRCON1_POWER_ON;
|
||||
byte operatingMode = HISENSE_AIRCON1_MODE_HEAT;
|
||||
byte fanSpeed = HISENSE_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 21;
|
||||
byte swingV=0;
|
||||
byte swingH=0;
|
||||
|
||||
if (powerModeCmd == POWER_OFF)
|
||||
{
|
||||
powerMode = HISENSE_AIRCON1_POWER_OFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = HISENSE_AIRCON1_MODE_AUTO;
|
||||
fanSpeedCmd = FAN_AUTO; // Fan speed is always 'AUTO' in AUTO mode
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = HISENSE_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = HISENSE_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = HISENSE_AIRCON1_MODE_DRY;
|
||||
fanSpeedCmd = FAN_AUTO; // Fan speed is always 'AUTO' in DRY mode
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = HISENSE_AIRCON1_MODE_FAN;
|
||||
if ( fanSpeedCmd == FAN_AUTO ) {
|
||||
fanSpeedCmd = FAN_1; // Fan speed cannot be 'AUTO' in FAN mode
|
||||
temperatureCmd = 25; // Fixed temperature FAN mode
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = HISENSE_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = HISENSE_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = HISENSE_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = HISENSE_AIRCON1_FAN3;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 17 && temperatureCmd < 33)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
|
||||
sendHisense(IR, powerMode, operatingMode, fanSpeed, temperature, swingV, swingH);
|
||||
}
|
||||
|
||||
// Send the Hisense code
|
||||
void HisenseHeatpumpIR::sendHisense(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingV ,byte swingH)
|
||||
{
|
||||
(void)swingV;
|
||||
(void)swingH;
|
||||
|
||||
byte HisenseTemplate[] = { 0x87, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, // Header byte 0-1
|
||||
0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00 }; //
|
||||
|
||||
byte i;
|
||||
|
||||
// Set the Fan speed, On/Off.
|
||||
HisenseTemplate[2] = fanSpeed | powerMode;
|
||||
HisenseTemplate[3] = (((temperature - 18) << 4) | operatingMode ) ;
|
||||
|
||||
// Calculate the byte checksum EXOR byte 2 to 12
|
||||
HisenseTemplate[13] = HisenseTemplate[2];
|
||||
for (i=3; i<13; i++) {
|
||||
HisenseTemplate[13]= HisenseTemplate[i] ^ HisenseTemplate[13];
|
||||
}
|
||||
|
||||
// 38 kHz PWM frequency
|
||||
IR.setFrequency(38);
|
||||
|
||||
// Send Header mark
|
||||
IR.mark(HISENSE_AIRCON1_HDR_MARK);
|
||||
IR.space(HISENSE_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload header part
|
||||
for (i=0; i<7; i++) {
|
||||
IR.sendIRByte(HisenseTemplate[i], HISENSE_AIRCON1_BIT_MARK, HISENSE_AIRCON1_ZERO_SPACE, HISENSE_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Mesage space
|
||||
IR.mark(HISENSE_AIRCON1_BIT_MARK);
|
||||
IR.space(HISENSE_AIRCON1_MSG_SPACE);
|
||||
|
||||
// Payload message part
|
||||
for (; i<14; i++) {
|
||||
IR.sendIRByte(HisenseTemplate[i], HISENSE_AIRCON1_BIT_MARK, HISENSE_AIRCON1_ZERO_SPACE, HISENSE_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(HISENSE_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
/*
|
||||
Hisense AQV12PSBN / AQV09ASA heatpump control (remote control P/N zzz)
|
||||
*/
|
||||
#ifndef HisenseHeatpumpIR_h
|
||||
#define HisenseHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
|
||||
// Hisense timing constants
|
||||
#define HISENSE_AIRCON1_HDR_MARK 9060
|
||||
#define HISENSE_AIRCON1_HDR_SPACE 4550
|
||||
#define HISENSE_AIRCON1_BIT_MARK 520
|
||||
#define HISENSE_AIRCON1_ONE_SPACE 1700
|
||||
#define HISENSE_AIRCON1_ZERO_SPACE 630
|
||||
#define HISENSE_AIRCON1_MSG_SPACE 8140
|
||||
|
||||
// Power state
|
||||
#define HISENSE_AIRCON1_POWER_OFF 0x04 //**
|
||||
#define HISENSE_AIRCON1_POWER_ON 0x00 //**
|
||||
|
||||
// Operating modes
|
||||
// Hisense codes
|
||||
#define HISENSE_AIRCON1_MODE_AUTO 0x04 // Not available 0x00
|
||||
#define HISENSE_AIRCON1_MODE_HEAT 0x00
|
||||
#define HISENSE_AIRCON1_MODE_COOL 0x02
|
||||
#define HISENSE_AIRCON1_MODE_DRY 0x03
|
||||
#define HISENSE_AIRCON1_MODE_FAN 0x04
|
||||
#define HISENSE_AIRCON1_MODE_MAINT 0x04 // Power OFF
|
||||
|
||||
// Fan speeds. Note that some heatpumps have less than 5 fan speeds
|
||||
|
||||
#define HISENSE_AIRCON1_FAN_AUTO 0x00 // Fan speed
|
||||
#define HISENSE_AIRCON1_FAN1 0x03 // * low
|
||||
#define HISENSE_AIRCON1_FAN2 0x02 // * med
|
||||
#define HISENSE_AIRCON1_FAN3 0x01 // * high
|
||||
#define HISENSE_AIRCON1_FAN4 0x01 // * high Not available
|
||||
#define HISENSE_AIRCON1_FAN5 0x01 // * high Not available
|
||||
|
||||
// Not available in this model.
|
||||
// Vertical air directions. Note that these cannot be set on all heat pumps
|
||||
#define HISENSE_VDIR_AUTO 0
|
||||
#define HISENSE_VDIR_MANUAL 0
|
||||
#define HISENSE_VDIR_SWING 0
|
||||
#define HISENSE_VDIR_UP 0
|
||||
#define HISENSE_VDIR_MUP 0
|
||||
#define HISENSE_VDIR_MIDDLE 0
|
||||
#define HISENSE_VDIR_MDOWN 0
|
||||
#define HISENSE_VDIR_DOWN 0
|
||||
|
||||
// Not available in this model.
|
||||
// Horizontal air directions. Note that these cannot be set on all heat pumps
|
||||
#define HISENSE_HDIR_AUTO 0
|
||||
#define HISENSE_HDIR_MANUAL 0
|
||||
#define HISENSE_HDIR_SWING 0
|
||||
#define HISENSE_HDIR_MIDDLE 0
|
||||
#define HISENSE_HDIR_LEFT 0
|
||||
#define HISENSE_HDIR_MLEFT 0
|
||||
#define HISENSE_HDIR_MRIGHT 0
|
||||
#define HISENSE_HDIR_RIGHT 0
|
||||
|
||||
|
||||
class HisenseHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
HisenseHeatpumpIR();
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
|
||||
private:
|
||||
void sendHisense(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH);
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,206 @@
|
||||
#include <Arduino.h>
|
||||
#include <IRSender.h>
|
||||
|
||||
// Heavily based on Ken Shirriff's IRRemote library:
|
||||
// https://github.com/shirriff/Arduino-IRremote
|
||||
//
|
||||
// For PWM on Arduino, see http://playground.arduino.cc/Main/TimerPWMCheatsheet
|
||||
|
||||
IRSender::IRSender(byte pin)
|
||||
{
|
||||
_pin = pin;
|
||||
}
|
||||
|
||||
// Set the PWM frequency. The selected pin determines which timer to use
|
||||
void IRSender::setFrequency(int frequency)
|
||||
{
|
||||
uint8_t pwmval8 = F_CPU / 2000 / (frequency);
|
||||
uint16_t pwmval16 = F_CPU / 2000 / (frequency);
|
||||
|
||||
pinMode(_pin, OUTPUT);
|
||||
digitalWrite(_pin, LOW); // When not sending PWM, we want it low
|
||||
|
||||
switch (_pin)
|
||||
{
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
// Arduino Mega
|
||||
case 9:
|
||||
// Fall-through to 10, timer2 controls both 9 and 10
|
||||
case 10:
|
||||
TCCR2A = _BV(WGM20);
|
||||
TCCR2B = _BV(WGM22) | _BV(CS20);
|
||||
OCR2A = pwmval8;
|
||||
OCR2B = pwmval8 / 3;
|
||||
break;
|
||||
case 11:
|
||||
// Fall-through to 12, timer1 controls both 11 and 12
|
||||
case 12:
|
||||
TCCR1A = _BV(WGM11);
|
||||
TCCR1B = _BV(WGM13) | _BV(CS10);
|
||||
ICR1 = pwmval16;
|
||||
OCR1A = pwmval16 / 3;
|
||||
OCR1B = pwmval16 / 3;
|
||||
break;
|
||||
case 44:
|
||||
// Fall-through to 46, timer 5 controls pins 44, 45 and 46 on Arduino Mega
|
||||
case 45:
|
||||
case 46:
|
||||
TCCR5A = _BV(WGM51) | _BV(WGM50);
|
||||
TCCR5B = _BV(WGM53) | _BV(CS50);
|
||||
ICR5 = pwmval16;
|
||||
OCR5A = pwmval16 / 3;
|
||||
#else
|
||||
// Arduino Duemilanove etc
|
||||
case 3:
|
||||
// Fall-through to 11, timer2 controls both 3 and 11
|
||||
case 11:
|
||||
TCCR2A = _BV(WGM20);
|
||||
TCCR2B = _BV(WGM22) | _BV(CS20);
|
||||
OCR2A = pwmval8;
|
||||
OCR2B = pwmval8 / 3;
|
||||
break;
|
||||
case 9:
|
||||
// Fall-through to 10, timer1 controls both 9 and 10
|
||||
case 10:
|
||||
TCCR1A = _BV(WGM11);
|
||||
TCCR1B = _BV(WGM13) | _BV(CS10);
|
||||
ICR1 = pwmval16;
|
||||
OCR1A = pwmval16 / 3;
|
||||
OCR1B = pwmval16 / 3;
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
// Send a byte (8 bits) over IR
|
||||
void IRSender::sendIRByte(byte sendByte, int bitMarkLength, int zeroSpaceLength, int oneSpaceLength)
|
||||
{
|
||||
for (int i=0; i<8 ; i++)
|
||||
{
|
||||
if (sendByte & 0x01)
|
||||
{
|
||||
mark(bitMarkLength);
|
||||
space(oneSpaceLength);
|
||||
}
|
||||
else
|
||||
{
|
||||
mark(bitMarkLength);
|
||||
space(zeroSpaceLength);
|
||||
}
|
||||
|
||||
sendByte >>= 1;
|
||||
}
|
||||
}
|
||||
|
||||
// The Carrier IR protocol has the bits in a reverse order (compared to the other heatpumps)
|
||||
// See http://www.nrtm.org/index.php/2013/07/25/reverse-bits-in-a-byte/
|
||||
byte IRSender::bitReverse(byte x)
|
||||
{
|
||||
// 01010101 | 10101010
|
||||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
|
||||
// 00110011 | 11001100
|
||||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
|
||||
// 00001111 | 11110000
|
||||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
|
||||
return x;
|
||||
}
|
||||
|
||||
// Send an IR 'mark' symbol, i.e. transmitter ON
|
||||
void IRSender::mark(int markLength)
|
||||
{
|
||||
switch (_pin)
|
||||
{
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
// Arduino Mega
|
||||
case 9:
|
||||
(TCCR2A |= _BV(COM2B1)); // Enable pin 3 PWM output
|
||||
break;
|
||||
case 11:
|
||||
(TCCR1A |= _BV(COM1A1)); // Enable pin 9 PWM output
|
||||
break;
|
||||
case 12:
|
||||
(TCCR1A |= _BV(COM1B1)); // Enable pin 10 PWM output
|
||||
break;
|
||||
case 10:
|
||||
(TCCR2A |= _BV(COM2A1)); // Enable pin 11 PWM output
|
||||
break;
|
||||
case 44:
|
||||
(TCCR5A |= _BV(COM5C1)); // Enable pin 44 PWM output on Arduino Mega
|
||||
break;
|
||||
case 45:
|
||||
(TCCR5A |= _BV(COM5B1)); // Enable pin 45 PWM output on Arduino Mega
|
||||
break;
|
||||
case 46:
|
||||
(TCCR5A |= _BV(COM5A1)); // Enable pin 46 PWM output on Arduino Mega
|
||||
break;
|
||||
#else
|
||||
// Arduino Duemilanove etc
|
||||
case 3:
|
||||
(TCCR2A |= _BV(COM2B1)); // Enable pin 3 PWM output
|
||||
break;
|
||||
case 9:
|
||||
(TCCR1A |= _BV(COM1A1)); // Enable pin 9 PWM output
|
||||
break;
|
||||
case 10:
|
||||
(TCCR1A |= _BV(COM1B1)); // Enable pin 10 PWM output
|
||||
break;
|
||||
case 11:
|
||||
(TCCR2A |= _BV(COM2A1)); // Enable pin 11 PWM output
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
|
||||
delayMicroseconds(markLength);
|
||||
}
|
||||
|
||||
// Send an IR 'space' symbol, i.e. transmitter OFF
|
||||
void IRSender::space(int spaceLength)
|
||||
{
|
||||
switch (_pin)
|
||||
{
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
// Arduino Mega
|
||||
case 9:
|
||||
(TCCR2A &= ~(_BV(COM2B1))); // Disable pin 3 PWM output
|
||||
break;
|
||||
case 11:
|
||||
(TCCR1A &= ~(_BV(COM1A1))); // Disable pin 9 PWM output
|
||||
break;
|
||||
case 12:
|
||||
(TCCR1A &= ~(_BV(COM1B1))); // Disable pin 10 PWM output
|
||||
break;
|
||||
case 10:
|
||||
(TCCR2A &= ~(_BV(COM2A1))); // Disable pin 11 PWM output
|
||||
break;
|
||||
case 44:
|
||||
(TCCR5A &= ~(_BV(COM5C1))); // Disable pin 44 PWM output on Arduino Mega
|
||||
case 45:
|
||||
(TCCR5A &= ~(_BV(COM5B1))); // Disable pin 45 PWM output on Arduino Mega
|
||||
case 46:
|
||||
(TCCR5A &= ~(_BV(COM5A1))); // Disable pin 46 PWM output on Arduino Mega
|
||||
#else
|
||||
// Arduino Duemilanove etc
|
||||
case 3:
|
||||
(TCCR2A &= ~(_BV(COM2B1))); // Disable pin 3 PWM output
|
||||
break;
|
||||
case 9:
|
||||
(TCCR1A &= ~(_BV(COM1A1))); // Disable pin 9 PWM output
|
||||
break;
|
||||
case 10:
|
||||
(TCCR1A &= ~(_BV(COM1B1))); // Disable pin 10 PWM output
|
||||
break;
|
||||
case 11:
|
||||
(TCCR2A &= ~(_BV(COM2A1))); // Disable pin 11 PWM output
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
|
||||
// Mitsubishi heatpump uses > 16383us spaces, and delayMicroseconds only works up to 2^14 - 1 us
|
||||
// Use the less accurate milliseconds delay for longer delays
|
||||
|
||||
if (spaceLength < 16383) {
|
||||
delayMicroseconds(spaceLength);
|
||||
} else {
|
||||
delay(spaceLength/1000);
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
/*
|
||||
Class to send IR signals using the Arduino PWM
|
||||
*/
|
||||
#ifndef IRSender_h
|
||||
#define IRSender_h
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
class IRSender
|
||||
{
|
||||
public:
|
||||
IRSender(byte pin);
|
||||
void setFrequency(int frequency);
|
||||
void sendIRByte(byte sendByte, int bitMarkLength, int zeroSpaceLength, int oneSpaceLength);
|
||||
byte bitReverse(byte x);
|
||||
void space(int spaceLength);
|
||||
void mark(int markLength);
|
||||
|
||||
private:
|
||||
byte _pin;
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,339 @@
|
||||
GNU GENERAL PUBLIC LICENSE
|
||||
Version 2, June 1991
|
||||
|
||||
Copyright (C) 1989, 1991 Free Software Foundation, Inc., <http://fsf.org/>
|
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
Everyone is permitted to copy and distribute verbatim copies
|
||||
of this license document, but changing it is not allowed.
|
||||
|
||||
Preamble
|
||||
|
||||
The licenses for most software are designed to take away your
|
||||
freedom to share and change it. By contrast, the GNU General Public
|
||||
License is intended to guarantee your freedom to share and change free
|
||||
software--to make sure the software is free for all its users. This
|
||||
General Public License applies to most of the Free Software
|
||||
Foundation's software and to any other program whose authors commit to
|
||||
using it. (Some other Free Software Foundation software is covered by
|
||||
the GNU Lesser General Public License instead.) You can apply it to
|
||||
your programs, too.
|
||||
|
||||
When we speak of free software, we are referring to freedom, not
|
||||
price. Our General Public Licenses are designed to make sure that you
|
||||
have the freedom to distribute copies of free software (and charge for
|
||||
this service if you wish), that you receive source code or can get it
|
||||
if you want it, that you can change the software or use pieces of it
|
||||
in new free programs; and that you know you can do these things.
|
||||
|
||||
To protect your rights, we need to make restrictions that forbid
|
||||
anyone to deny you these rights or to ask you to surrender the rights.
|
||||
These restrictions translate to certain responsibilities for you if you
|
||||
distribute copies of the software, or if you modify it.
|
||||
|
||||
For example, if you distribute copies of such a program, whether
|
||||
gratis or for a fee, you must give the recipients all the rights that
|
||||
you have. You must make sure that they, too, receive or can get the
|
||||
source code. And you must show them these terms so they know their
|
||||
rights.
|
||||
|
||||
We protect your rights with two steps: (1) copyright the software, and
|
||||
(2) offer you this license which gives you legal permission to copy,
|
||||
distribute and/or modify the software.
|
||||
|
||||
Also, for each author's protection and ours, we want to make certain
|
||||
that everyone understands that there is no warranty for this free
|
||||
software. If the software is modified by someone else and passed on, we
|
||||
want its recipients to know that what they have is not the original, so
|
||||
that any problems introduced by others will not reflect on the original
|
||||
authors' reputations.
|
||||
|
||||
Finally, any free program is threatened constantly by software
|
||||
patents. We wish to avoid the danger that redistributors of a free
|
||||
program will individually obtain patent licenses, in effect making the
|
||||
program proprietary. To prevent this, we have made it clear that any
|
||||
patent must be licensed for everyone's free use or not licensed at all.
|
||||
|
||||
The precise terms and conditions for copying, distribution and
|
||||
modification follow.
|
||||
|
||||
GNU GENERAL PUBLIC LICENSE
|
||||
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
|
||||
|
||||
0. This License applies to any program or other work which contains
|
||||
a notice placed by the copyright holder saying it may be distributed
|
||||
under the terms of this General Public License. The "Program", below,
|
||||
refers to any such program or work, and a "work based on the Program"
|
||||
means either the Program or any derivative work under copyright law:
|
||||
that is to say, a work containing the Program or a portion of it,
|
||||
either verbatim or with modifications and/or translated into another
|
||||
language. (Hereinafter, translation is included without limitation in
|
||||
the term "modification".) Each licensee is addressed as "you".
|
||||
|
||||
Activities other than copying, distribution and modification are not
|
||||
covered by this License; they are outside its scope. The act of
|
||||
running the Program is not restricted, and the output from the Program
|
||||
is covered only if its contents constitute a work based on the
|
||||
Program (independent of having been made by running the Program).
|
||||
Whether that is true depends on what the Program does.
|
||||
|
||||
1. You may copy and distribute verbatim copies of the Program's
|
||||
source code as you receive it, in any medium, provided that you
|
||||
conspicuously and appropriately publish on each copy an appropriate
|
||||
copyright notice and disclaimer of warranty; keep intact all the
|
||||
notices that refer to this License and to the absence of any warranty;
|
||||
and give any other recipients of the Program a copy of this License
|
||||
along with the Program.
|
||||
|
||||
You may charge a fee for the physical act of transferring a copy, and
|
||||
you may at your option offer warranty protection in exchange for a fee.
|
||||
|
||||
2. You may modify your copy or copies of the Program or any portion
|
||||
of it, thus forming a work based on the Program, and copy and
|
||||
distribute such modifications or work under the terms of Section 1
|
||||
above, provided that you also meet all of these conditions:
|
||||
|
||||
a) You must cause the modified files to carry prominent notices
|
||||
stating that you changed the files and the date of any change.
|
||||
|
||||
b) You must cause any work that you distribute or publish, that in
|
||||
whole or in part contains or is derived from the Program or any
|
||||
part thereof, to be licensed as a whole at no charge to all third
|
||||
parties under the terms of this License.
|
||||
|
||||
c) If the modified program normally reads commands interactively
|
||||
when run, you must cause it, when started running for such
|
||||
interactive use in the most ordinary way, to print or display an
|
||||
announcement including an appropriate copyright notice and a
|
||||
notice that there is no warranty (or else, saying that you provide
|
||||
a warranty) and that users may redistribute the program under
|
||||
these conditions, and telling the user how to view a copy of this
|
||||
License. (Exception: if the Program itself is interactive but
|
||||
does not normally print such an announcement, your work based on
|
||||
the Program is not required to print an announcement.)
|
||||
|
||||
These requirements apply to the modified work as a whole. If
|
||||
identifiable sections of that work are not derived from the Program,
|
||||
and can be reasonably considered independent and separate works in
|
||||
themselves, then this License, and its terms, do not apply to those
|
||||
sections when you distribute them as separate works. But when you
|
||||
distribute the same sections as part of a whole which is a work based
|
||||
on the Program, the distribution of the whole must be on the terms of
|
||||
this License, whose permissions for other licensees extend to the
|
||||
entire whole, and thus to each and every part regardless of who wrote it.
|
||||
|
||||
Thus, it is not the intent of this section to claim rights or contest
|
||||
your rights to work written entirely by you; rather, the intent is to
|
||||
exercise the right to control the distribution of derivative or
|
||||
collective works based on the Program.
|
||||
|
||||
In addition, mere aggregation of another work not based on the Program
|
||||
with the Program (or with a work based on the Program) on a volume of
|
||||
a storage or distribution medium does not bring the other work under
|
||||
the scope of this License.
|
||||
|
||||
3. You may copy and distribute the Program (or a work based on it,
|
||||
under Section 2) in object code or executable form under the terms of
|
||||
Sections 1 and 2 above provided that you also do one of the following:
|
||||
|
||||
a) Accompany it with the complete corresponding machine-readable
|
||||
source code, which must be distributed under the terms of Sections
|
||||
1 and 2 above on a medium customarily used for software interchange; or,
|
||||
|
||||
b) Accompany it with a written offer, valid for at least three
|
||||
years, to give any third party, for a charge no more than your
|
||||
cost of physically performing source distribution, a complete
|
||||
machine-readable copy of the corresponding source code, to be
|
||||
distributed under the terms of Sections 1 and 2 above on a medium
|
||||
customarily used for software interchange; or,
|
||||
|
||||
c) Accompany it with the information you received as to the offer
|
||||
to distribute corresponding source code. (This alternative is
|
||||
allowed only for noncommercial distribution and only if you
|
||||
received the program in object code or executable form with such
|
||||
an offer, in accord with Subsection b above.)
|
||||
|
||||
The source code for a work means the preferred form of the work for
|
||||
making modifications to it. For an executable work, complete source
|
||||
code means all the source code for all modules it contains, plus any
|
||||
associated interface definition files, plus the scripts used to
|
||||
control compilation and installation of the executable. However, as a
|
||||
special exception, the source code distributed need not include
|
||||
anything that is normally distributed (in either source or binary
|
||||
form) with the major components (compiler, kernel, and so on) of the
|
||||
operating system on which the executable runs, unless that component
|
||||
itself accompanies the executable.
|
||||
|
||||
If distribution of executable or object code is made by offering
|
||||
access to copy from a designated place, then offering equivalent
|
||||
access to copy the source code from the same place counts as
|
||||
distribution of the source code, even though third parties are not
|
||||
compelled to copy the source along with the object code.
|
||||
|
||||
4. You may not copy, modify, sublicense, or distribute the Program
|
||||
except as expressly provided under this License. Any attempt
|
||||
otherwise to copy, modify, sublicense or distribute the Program is
|
||||
void, and will automatically terminate your rights under this License.
|
||||
However, parties who have received copies, or rights, from you under
|
||||
this License will not have their licenses terminated so long as such
|
||||
parties remain in full compliance.
|
||||
|
||||
5. You are not required to accept this License, since you have not
|
||||
signed it. However, nothing else grants you permission to modify or
|
||||
distribute the Program or its derivative works. These actions are
|
||||
prohibited by law if you do not accept this License. Therefore, by
|
||||
modifying or distributing the Program (or any work based on the
|
||||
Program), you indicate your acceptance of this License to do so, and
|
||||
all its terms and conditions for copying, distributing or modifying
|
||||
the Program or works based on it.
|
||||
|
||||
6. Each time you redistribute the Program (or any work based on the
|
||||
Program), the recipient automatically receives a license from the
|
||||
original licensor to copy, distribute or modify the Program subject to
|
||||
these terms and conditions. You may not impose any further
|
||||
restrictions on the recipients' exercise of the rights granted herein.
|
||||
You are not responsible for enforcing compliance by third parties to
|
||||
this License.
|
||||
|
||||
7. If, as a consequence of a court judgment or allegation of patent
|
||||
infringement or for any other reason (not limited to patent issues),
|
||||
conditions are imposed on you (whether by court order, agreement or
|
||||
otherwise) that contradict the conditions of this License, they do not
|
||||
excuse you from the conditions of this License. If you cannot
|
||||
distribute so as to satisfy simultaneously your obligations under this
|
||||
License and any other pertinent obligations, then as a consequence you
|
||||
may not distribute the Program at all. For example, if a patent
|
||||
license would not permit royalty-free redistribution of the Program by
|
||||
all those who receive copies directly or indirectly through you, then
|
||||
the only way you could satisfy both it and this License would be to
|
||||
refrain entirely from distribution of the Program.
|
||||
|
||||
If any portion of this section is held invalid or unenforceable under
|
||||
any particular circumstance, the balance of the section is intended to
|
||||
apply and the section as a whole is intended to apply in other
|
||||
circumstances.
|
||||
|
||||
It is not the purpose of this section to induce you to infringe any
|
||||
patents or other property right claims or to contest validity of any
|
||||
such claims; this section has the sole purpose of protecting the
|
||||
integrity of the free software distribution system, which is
|
||||
implemented by public license practices. Many people have made
|
||||
generous contributions to the wide range of software distributed
|
||||
through that system in reliance on consistent application of that
|
||||
system; it is up to the author/donor to decide if he or she is willing
|
||||
to distribute software through any other system and a licensee cannot
|
||||
impose that choice.
|
||||
|
||||
This section is intended to make thoroughly clear what is believed to
|
||||
be a consequence of the rest of this License.
|
||||
|
||||
8. If the distribution and/or use of the Program is restricted in
|
||||
certain countries either by patents or by copyrighted interfaces, the
|
||||
original copyright holder who places the Program under this License
|
||||
may add an explicit geographical distribution limitation excluding
|
||||
those countries, so that distribution is permitted only in or among
|
||||
countries not thus excluded. In such case, this License incorporates
|
||||
the limitation as if written in the body of this License.
|
||||
|
||||
9. The Free Software Foundation may publish revised and/or new versions
|
||||
of the General Public License from time to time. Such new versions will
|
||||
be similar in spirit to the present version, but may differ in detail to
|
||||
address new problems or concerns.
|
||||
|
||||
Each version is given a distinguishing version number. If the Program
|
||||
specifies a version number of this License which applies to it and "any
|
||||
later version", you have the option of following the terms and conditions
|
||||
either of that version or of any later version published by the Free
|
||||
Software Foundation. If the Program does not specify a version number of
|
||||
this License, you may choose any version ever published by the Free Software
|
||||
Foundation.
|
||||
|
||||
10. If you wish to incorporate parts of the Program into other free
|
||||
programs whose distribution conditions are different, write to the author
|
||||
to ask for permission. For software which is copyrighted by the Free
|
||||
Software Foundation, write to the Free Software Foundation; we sometimes
|
||||
make exceptions for this. Our decision will be guided by the two goals
|
||||
of preserving the free status of all derivatives of our free software and
|
||||
of promoting the sharing and reuse of software generally.
|
||||
|
||||
NO WARRANTY
|
||||
|
||||
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
|
||||
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
|
||||
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
|
||||
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||||
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
|
||||
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
|
||||
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
|
||||
REPAIR OR CORRECTION.
|
||||
|
||||
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
|
||||
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
|
||||
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
|
||||
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
|
||||
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
|
||||
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
|
||||
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
|
||||
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGES.
|
||||
|
||||
END OF TERMS AND CONDITIONS
|
||||
|
||||
How to Apply These Terms to Your New Programs
|
||||
|
||||
If you develop a new program, and you want it to be of the greatest
|
||||
possible use to the public, the best way to achieve this is to make it
|
||||
free software which everyone can redistribute and change under these terms.
|
||||
|
||||
To do so, attach the following notices to the program. It is safest
|
||||
to attach them to the start of each source file to most effectively
|
||||
convey the exclusion of warranty; and each file should have at least
|
||||
the "copyright" line and a pointer to where the full notice is found.
|
||||
|
||||
{description}
|
||||
Copyright (C) {year} {fullname}
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License along
|
||||
with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
|
||||
Also add information on how to contact you by electronic and paper mail.
|
||||
|
||||
If the program is interactive, make it output a short notice like this
|
||||
when it starts in an interactive mode:
|
||||
|
||||
Gnomovision version 69, Copyright (C) year name of author
|
||||
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
|
||||
This is free software, and you are welcome to redistribute it
|
||||
under certain conditions; type `show c' for details.
|
||||
|
||||
The hypothetical commands `show w' and `show c' should show the appropriate
|
||||
parts of the General Public License. Of course, the commands you use may
|
||||
be called something other than `show w' and `show c'; they could even be
|
||||
mouse-clicks or menu items--whatever suits your program.
|
||||
|
||||
You should also get your employer (if you work as a programmer) or your
|
||||
school, if any, to sign a "copyright disclaimer" for the program, if
|
||||
necessary. Here is a sample; alter the names:
|
||||
|
||||
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
|
||||
`Gnomovision' (which makes passes at compilers) written by James Hacker.
|
||||
|
||||
{signature of Ty Coon}, 1 April 1989
|
||||
Ty Coon, President of Vice
|
||||
|
||||
This General Public License does not permit incorporating your program into
|
||||
proprietary programs. If your program is a subroutine library, you may
|
||||
consider it more useful to permit linking proprietary applications with the
|
||||
library. If this is what you want to do, use the GNU Lesser General
|
||||
Public License instead of this License.
|
||||
@@ -0,0 +1,150 @@
|
||||
#include <MideaHeatpumpIR.h>
|
||||
|
||||
MideaHeatpumpIR::MideaHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "midea"; // The basic and inverter Midea's are the same, i.e. at least Pro Plus 10FP, Pro Plus 13Fp, Pro Plus 9 Inverter and Pro Plus 12 Inverter should work
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"midea\",\"dn\":\"Ultimate Pro Plus\",\"mT\":16,\"xT\":30,\"fs\":4,\"maint\":[10]}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
void MideaHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
(void)swingVCmd;
|
||||
(void)swingHCmd;
|
||||
|
||||
// Sensible defaults for the heat pump mode
|
||||
byte operatingMode = MIDEA_AIRCON1_MODE_HEAT;
|
||||
byte fanSpeed = MIDEA_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
|
||||
switch (powerModeCmd)
|
||||
{
|
||||
case 0:
|
||||
// OFF is a special case
|
||||
operatingMode = MIDEA_AIRCON1_MODE_OFF;
|
||||
sendMidea(IR, operatingMode, fanSpeed, temperature);
|
||||
return;
|
||||
}
|
||||
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = MIDEA_AIRCON1_MODE_AUTO;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = MIDEA_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = MIDEA_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = MIDEA_AIRCON1_MODE_DRY;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = MIDEA_AIRCON1_MODE_FAN;
|
||||
break;
|
||||
case MODE_MAINT:
|
||||
// Maintenance mode ('FP' on the remote) is a special mode on Midea
|
||||
// Also, this is a switch between 'normal' operation and 'maintenance' operation,
|
||||
// i.e. if already running on maintenance, the heatpump will go back to normal operation
|
||||
operatingMode = MIDEA_AIRCON1_MODE_FP;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = MIDEA_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = MIDEA_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = MIDEA_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = MIDEA_AIRCON1_FAN3;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 16 && temperatureCmd < 31)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
sendMidea(IR, operatingMode, fanSpeed, temperature);
|
||||
}
|
||||
|
||||
// Send the Midea code
|
||||
void MideaHeatpumpIR::sendMidea(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature)
|
||||
{
|
||||
byte sendBuffer[3] = { 0x4D, 0x00, 0x00 }; // First byte is always 0x4D
|
||||
|
||||
static const prog_uint8_t temperatures[] PROGMEM = {0, 8, 12, 4, 6, 14, 10, 2, 3, 11, 9, 1, 5, 13 };
|
||||
|
||||
static const prog_uint8_t OffMsg[] PROGMEM = {0x4D, 0xDE, 0x07 };
|
||||
static const prog_uint8_t FPMsg[] PROGMEM = {0xAD, 0xAF, 0xB5 };
|
||||
|
||||
if (operatingMode == MIDEA_AIRCON1_MODE_OFF)
|
||||
{
|
||||
memcpy_P(sendBuffer, OffMsg, sizeof(sendBuffer));
|
||||
}
|
||||
else if (operatingMode == MIDEA_AIRCON1_MODE_FP)
|
||||
{
|
||||
memcpy_P(sendBuffer, FPMsg, sizeof(sendBuffer));
|
||||
}
|
||||
else
|
||||
{
|
||||
sendBuffer[1] = ~fanSpeed;
|
||||
|
||||
if ( operatingMode == MIDEA_AIRCON1_MODE_FAN )
|
||||
{
|
||||
sendBuffer[2] = MIDEA_AIRCON1_MODE_DRY | 0x07;
|
||||
}
|
||||
else
|
||||
{
|
||||
sendBuffer[2] = operatingMode | pgm_read_byte(&(temperatures[(temperature-17)]));
|
||||
}
|
||||
}
|
||||
|
||||
// Send the code
|
||||
sendMidearaw(IR, sendBuffer);
|
||||
}
|
||||
|
||||
// Send the Midea raw code
|
||||
void MideaHeatpumpIR::sendMidearaw(IRSender& IR, byte sendBuffer[])
|
||||
{
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
// Header
|
||||
IR.mark(MIDEA_AIRCON1_HDR_MARK);
|
||||
IR.space(MIDEA_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Six bytes, every second byte is a bitwise not of the previous byte
|
||||
for (int i=0; i<3; i++) {
|
||||
IR.sendIRByte(sendBuffer[i], MIDEA_AIRCON1_BIT_MARK, MIDEA_AIRCON1_ZERO_SPACE, MIDEA_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(~sendBuffer[i], MIDEA_AIRCON1_BIT_MARK, MIDEA_AIRCON1_ZERO_SPACE, MIDEA_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Pause
|
||||
IR.mark(MIDEA_AIRCON1_BIT_MARK);
|
||||
IR.space(MIDEA_AIRCON1_MSG_SPACE);
|
||||
|
||||
// Header, two last bytes repeated
|
||||
IR.mark(MIDEA_AIRCON1_HDR_MARK);
|
||||
IR.space(MIDEA_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Six bytes, every second byte is a bitwise not of the previous byte
|
||||
for (int i=0; i<3; i++) {
|
||||
IR.sendIRByte(sendBuffer[i], MIDEA_AIRCON1_BIT_MARK, MIDEA_AIRCON1_ZERO_SPACE, MIDEA_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(~sendBuffer[i], MIDEA_AIRCON1_BIT_MARK, MIDEA_AIRCON1_ZERO_SPACE, MIDEA_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(MIDEA_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,47 @@
|
||||
/*
|
||||
Midea MSR1-12HRN1-QC2 + MOA1-12HN1-QC2 heatpump control (remote control P/N RG51M1/E)
|
||||
This heatpump is sold as 'Ultimate Pro Plus 13FP' in Finland, by www.ultimatemarket.com
|
||||
|
||||
Midea MSR1U-12HRDN1-QRC4W + MOB-12HFN1-QRC4W (remote control P/N RG51I20/BGE)
|
||||
This heatpump is sold as 'Ultimate 12 Pro Plus Inverter' in Finland, by www.ultimatemarket.com
|
||||
*/
|
||||
#ifndef MideaHeatpumpIR_h
|
||||
#define MideaHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
// Midea timing constants
|
||||
#define MIDEA_AIRCON1_HDR_MARK 4420
|
||||
#define MIDEA_AIRCON1_HDR_SPACE 4300
|
||||
#define MIDEA_AIRCON1_BIT_MARK 620
|
||||
#define MIDEA_AIRCON1_ONE_SPACE 1560
|
||||
#define MIDEA_AIRCON1_ZERO_SPACE 480
|
||||
#define MIDEA_AIRCON1_MSG_SPACE 5100
|
||||
|
||||
// MIDEA codes
|
||||
#define MIDEA_AIRCON1_MODE_AUTO 0x10 // Operating mode
|
||||
#define MIDEA_AIRCON1_MODE_HEAT 0x30
|
||||
#define MIDEA_AIRCON1_MODE_COOL 0x00
|
||||
#define MIDEA_AIRCON1_MODE_DRY 0x20
|
||||
#define MIDEA_AIRCON1_MODE_FAN 0x60
|
||||
#define MIDEA_AIRCON1_MODE_FP 0x70 // Not a real mode...
|
||||
#define MIDEA_AIRCON1_MODE_OFF 0xFE // Power OFF - not real codes, but we need something...
|
||||
#define MIDEA_AIRCON1_MODE_ON 0xFF // Power ON
|
||||
#define MIDEA_AIRCON1_FAN_AUTO 0x02 // Fan speed
|
||||
#define MIDEA_AIRCON1_FAN1 0x06
|
||||
#define MIDEA_AIRCON1_FAN2 0x05
|
||||
#define MIDEA_AIRCON1_FAN3 0x03
|
||||
|
||||
|
||||
class MideaHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
MideaHeatpumpIR();
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
|
||||
private:
|
||||
void sendMidea(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature);
|
||||
void sendMidearaw(IRSender& IR, byte sendBuffer[]);
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,214 @@
|
||||
#include <MitsubishiHeatpumpIR.h>
|
||||
|
||||
// These are protected methods, i.e. generic Mitsubishi instances cannot be created directly
|
||||
MitsubishiHeatpumpIR::MitsubishiHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
// The different models just set the model accordingly
|
||||
|
||||
MitsubishiFDHeatpumpIR::MitsubishiFDHeatpumpIR() : MitsubishiHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "mitsubishi_fd";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"mitsubishi_fd\",\"dn\":\"Mitsubishi FD\",\"mT\":16,\"xT\":31,\"fs\":5}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
|
||||
_mitsubishiModel = MITSUBISHI_FD;
|
||||
}
|
||||
|
||||
MitsubishiFEHeatpumpIR::MitsubishiFEHeatpumpIR() : MitsubishiHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "mitsubishi_fe";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"mitsubishi_fe\",\"dn\":\"Mitsubishi FE\",\"mT\":16,\"xT\":31,\"fs\":5,\"maint\":[10]}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
|
||||
_mitsubishiModel = MITSUBISHI_FE;
|
||||
}
|
||||
|
||||
|
||||
void MitsubishiHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte powerMode = MITSUBISHI_AIRCON1_MODE_ON;
|
||||
byte operatingMode = MITSUBISHI_AIRCON1_MODE_HEAT;
|
||||
byte fanSpeed = MITSUBISHI_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
byte swingV = MITSUBISHI_AIRCON1_VS_AUTO;
|
||||
byte swingH = MITSUBISHI_AIRCON1_HS_SWING;
|
||||
|
||||
if (powerModeCmd == 0)
|
||||
{
|
||||
powerMode = MITSUBISHI_AIRCON1_MODE_OFF;
|
||||
}
|
||||
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = MITSUBISHI_AIRCON1_MODE_AUTO;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = MITSUBISHI_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = MITSUBISHI_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = MITSUBISHI_AIRCON1_MODE_DRY;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
if (_mitsubishiModel == MITSUBISHI_FE) {
|
||||
operatingMode = MITSUBISHI_AIRCON1_MODE_FAN;
|
||||
temperatureCmd = 24;
|
||||
} else {
|
||||
operatingMode = MITSUBISHI_AIRCON1_MODE_COOL;
|
||||
// Temperature needs to be set to 31 degrees for 'simulated' FAN mode
|
||||
temperatureCmd = 31;
|
||||
}
|
||||
break;
|
||||
case MODE_MAINT: // Maintenance mode is just the heat mode at +10, FAN5
|
||||
if (_mitsubishiModel == MITSUBISHI_FE) {
|
||||
operatingMode |= MITSUBISHI_AIRCON1_MODE_HEAT;
|
||||
temperature = 10; // Default to +10 degrees
|
||||
fanSpeedCmd = FAN_AUTO;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = MITSUBISHI_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = MITSUBISHI_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = MITSUBISHI_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = MITSUBISHI_AIRCON1_FAN3;
|
||||
break;
|
||||
case FAN_4:
|
||||
fanSpeed = MITSUBISHI_AIRCON1_FAN4;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 16 && temperatureCmd < 32)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
switch (swingVCmd)
|
||||
{
|
||||
case VDIR_AUTO:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_AUTO;
|
||||
break;
|
||||
case VDIR_SWING:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_SWING;
|
||||
break;
|
||||
case VDIR_UP:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_UP;
|
||||
break;
|
||||
case VDIR_MUP:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_MUP;
|
||||
break;
|
||||
case VDIR_MIDDLE:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_MIDDLE;
|
||||
break;
|
||||
case VDIR_MDOWN:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_MDOWN;
|
||||
break;
|
||||
case VDIR_DOWN:
|
||||
swingV = MITSUBISHI_AIRCON1_VS_DOWN;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (swingHCmd)
|
||||
{
|
||||
case HDIR_AUTO:
|
||||
case HDIR_SWING:
|
||||
swingH = MITSUBISHI_AIRCON1_HS_SWING;
|
||||
break;
|
||||
case HDIR_MIDDLE:
|
||||
swingH = MITSUBISHI_AIRCON1_HS_MIDDLE;
|
||||
break;
|
||||
case HDIR_LEFT:
|
||||
swingH = MITSUBISHI_AIRCON1_HS_LEFT;
|
||||
break;
|
||||
case HDIR_MLEFT:
|
||||
swingH = MITSUBISHI_AIRCON1_HS_MLEFT;
|
||||
break;
|
||||
case HDIR_RIGHT:
|
||||
swingH = MITSUBISHI_AIRCON1_HS_RIGHT;
|
||||
break;
|
||||
case HDIR_MRIGHT:
|
||||
swingH = MITSUBISHI_AIRCON1_HS_MRIGHT;
|
||||
break;
|
||||
}
|
||||
|
||||
sendMitsubishi(IR, powerMode, operatingMode, fanSpeed, temperature, swingV, swingH);
|
||||
}
|
||||
|
||||
void MitsubishiHeatpumpIR::sendMitsubishi(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH)
|
||||
{
|
||||
byte MitsubishiTemplate[] = { 0x23, 0xCB, 0x26, 0x01, 0x00, 0x20, 0x48, 0x00, 0x00, 0x00, 0x61, 0x00, 0x00, 0x00, 0x10, 0x40, 0x00, 0x00 };
|
||||
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
|
||||
|
||||
byte checksum = 0x00;
|
||||
|
||||
// Set the operatingmode on the template message
|
||||
MitsubishiTemplate[5] = powerMode;
|
||||
MitsubishiTemplate[6] = operatingMode;
|
||||
|
||||
// Set the temperature on the template message
|
||||
if (temperature == 10) {
|
||||
MitsubishiTemplate[7] = 0x00; // Maintenance mode
|
||||
MitsubishiTemplate[15] = 0x20; // This seems to be set to 0x20 on maintenance mode
|
||||
} else {
|
||||
MitsubishiTemplate[7] = temperature - 16;
|
||||
}
|
||||
|
||||
// Set the horizontal air direction on the template message
|
||||
MitsubishiTemplate[8] = swingH;
|
||||
|
||||
// Set the fan speed and vertical air direction on the template message
|
||||
MitsubishiTemplate[9] = fanSpeed | swingV;
|
||||
|
||||
// Calculate the checksum
|
||||
for (int i=0; i<17; i++) {
|
||||
checksum += MitsubishiTemplate[i];
|
||||
}
|
||||
|
||||
MitsubishiTemplate[17] = checksum;
|
||||
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
// The Mitsubishi data is repeated twice
|
||||
for (int j=0; j<2; j++) {
|
||||
// Header
|
||||
IR.mark(MITSUBISHI_AIRCON1_HDR_MARK);
|
||||
IR.space(MITSUBISHI_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Data
|
||||
for (unsigned int i=0; i<sizeof(MitsubishiTemplate); i++) {
|
||||
IR.sendIRByte(MitsubishiTemplate[i], MITSUBISHI_AIRCON1_BIT_MARK, MITSUBISHI_AIRCON1_ZERO_SPACE, MITSUBISHI_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Pause between the first and the second data burst
|
||||
if (j == 0) {
|
||||
IR.mark(MITSUBISHI_AIRCON1_BIT_MARK);
|
||||
IR.space(MITSUBISHI_AIRCON1_MSG_SPACE);
|
||||
}
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(MITSUBISHI_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,79 @@
|
||||
/*
|
||||
Mitsubishi MSZ FD-25 heatpump control (remote control P/N KM09D 0052376)
|
||||
*/
|
||||
#ifndef MitsubishiHeatpumpIR_h
|
||||
#define MitsubishiHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
|
||||
// Mitsubishi MSZ FD-25 timing constants (remote control P/N KM09D 0052376)
|
||||
#define MITSUBISHI_AIRCON1_HDR_MARK 3500
|
||||
#define MITSUBISHI_AIRCON1_HDR_SPACE 1700
|
||||
#define MITSUBISHI_AIRCON1_BIT_MARK 430
|
||||
#define MITSUBISHI_AIRCON1_ONE_SPACE 1250
|
||||
#define MITSUBISHI_AIRCON1_ZERO_SPACE 390
|
||||
#define MITSUBISHI_AIRCON1_MSG_SPACE 17500
|
||||
|
||||
// Mitsubishi codes
|
||||
#define MITSUBISHI_AIRCON1_MODE_AUTO 0x60 // Operating mode
|
||||
#define MITSUBISHI_AIRCON1_MODE_HEAT 0x48
|
||||
#define MITSUBISHI_AIRCON1_MODE_COOL 0x58
|
||||
#define MITSUBISHI_AIRCON1_MODE_DRY 0x50
|
||||
#define MITSUBISHI_AIRCON1_MODE_FAN 0x38 // EF 'FAN' mode
|
||||
#define MITSUBISHI_AIRCON1_MODE_OFF 0x00 // Power OFF
|
||||
#define MITSUBISHI_AIRCON1_MODE_ON 0x20 // Power ON
|
||||
#define MITSUBISHI_AIRCON1_FAN_AUTO 0x00 // Fan speed - mixed with vertical swing...
|
||||
#define MITSUBISHI_AIRCON1_FAN1 0x01
|
||||
#define MITSUBISHI_AIRCON1_FAN2 0x02
|
||||
#define MITSUBISHI_AIRCON1_FAN3 0x03
|
||||
#define MITSUBISHI_AIRCON1_FAN4 0x04
|
||||
|
||||
#define MITSUBISHI_AIRCON1_VS_SWING 0x78 // Vertical swing
|
||||
#define MITSUBISHI_AIRCON1_VS_AUTO 0x40 // Automatic setting
|
||||
#define MITSUBISHI_AIRCON1_VS_UP 0x48
|
||||
#define MITSUBISHI_AIRCON1_VS_MUP 0x50
|
||||
#define MITSUBISHI_AIRCON1_VS_MIDDLE 0x58
|
||||
#define MITSUBISHI_AIRCON1_VS_MDOWN 0x60
|
||||
#define MITSUBISHI_AIRCON1_VS_DOWN 0x68
|
||||
|
||||
#define MITSUBISHI_AIRCON1_VS_AUTO2 0x80 // ???
|
||||
#define MITSUBISHI_AIRCON1_VS_AUTO3 0xB8 // ???
|
||||
|
||||
#define MITSUBISHI_AIRCON1_HS_SWING 0xC0 // Horizontal swing
|
||||
#define MITSUBISHI_AIRCON1_HS_MIDDLE 0x30
|
||||
#define MITSUBISHI_AIRCON1_HS_LEFT 0x10
|
||||
#define MITSUBISHI_AIRCON1_HS_MLEFT 0x20
|
||||
#define MITSUBISHI_AIRCON1_HS_MRIGHT 0x40
|
||||
#define MITSUBISHI_AIRCON1_HS_RIGHT 0x50
|
||||
|
||||
// Mitsubishi model codes
|
||||
#define MITSUBISHI_FD 0
|
||||
#define MITSUBISHI_FE 1
|
||||
|
||||
class MitsubishiHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
protected: // Cannot create generic Mitsubishi heatpump instances
|
||||
MitsubishiHeatpumpIR();
|
||||
byte _mitsubishiModel; // Tells whether this is FD or EF (or other supported model...)
|
||||
|
||||
public:
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
|
||||
private:
|
||||
void sendMitsubishi(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingVCmd, byte swingHCmd);
|
||||
};
|
||||
|
||||
class MitsubishiFDHeatpumpIR : public MitsubishiHeatpumpIR
|
||||
{
|
||||
public:
|
||||
MitsubishiFDHeatpumpIR();
|
||||
};
|
||||
|
||||
class MitsubishiFEHeatpumpIR : public MitsubishiHeatpumpIR
|
||||
{
|
||||
public:
|
||||
MitsubishiFEHeatpumpIR();
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,262 @@
|
||||
#include <PanasonicCKPHeatpumpIR.h>
|
||||
|
||||
|
||||
PanasonicCKPHeatpumpIR::PanasonicCKPHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "panasonic_ckp";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"panasonic_ckp\",\"dn\":\"Panasonic CKP\",\"mT\":16,\"xT\":30,\"fs\":6}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
// Panasonic CKP numeric values to command bytes
|
||||
void PanasonicCKPHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte powerMode = false;
|
||||
byte operatingMode = PANASONIC_AIRCON1_MODE_KEEP;
|
||||
byte fanSpeed = PANASONIC_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
byte swingV = PANASONIC_AIRCON1_VS_UP;
|
||||
byte swingH = PANASONIC_AIRCON1_HS_SWING;
|
||||
|
||||
switch (powerModeCmd)
|
||||
{
|
||||
case POWER_ON:
|
||||
powerMode = true;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode |= PANASONIC_AIRCON1_MODE_AUTO;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode |= PANASONIC_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode |= PANASONIC_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode |= PANASONIC_AIRCON1_MODE_DRY;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode |= PANASONIC_AIRCON1_MODE_FAN;
|
||||
temperatureCmd = 27; // Temperature is always 27 in FAN mode
|
||||
break;
|
||||
default:
|
||||
operatingMode |= PANASONIC_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = PANASONIC_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = PANASONIC_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = PANASONIC_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = PANASONIC_AIRCON1_FAN3;
|
||||
break;
|
||||
case FAN_4:
|
||||
fanSpeed = PANASONIC_AIRCON1_FAN4;
|
||||
break;
|
||||
case FAN_5:
|
||||
fanSpeed = PANASONIC_AIRCON1_FAN5;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 15 && temperatureCmd < 31)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
switch (swingVCmd)
|
||||
{
|
||||
case VDIR_SWING:
|
||||
swingV = PANASONIC_AIRCON1_VS_SWING;
|
||||
break;
|
||||
case VDIR_UP:
|
||||
swingV = PANASONIC_AIRCON1_VS_UP;
|
||||
break;
|
||||
case VDIR_MUP:
|
||||
swingV = PANASONIC_AIRCON1_VS_MUP;
|
||||
break;
|
||||
case VDIR_MIDDLE:
|
||||
swingV = PANASONIC_AIRCON1_VS_MIDDLE;
|
||||
break;
|
||||
case VDIR_MDOWN:
|
||||
swingV = PANASONIC_AIRCON1_VS_MDOWN;
|
||||
break;
|
||||
case VDIR_DOWN:
|
||||
swingV = PANASONIC_AIRCON1_VS_DOWN;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (swingHCmd)
|
||||
{
|
||||
case HDIR_SWING:
|
||||
swingH = PANASONIC_AIRCON1_HS_SWING;
|
||||
break;
|
||||
case HDIR_AUTO: // Well, just set it to manual
|
||||
swingH = PANASONIC_AIRCON1_HS_MANUAL;
|
||||
break;
|
||||
}
|
||||
|
||||
sendPanasonicCKP(IR, operatingMode, fanSpeed, temperature, swingV, swingH);
|
||||
delay(1000); // Sleep 1 second between the messages
|
||||
|
||||
// This will change the power state in one minute from now
|
||||
sendPanasonicCKPOnOffTimerCancel(IR, powerMode, false);
|
||||
/*
|
||||
// Send the 'timer cancel' signal 2 minutes later
|
||||
if (panasonicCancelTimer != 0)
|
||||
{
|
||||
timer.stop(panasonicCancelTimer);
|
||||
panasonicCancelTimer = 0;
|
||||
}
|
||||
|
||||
// Note that the argument to 'timer.after' has to be explicitly cast into 'long'
|
||||
panasonicCancelTimer = timer.after(2L*60L*1000L, sendPanasonicCKPCancelTimer);
|
||||
|
||||
Serial.print(F("'Timer cancel' timer ID: "));
|
||||
Serial.println(panasonicCancelTimer);
|
||||
*/
|
||||
}
|
||||
|
||||
// Send the Panasonic CKP code
|
||||
void PanasonicCKPHeatpumpIR::sendPanasonicCKP(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH)
|
||||
{
|
||||
byte sendBuffer[4];
|
||||
|
||||
// Fan speed & temperature, temperature needs to be 27 in FAN mode
|
||||
if (operatingMode == PANASONIC_AIRCON1_MODE_FAN || operatingMode == (PANASONIC_AIRCON1_MODE_FAN | PANASONIC_AIRCON1_MODE_KEEP ))
|
||||
{
|
||||
temperature = 27;
|
||||
}
|
||||
|
||||
sendBuffer[0] = fanSpeed | (temperature - 15);
|
||||
|
||||
// Power toggle & operation mode
|
||||
sendBuffer[1] = operatingMode;
|
||||
|
||||
// Swings
|
||||
sendBuffer[2] = swingV | swingH;
|
||||
|
||||
// Always 0x36
|
||||
sendBuffer[3] = 0x36;
|
||||
|
||||
// Send the code
|
||||
sendPanasonicCKPraw(IR, sendBuffer);
|
||||
}
|
||||
|
||||
// Send the Panasonic CKP raw code
|
||||
void PanasonicCKPHeatpumpIR::sendPanasonicCKPraw(IRSender& IR, byte sendBuffer[])
|
||||
{
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
// Header, two first bytes repeated
|
||||
IR.mark(PANASONIC_AIRCON1_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_HDR_SPACE);
|
||||
|
||||
for (int i=0; i<2; i++) {
|
||||
IR.sendIRByte(sendBuffer[0], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[0], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[1], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[1], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_HDR_SPACE);
|
||||
}
|
||||
|
||||
// Pause
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_BIT_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_MSG_SPACE);
|
||||
|
||||
// Header, two last bytes repeated
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_HDR_SPACE);
|
||||
|
||||
for (int i=0; i<2; i++) {
|
||||
IR.sendIRByte(sendBuffer[2], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[2], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[3], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[3], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_HDR_SPACE);
|
||||
}
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
|
||||
// Send the Panasonic CKP On/Off code
|
||||
//
|
||||
// CKP does not have discrete ON/OFF commands, but this can be emulated by using the timer
|
||||
// The side-effects of using the timer are:
|
||||
// * ONE minute delay before the power state changes
|
||||
// * the 'TIMER' led (orange) is lit
|
||||
// * a timer event is scheduled to cancel the timer after TWO minutes (the 'TIMER' led turns off
|
||||
void PanasonicCKPHeatpumpIR::sendPanasonicCKPOnOffTimerCancel(IRSender& IR, boolean powerState, boolean cancelTimer)
|
||||
{
|
||||
static const prog_uint8_t ON_msg[] PROGMEM = { 0x7F, 0x38, 0xBF, 0x38, 0x10, 0x3D, 0x80, 0x3D, 0x09, 0x34, 0x80, 0x34 }; // ON at 00:10, time now 00:09, no OFF timing
|
||||
static const prog_uint8_t OFF_msg[] PROGMEM = { 0x10, 0x38, 0x80, 0x38, 0x7F, 0x3D, 0xBF, 0x3D, 0x09, 0x34, 0x80, 0x34 }; // OFF at 00:10, time now 00:09, no ON timing
|
||||
static const prog_uint8_t CANCEL_msg[] PROGMEM = { 0x7F, 0x38, 0xBF, 0x38, 0x7F, 0x3D, 0xBF, 0x3D, 0x17, 0x34, 0x80, 0x34 }; // Timer CANCEL
|
||||
|
||||
// Save some SRAM by only having one copy of the template on the SRAM
|
||||
byte sendBuffer[sizeof(ON_msg)];
|
||||
|
||||
if ( cancelTimer == true ) {
|
||||
memcpy_P(sendBuffer, CANCEL_msg, sizeof(ON_msg));
|
||||
} else if ( powerState == true ) {
|
||||
memcpy_P(sendBuffer, ON_msg, sizeof(ON_msg));
|
||||
} else {
|
||||
memcpy_P(sendBuffer, OFF_msg, sizeof(ON_msg));
|
||||
}
|
||||
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
for (int i=0; i<6; i++) {
|
||||
IR.mark(PANASONIC_AIRCON1_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_HDR_SPACE);
|
||||
|
||||
IR.sendIRByte(sendBuffer[i*2 + 0], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[i*2 + 0], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[i*2 + 1], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
IR.sendIRByte(sendBuffer[i*2 + 1], PANASONIC_AIRCON1_BIT_MARK, PANASONIC_AIRCON1_ZERO_SPACE, PANASONIC_AIRCON1_ONE_SPACE);
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_HDR_SPACE);
|
||||
|
||||
if ( i < 5 ) {
|
||||
IR.mark(PANASONIC_AIRCON1_BIT_MARK);
|
||||
IR.space(PANASONIC_AIRCON1_MSG_SPACE);
|
||||
}
|
||||
}
|
||||
|
||||
IR.mark(PANASONIC_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
|
||||
// Send the Panasonic CKP timer cancel
|
||||
void PanasonicCKPHeatpumpIR::sendPanasonicCKPCancelTimer(IRSender& IR)
|
||||
{
|
||||
Serial.println(F("Sending Panasonic CKP timer cancel"));
|
||||
|
||||
sendPanasonicCKPOnOffTimerCancel(IR, false, true);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,55 @@
|
||||
/*
|
||||
Panasonic CKP heatpump control (remote control P/N A75C2295)
|
||||
*/
|
||||
#ifndef PanasonicCKPHeatpumpIR_h
|
||||
#define PanasonicCKPHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
|
||||
// Panasonic CKP timing constants (remote control P/N A75C2295)
|
||||
#define PANASONIC_AIRCON1_HDR_MARK 3400
|
||||
#define PANASONIC_AIRCON1_HDR_SPACE 3500
|
||||
#define PANASONIC_AIRCON1_BIT_MARK 800
|
||||
#define PANASONIC_AIRCON1_ONE_SPACE 2700
|
||||
#define PANASONIC_AIRCON1_ZERO_SPACE 1000
|
||||
#define PANASONIC_AIRCON1_MSG_SPACE 14000
|
||||
|
||||
// Panasonic CKP codes
|
||||
#define PANASONIC_AIRCON1_MODE_AUTO 0x06 // Operating mode
|
||||
#define PANASONIC_AIRCON1_MODE_HEAT 0x04
|
||||
#define PANASONIC_AIRCON1_MODE_COOL 0x02
|
||||
#define PANASONIC_AIRCON1_MODE_DRY 0x03
|
||||
#define PANASONIC_AIRCON1_MODE_FAN 0x01
|
||||
#define PANASONIC_AIRCON1_MODE_ONOFF 0x00 // Toggle ON/OFF
|
||||
#define PANASONIC_AIRCON1_MODE_KEEP 0x08 // Do not toggle ON/OFF
|
||||
#define PANASONIC_AIRCON1_FAN_AUTO 0xF0 // Fan speed
|
||||
#define PANASONIC_AIRCON1_FAN1 0x20
|
||||
#define PANASONIC_AIRCON1_FAN2 0x30
|
||||
#define PANASONIC_AIRCON1_FAN3 0x40
|
||||
#define PANASONIC_AIRCON1_FAN4 0x50
|
||||
#define PANASONIC_AIRCON1_FAN5 0x60
|
||||
#define PANASONIC_AIRCON1_VS_SWING 0xF0 // Vertical swing
|
||||
#define PANASONIC_AIRCON1_VS_UP 0x90
|
||||
#define PANASONIC_AIRCON1_VS_MUP 0xA0
|
||||
#define PANASONIC_AIRCON1_VS_MIDDLE 0xB0
|
||||
#define PANASONIC_AIRCON1_VS_MDOWN 0xC0
|
||||
#define PANASONIC_AIRCON1_VS_DOWN 0xD0
|
||||
#define PANASONIC_AIRCON1_HS_SWING 0x08 // Horizontal swing
|
||||
#define PANASONIC_AIRCON1_HS_MANUAL 0x00
|
||||
|
||||
|
||||
class PanasonicCKPHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
PanasonicCKPHeatpumpIR();
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
void sendPanasonicCKPCancelTimer(IRSender& IR);
|
||||
|
||||
private:
|
||||
void sendPanasonicCKP(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH);
|
||||
void sendPanasonicCKPraw(IRSender& IR, byte sendBuffer[]);
|
||||
void sendPanasonicCKPOnOffTimerCancel(IRSender& IR, boolean powerState, boolean cancelTimer);
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,237 @@
|
||||
#include <PanasonicHeatpumpIR.h>
|
||||
|
||||
// This is a protected method, i.e. generic Panasonic instances cannot be created
|
||||
PanasonicHeatpumpIR::PanasonicHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
// The different models just set the model accordingly
|
||||
PanasonicDKEHeatpumpIR::PanasonicDKEHeatpumpIR() : PanasonicHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "panasonic_dke";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"panasonic_dke\",\"dn\":\"Panasonic DKE\",\"mT\":16,\"xT\":30,\"fs\":6}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
|
||||
_panasonicModel = PANASONIC_DKE;
|
||||
}
|
||||
|
||||
PanasonicJKEHeatpumpIR::PanasonicJKEHeatpumpIR() : PanasonicHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "panasonic_jke";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"panasonic_jke\",\"dn\":\"Panasonic JKE\",\"mT\":16,\"xT\":30,\"fs\":6}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
|
||||
_panasonicModel = PANASONIC_JKE;
|
||||
}
|
||||
|
||||
PanasonicNKEHeatpumpIR::PanasonicNKEHeatpumpIR() : PanasonicHeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "panasonic_nke";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"panasonic_nke\",\"dn\":\"Panasonic NKE\",\"mT\":16,\"xT\":30,\"fs\":6,\"maint\":[8,10]}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
|
||||
_panasonicModel = PANASONIC_NKE;
|
||||
}
|
||||
|
||||
|
||||
// Panasonic DKE/NKE/JKE numeric values to command bytes
|
||||
void PanasonicHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte operatingMode = PANASONIC_AIRCON2_TIMER_CNL;
|
||||
byte fanSpeed = PANASONIC_AIRCON2_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
byte swingV = PANASONIC_AIRCON2_VS_UP;
|
||||
byte swingH = PANASONIC_AIRCON2_HS_AUTO;
|
||||
|
||||
switch (powerModeCmd)
|
||||
{
|
||||
case POWER_ON:
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_ON;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_AUTO;
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_DRY;
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_FAN;
|
||||
temperatureCmd = 27; // Temperature is always 27 in FAN mode
|
||||
break;
|
||||
case MODE_MAINT: // Maintenance mode is just the heat mode at +8 or +10, FAN5
|
||||
operatingMode |= PANASONIC_AIRCON2_MODE_HEAT;
|
||||
temperature = 10; // Default to +10 degrees
|
||||
fanSpeedCmd = FAN_5;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN3;
|
||||
break;
|
||||
case FAN_4:
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN4;
|
||||
break;
|
||||
case FAN_5:
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN5;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 15 && temperatureCmd < 31)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
switch (swingVCmd)
|
||||
{
|
||||
case VDIR_AUTO:
|
||||
case VDIR_SWING:
|
||||
swingV = PANASONIC_AIRCON2_VS_AUTO;
|
||||
break;
|
||||
case VDIR_UP:
|
||||
swingV = PANASONIC_AIRCON2_VS_UP;
|
||||
break;
|
||||
case VDIR_MUP:
|
||||
swingV = PANASONIC_AIRCON2_VS_MUP;
|
||||
break;
|
||||
case VDIR_MIDDLE:
|
||||
swingV = PANASONIC_AIRCON2_VS_MIDDLE;
|
||||
break;
|
||||
case VDIR_MDOWN:
|
||||
swingV = PANASONIC_AIRCON2_VS_MDOWN;
|
||||
break;
|
||||
case VDIR_DOWN:
|
||||
swingV = PANASONIC_AIRCON2_VS_DOWN;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (swingHCmd)
|
||||
{
|
||||
case HDIR_AUTO:
|
||||
case HDIR_SWING:
|
||||
swingH = PANASONIC_AIRCON2_HS_AUTO;
|
||||
break;
|
||||
case HDIR_MIDDLE:
|
||||
swingH = PANASONIC_AIRCON2_HS_MIDDLE;
|
||||
break;
|
||||
case HDIR_LEFT:
|
||||
swingH = PANASONIC_AIRCON2_HS_LEFT;
|
||||
break;
|
||||
case HDIR_MLEFT:
|
||||
swingH = PANASONIC_AIRCON2_HS_MLEFT;
|
||||
break;
|
||||
case HDIR_RIGHT:
|
||||
swingH = PANASONIC_AIRCON2_HS_RIGHT;
|
||||
break;
|
||||
case HDIR_MRIGHT:
|
||||
swingH = PANASONIC_AIRCON2_HS_MRIGHT;
|
||||
break;
|
||||
}
|
||||
|
||||
// NKE has +8 / + 10 maintenance heating, which also means MAX fanspeed
|
||||
if ( _panasonicModel == PANASONIC_NKE )
|
||||
{
|
||||
if ( temperatureCmd == 8 || temperatureCmd == 10 )
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
fanSpeed = PANASONIC_AIRCON2_FAN5;
|
||||
}
|
||||
}
|
||||
|
||||
sendPanasonic(IR, operatingMode, fanSpeed, temperature, swingV, swingH);
|
||||
}
|
||||
|
||||
// Send the Panasonic DKE/JKE/NKE code
|
||||
void PanasonicHeatpumpIR::sendPanasonic(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH)
|
||||
{
|
||||
// Only bytes 13, 14, 16, 17 and 26 are modified, DKE and JKE seem to share the same template?
|
||||
static const prog_uint8_t panasonicProgmemTemplate[][27] PROGMEM = {
|
||||
// DKE, model 0
|
||||
{ 0x02, 0x20, 0xE0, 0x04, 0x00, 0x00, 0x00, 0x06, 0x02, 0x20, 0xE0, 0x04, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x0E, 0xE0, 0x00, 0x00, 0x01, 0x00, 0x06, 0x00 },
|
||||
// JKE, model 1
|
||||
{ 0x02, 0x20, 0xE0, 0x04, 0x00, 0x00, 0x00, 0x06, 0x02, 0x20, 0xE0, 0x04, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x0E, 0xE0, 0x00, 0x00, 0x81, 0x00, 0x00, 0x00 },
|
||||
// NKE, model 2
|
||||
{ 0x02, 0x20, 0xE0, 0x04, 0x00, 0x00, 0x00, 0x06, 0x02, 0x20, 0xE0, 0x04, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x00, 0x0E, 0xE0, 0x00, 0x00, 0x81, 0x00, 0x00, 0x00 }
|
||||
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
|
||||
};
|
||||
|
||||
// Save some SRAM by only having one copy of the template on the SRAM
|
||||
byte panasonicTemplate[27];
|
||||
memcpy_P(panasonicTemplate, panasonicProgmemTemplate[_panasonicModel], sizeof(panasonicTemplate));
|
||||
|
||||
panasonicTemplate[13] = operatingMode;
|
||||
panasonicTemplate[14] = temperature << 1;
|
||||
panasonicTemplate[16] = fanSpeed | swingV;
|
||||
|
||||
// Only the DKE model has a setting for the horizontal air flow
|
||||
if ( _panasonicModel == PANASONIC_DKE) {
|
||||
panasonicTemplate[17] = swingH;
|
||||
}
|
||||
|
||||
// Checksum calculation
|
||||
|
||||
byte checksum = 0xF4;
|
||||
|
||||
for (int i=0; i<26; i++) {
|
||||
checksum += panasonicTemplate[i];
|
||||
}
|
||||
|
||||
panasonicTemplate[26] = checksum;
|
||||
|
||||
// 40 kHz PWM frequency
|
||||
IR.setFrequency(40);
|
||||
|
||||
// Header
|
||||
IR.mark(PANASONIC_AIRCON2_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON2_HDR_SPACE);
|
||||
|
||||
// First 8 bytes
|
||||
for (int i=0; i<8; i++) {
|
||||
IR.sendIRByte(panasonicTemplate[i], PANASONIC_AIRCON2_BIT_MARK, PANASONIC_AIRCON2_ZERO_SPACE, PANASONIC_AIRCON2_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Pause
|
||||
IR.mark(PANASONIC_AIRCON2_BIT_MARK);
|
||||
IR.space(PANASONIC_AIRCON2_MSG_SPACE);
|
||||
|
||||
// Header
|
||||
IR.mark(PANASONIC_AIRCON2_HDR_MARK);
|
||||
IR.space(PANASONIC_AIRCON2_HDR_SPACE);
|
||||
|
||||
// Last 19 bytes
|
||||
for (int i=8; i<27; i++) {
|
||||
IR.sendIRByte(panasonicTemplate[i], PANASONIC_AIRCON2_BIT_MARK, PANASONIC_AIRCON2_ZERO_SPACE, PANASONIC_AIRCON2_ONE_SPACE);
|
||||
}
|
||||
|
||||
IR.mark(PANASONIC_AIRCON2_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,83 @@
|
||||
/*
|
||||
Panasonic DKE/JKE/NKE heatpump control (DKE remote control P/N A75C2616 etc)
|
||||
*/
|
||||
#ifndef PanasonicHeatpumpIR_h
|
||||
#define PanasonicHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
|
||||
// Panasonic DKE, JKE & NKE timing constants (DKE remote control P/N A75C2616)
|
||||
#define PANASONIC_AIRCON2_HDR_MARK 3500
|
||||
#define PANASONIC_AIRCON2_HDR_SPACE 1800
|
||||
#define PANASONIC_AIRCON2_BIT_MARK 420
|
||||
#define PANASONIC_AIRCON2_ONE_SPACE 1350
|
||||
#define PANASONIC_AIRCON2_ZERO_SPACE 470
|
||||
#define PANASONIC_AIRCON2_MSG_SPACE 10000
|
||||
|
||||
// Panasonic DKE, JNE & NKE codes
|
||||
#define PANASONIC_AIRCON2_MODE_AUTO 0x00 // Operating mode
|
||||
#define PANASONIC_AIRCON2_MODE_HEAT 0x40
|
||||
#define PANASONIC_AIRCON2_MODE_COOL 0x30
|
||||
#define PANASONIC_AIRCON2_MODE_DRY 0x20
|
||||
#define PANASONIC_AIRCON2_MODE_FAN 0x60
|
||||
#define PANASONIC_AIRCON2_MODE_OFF 0x00 // Power OFF
|
||||
#define PANASONIC_AIRCON2_MODE_ON 0x01
|
||||
#define PANASONIC_AIRCON2_TIMER_CNL 0x08
|
||||
#define PANASONIC_AIRCON2_FAN_AUTO 0xA0 // Fan speed
|
||||
#define PANASONIC_AIRCON2_FAN1 0x30
|
||||
#define PANASONIC_AIRCON2_FAN2 0x40
|
||||
#define PANASONIC_AIRCON2_FAN3 0x50
|
||||
#define PANASONIC_AIRCON2_FAN4 0x60
|
||||
#define PANASONIC_AIRCON2_FAN5 0x70
|
||||
#define PANASONIC_AIRCON2_VS_AUTO 0x0F // Vertical swing
|
||||
#define PANASONIC_AIRCON2_VS_UP 0x01
|
||||
#define PANASONIC_AIRCON2_VS_MUP 0x02
|
||||
#define PANASONIC_AIRCON2_VS_MIDDLE 0x03
|
||||
#define PANASONIC_AIRCON2_VS_MDOWN 0x04
|
||||
#define PANASONIC_AIRCON2_VS_DOWN 0x05
|
||||
#define PANASONIC_AIRCON2_HS_AUTO 0x0D // Horizontal swing
|
||||
#define PANASONIC_AIRCON2_HS_MIDDLE 0x06
|
||||
#define PANASONIC_AIRCON2_HS_LEFT 0x09
|
||||
#define PANASONIC_AIRCON2_HS_MLEFT 0x0A
|
||||
#define PANASONIC_AIRCON2_HS_MRIGHT 0x0B
|
||||
#define PANASONIC_AIRCON2_HS_RIGHT 0x0C
|
||||
|
||||
// Panasonic model codes
|
||||
#define PANASONIC_DKE 0
|
||||
#define PANASONIC_JKE 1
|
||||
#define PANASONIC_NKE 2
|
||||
|
||||
|
||||
class PanasonicHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
protected: // Cannot create generic Panasonic heatpump instances
|
||||
PanasonicHeatpumpIR();
|
||||
byte _panasonicModel; // Tells whether this is DKE, NKE or JKE (or other supported model...)
|
||||
|
||||
public:
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
|
||||
private:
|
||||
void sendPanasonic(IRSender& IR, byte operatingMode, byte fanSpeed, byte temperature, byte swingV, byte swingH);
|
||||
};
|
||||
|
||||
class PanasonicDKEHeatpumpIR : public PanasonicHeatpumpIR
|
||||
{
|
||||
public:
|
||||
PanasonicDKEHeatpumpIR();
|
||||
};
|
||||
|
||||
class PanasonicJKEHeatpumpIR : public PanasonicHeatpumpIR
|
||||
{
|
||||
public:
|
||||
PanasonicJKEHeatpumpIR();
|
||||
};
|
||||
|
||||
class PanasonicNKEHeatpumpIR : public PanasonicHeatpumpIR
|
||||
{
|
||||
public:
|
||||
PanasonicNKEHeatpumpIR();
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,21 @@
|
||||
arduino-heatpumpir
|
||||
==================
|
||||
|
||||
An Arduino library to control a Panasonic, Midea, Carrier, Fujitsu or Mitsubishi heat pump/split unit air conditioner.
|
||||
Currently supports at least these models
|
||||
* Panasonic E9/E12-CKP (Panasonic remote control P/N A75C2295)
|
||||
* Panasonic E9/E12-DKE (Panasonic remote control P/N A75C2616)
|
||||
* Panasonic E9/E12-JKE and E9/E12-NKE
|
||||
* Midea MSR1-12HRN1-QC2 + MOA1-12HN1-QC2, sold as Ultimate Pro Plus Basic 13FP in Finland (Midea remote control P/N RG51M1/E)
|
||||
* Carrier 42NQV035G / 38NYV035H2 (Carrier remote control P/N WH-L05SE)
|
||||
* Fujitsu Nocria AWYZ14 (remote control P/N AR-PZ2)
|
||||
* Mitsubishi MSZ FD-25, probably also FD-35 (remote control P/N KM09D 0052376)
|
||||
* Hisense AUD (remote control Y-H1-01, Y-H1-02(E), Y-J1, Y-E4-07) probably AUC model
|
||||
|
||||
|
||||
Instructions
|
||||
------------
|
||||
* Download the library, and place it under your personal Arduino 'libraries' directory, under directory 'HeatpumpIR'
|
||||
* See the example sketches
|
||||
|
||||
|
||||
@@ -0,0 +1,175 @@
|
||||
#include <SamsungHeatpumpIR.h>
|
||||
|
||||
SamsungHeatpumpIR::SamsungHeatpumpIR() : HeatpumpIR()
|
||||
{
|
||||
static const char PROGMEM model[] PROGMEM = "samsung";
|
||||
static const char PROGMEM info[] PROGMEM = "{\"mdl\":\"samsung\",\"dn\":\"Samsung\",\"mT\":16,\"xT\":27,\"fs\":4}";
|
||||
|
||||
_model = model;
|
||||
_info = info;
|
||||
}
|
||||
|
||||
|
||||
void SamsungHeatpumpIR::send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd)
|
||||
{
|
||||
(void)swingVCmd;
|
||||
(void)swingHCmd;
|
||||
|
||||
// Sensible defaults for the heat pump mode
|
||||
|
||||
byte powerMode = SAMSUNG_AIRCON1_MODE_ON;
|
||||
byte operatingMode = SAMSUNG_AIRCON1_MODE_HEAT;
|
||||
byte fanSpeed = SAMSUNG_AIRCON1_FAN_AUTO;
|
||||
byte temperature = 23;
|
||||
byte swingV = SAMSUNG_AIRCON1_VS_AUTO;
|
||||
|
||||
if (powerModeCmd == POWER_OFF)
|
||||
{
|
||||
powerMode = SAMSUNG_AIRCON1_MODE_OFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (operatingModeCmd)
|
||||
{
|
||||
case MODE_AUTO:
|
||||
operatingMode = SAMSUNG_AIRCON1_MODE_AUTO;
|
||||
fanSpeedCmd = FAN_AUTO; // Fan speed is always 'AUTO' in AUTO mode
|
||||
break;
|
||||
case MODE_HEAT:
|
||||
operatingMode = SAMSUNG_AIRCON1_MODE_HEAT;
|
||||
break;
|
||||
case MODE_COOL:
|
||||
operatingMode = SAMSUNG_AIRCON1_MODE_COOL;
|
||||
break;
|
||||
case MODE_DRY:
|
||||
operatingMode = SAMSUNG_AIRCON1_MODE_DRY;
|
||||
fanSpeedCmd = FAN_AUTO; // Fan speed is always 'AUTO' in DRY mode
|
||||
break;
|
||||
case MODE_FAN:
|
||||
operatingMode = SAMSUNG_AIRCON1_MODE_FAN;
|
||||
if ( fanSpeedCmd == FAN_AUTO ) {
|
||||
fanSpeedCmd = FAN_1; // Fan speed cannot be 'AUTO' in FAN mode
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
switch (fanSpeedCmd)
|
||||
{
|
||||
case FAN_AUTO:
|
||||
fanSpeed = SAMSUNG_AIRCON1_FAN_AUTO;
|
||||
break;
|
||||
case FAN_1:
|
||||
fanSpeed = SAMSUNG_AIRCON1_FAN1;
|
||||
break;
|
||||
case FAN_2:
|
||||
fanSpeed = SAMSUNG_AIRCON1_FAN2;
|
||||
break;
|
||||
case FAN_3:
|
||||
fanSpeed = SAMSUNG_AIRCON1_FAN3;
|
||||
break;
|
||||
}
|
||||
|
||||
if ( temperatureCmd > 15 && temperatureCmd < 28)
|
||||
{
|
||||
temperature = temperatureCmd;
|
||||
}
|
||||
|
||||
switch (swingVCmd)
|
||||
{
|
||||
case VDIR_SWING:
|
||||
swingV = SAMSUNG_AIRCON1_VS_SWING;
|
||||
break;
|
||||
}
|
||||
|
||||
sendSamsung(IR, powerMode, operatingMode, fanSpeed, temperature, swingV);
|
||||
}
|
||||
|
||||
// Send the Samsung code
|
||||
|
||||
void SamsungHeatpumpIR::sendSamsung(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingV)
|
||||
{
|
||||
byte SamsungTemplate[] = { 0x02, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, // Header part
|
||||
0x01, 0xD2, 0x0F, 0x00, 0x00, 0x00, 0x00, // Always the same data on POWER messages
|
||||
0x01, 0x00, 0xFE, 0x71, 0x00, 0x00, 0x00 }; // The actual data is in this part, on bytes 14-20
|
||||
|
||||
byte SamsungChecksum = 0;
|
||||
|
||||
// Set the power mode on the template message, also add the first part checksum
|
||||
SamsungTemplate[6] = powerMode;
|
||||
if ( powerMode == SAMSUNG_AIRCON1_MODE_ON ) {
|
||||
SamsungTemplate[1] = 0x92;
|
||||
} else {
|
||||
SamsungTemplate[1] = 0xB2;
|
||||
}
|
||||
|
||||
SamsungTemplate[20] = powerMode;
|
||||
|
||||
// Set the fan speed and the operating mode on the template message
|
||||
SamsungTemplate[19] = operatingMode | fanSpeed;
|
||||
|
||||
// Set the temperature on the template message
|
||||
SamsungTemplate[18] = (temperature - 16) << 4;
|
||||
|
||||
// Set the vertical swing mode on the template message
|
||||
SamsungTemplate[16] = swingV;
|
||||
|
||||
// Calculate the byte 15 checksum
|
||||
// Count the number of ONE bits on message bytes 15-20
|
||||
for (byte j=15; j<21; j++) {
|
||||
byte SamsungByte = SamsungTemplate[j];
|
||||
for (byte i=0; i<8; i++) {
|
||||
if ( (SamsungByte & 0x01) == 0x01 ) {
|
||||
SamsungChecksum++;
|
||||
}
|
||||
SamsungByte >>= 1;
|
||||
}
|
||||
}
|
||||
|
||||
// Transform the number of ONE bits to the actual checksum
|
||||
SamsungChecksum = 32 - SamsungChecksum;
|
||||
SamsungChecksum <<= 4;
|
||||
SamsungChecksum += 0x02;
|
||||
|
||||
SamsungTemplate[15] = SamsungChecksum;
|
||||
|
||||
// 38 kHz PWM frequency
|
||||
IR.setFrequency(38);
|
||||
|
||||
// Header
|
||||
IR.mark(SAMSUNG_AIRCON1_HDR_MARK);
|
||||
IR.space(SAMSUNG_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload header part
|
||||
for (int i=0; i<7; i++) {
|
||||
IR.sendIRByte(SamsungTemplate[i], SAMSUNG_AIRCON1_BIT_MARK, SAMSUNG_AIRCON1_ZERO_SPACE, SAMSUNG_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Pause + new header
|
||||
IR.mark(SAMSUNG_AIRCON1_BIT_MARK);
|
||||
IR.space(SAMSUNG_AIRCON1_MSG_SPACE);
|
||||
|
||||
IR.mark(SAMSUNG_AIRCON1_HDR_MARK);
|
||||
IR.space(SAMSUNG_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload power message part
|
||||
for (int i=7; i<14; i++) {
|
||||
IR.sendIRByte(SamsungTemplate[i], SAMSUNG_AIRCON1_BIT_MARK, SAMSUNG_AIRCON1_ZERO_SPACE, SAMSUNG_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// Pause + new header
|
||||
IR.mark(SAMSUNG_AIRCON1_BIT_MARK);
|
||||
IR.space(SAMSUNG_AIRCON1_MSG_SPACE);
|
||||
|
||||
IR.mark(SAMSUNG_AIRCON1_HDR_MARK);
|
||||
IR.space(SAMSUNG_AIRCON1_HDR_SPACE);
|
||||
|
||||
// Payload data message part
|
||||
for (int i=14; i<21; i++) {
|
||||
IR.sendIRByte(SamsungTemplate[i], SAMSUNG_AIRCON1_BIT_MARK, SAMSUNG_AIRCON1_ZERO_SPACE, SAMSUNG_AIRCON1_ONE_SPACE);
|
||||
}
|
||||
|
||||
// End mark
|
||||
IR.mark(SAMSUNG_AIRCON1_BIT_MARK);
|
||||
IR.space(0);
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
/*
|
||||
Samsung AQV12PSBN / AQV09ASA heatpump control (remote control P/N zzz)
|
||||
*/
|
||||
#ifndef SamsungHeatpumpIR_h
|
||||
#define SamsungHeatpumpIR_h
|
||||
|
||||
#include <HeatpumpIR.h>
|
||||
|
||||
// Samsung timing constants
|
||||
#define SAMSUNG_AIRCON1_HDR_MARK 3000
|
||||
#define SAMSUNG_AIRCON1_HDR_SPACE 9000
|
||||
#define SAMSUNG_AIRCON1_BIT_MARK 500
|
||||
#define SAMSUNG_AIRCON1_ONE_SPACE 1500
|
||||
#define SAMSUNG_AIRCON1_ZERO_SPACE 500
|
||||
#define SAMSUNG_AIRCON1_MSG_SPACE 2000
|
||||
|
||||
// Samsung codes
|
||||
#define SAMSUNG_AIRCON1_MODE_AUTO 0x00 // Operating mode
|
||||
#define SAMSUNG_AIRCON1_MODE_HEAT 0x40
|
||||
#define SAMSUNG_AIRCON1_MODE_COOL 0x10
|
||||
#define SAMSUNG_AIRCON1_MODE_DRY 0x20
|
||||
#define SAMSUNG_AIRCON1_MODE_FAN 0x30
|
||||
#define SAMSUNG_AIRCON1_MODE_OFF 0xC0 // Power OFF
|
||||
#define SAMSUNG_AIRCON1_MODE_ON 0xF0 // Power ON
|
||||
#define SAMSUNG_AIRCON1_FAN_AUTO 0x01 // Fan speed
|
||||
#define SAMSUNG_AIRCON1_FAN1 0x05 // * low
|
||||
#define SAMSUNG_AIRCON1_FAN2 0x09 // * med
|
||||
#define SAMSUNG_AIRCON1_FAN3 0x0B // * high
|
||||
#define SAMSUNG_AIRCON1_VS_SWING 0xAE // Vertical swing
|
||||
#define SAMSUNG_AIRCON1_VS_AUTO 0xFE
|
||||
|
||||
class SamsungHeatpumpIR : public HeatpumpIR
|
||||
{
|
||||
public:
|
||||
SamsungHeatpumpIR();
|
||||
void send(IRSender& IR, byte powerModeCmd, byte operatingModeCmd, byte fanSpeedCmd, byte temperatureCmd, byte swingVCmd, byte swingHCmd);
|
||||
|
||||
private:
|
||||
void sendSamsung(IRSender& IR, byte powerMode, byte operatingMode, byte fanSpeed, byte temperature, byte swingV);
|
||||
};
|
||||
|
||||
#endif
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 2.6 MiB |
@@ -0,0 +1,56 @@
|
||||
#include <HisenseHeatpumpIR.h>
|
||||
|
||||
IRSender irSender(3); // IR led on Duemilanove digital pin 3
|
||||
|
||||
HisenseHeatpumpIR *heatpumpIR;
|
||||
|
||||
void setup()
|
||||
{
|
||||
|
||||
Serial.begin(9600);
|
||||
delay(500);
|
||||
heatpumpIR = new HisenseHeatpumpIR();
|
||||
Serial.println(F("Starting"));
|
||||
|
||||
|
||||
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
int i = 0;
|
||||
prog_char* buf;
|
||||
|
||||
|
||||
// Send the same IR command to all supported heatpumps
|
||||
Serial.print(F("Sending IR to "));
|
||||
// Print the model
|
||||
buf = (prog_char*)heatpumpIR->model();
|
||||
// 'model' is a PROGMEM pointer, so need to write a byte at a time
|
||||
while (char modelChar = pgm_read_byte(buf++))
|
||||
{
|
||||
Serial.print(modelChar);
|
||||
}
|
||||
Serial.print(F(", info: "));
|
||||
// Print the info
|
||||
buf = (prog_char*)heatpumpIR->info();
|
||||
// 'info' is a PROGMEM pointer, so need to write a byte at a time
|
||||
while (char infoChar = pgm_read_byte(buf++))
|
||||
{
|
||||
Serial.print(infoChar);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_HEAT, FAN_3, 30, VDIR_AUTO, HDIR_AUTO);
|
||||
delay(1500);
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_DRY, FAN_2, 20, VDIR_AUTO, HDIR_AUTO);
|
||||
delay(1500);
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_FAN, FAN_AUTO, 18, VDIR_AUTO, HDIR_AUTO);
|
||||
delay(1500);
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_COOL, FAN_1, 18, VDIR_AUTO, HDIR_AUTO);
|
||||
delay(2500);
|
||||
heatpumpIR->send(irSender, POWER_OFF, NULL, NULL, NULL, NULL, NULL);
|
||||
delay(1500);
|
||||
|
||||
}
|
||||
@@ -0,0 +1,92 @@
|
||||
#include <MideaHeatpumpIR.h> // https://github.com/ToniA/arduino-heatpumpir
|
||||
#include <Button.h> // http://playground.arduino.cc/Code/Button
|
||||
|
||||
/*
|
||||
|
||||
This is a project I did for my my friend's summer cottage. He has an alarm system
|
||||
with some extra relays which can be controlled via GSM SMS messages. With two relays
|
||||
we can have four heatpump states:
|
||||
* relay 1 OFF and relay 2 in any state: heatpump OFF
|
||||
* relay 1 ON and relay 2 OFF: heatpump ON, normal heating state
|
||||
* relay 1 ON and relay 2 ON: heatpump ON, maintenance heating (FP mode on Midea's remote)
|
||||
|
||||
The heatpump is 'Ultimate 12 Pro Plus Inverter', sold by ultimatemarket.com:
|
||||
Midea MSR1U-12HRDN1-QRC4W + MOB-12HFN1-QRC4W, with remote control RG51I20/BGE
|
||||
|
||||
This same sketch would also control the older 'Ultimate Pro Plus 13FP':
|
||||
Midea MSR1-12HRN1-QC2 + MOA1-12HN1-QC2 heatpump control, with remote control RG51M1/E
|
||||
|
||||
... and very likely many other Midea heatpumps...
|
||||
|
||||
|
||||
The Midea 'FP', or 'maintenance mode', is not really a mode even if the HeatpumpIR library
|
||||
interface makes it look like a mode. Instead it's a switch between the 'normal' and 'FP'
|
||||
mode, so to be absolutely sure about the operating mode, we need to turn the heatpump OFF
|
||||
first, and then turn it on (goes into 'normal' mode), and finally switch into 'FP'.
|
||||
|
||||
The IR led is driven by a transistor amplifier. I used 2 ohms as the resistor. I might sound
|
||||
very small, but also the led operates on very short bursts. For example Panasonic uses 2 ohm
|
||||
resistor for the IR led on its remotes.
|
||||
*/
|
||||
|
||||
// Heatpump states
|
||||
const byte heatpumpOff = 0;
|
||||
const byte heatpumpNormal = 1;
|
||||
const byte heatpumpMaintenance = 2;
|
||||
|
||||
Button relay1 = Button(11,PULLUP); // Heatpump ON-OFF state
|
||||
Button relay2 = Button(12,PULLUP); // FP mode (maintenance heating at 8 degrees C) ON-OFF state
|
||||
|
||||
IRSender irSender(9); // IR led on Duemilanove digital pin 9
|
||||
|
||||
byte heatpumpState = heatpumpOff;
|
||||
|
||||
HeatpumpIR *heatpumpIR = new MideaHeatpumpIR();
|
||||
|
||||
void setup(){
|
||||
Serial.begin(9600);
|
||||
delay(500);
|
||||
Serial.println(F("Starting..."));
|
||||
}
|
||||
|
||||
void loop(){
|
||||
|
||||
if (relay1.isPressed()) {
|
||||
// Normal heating operation
|
||||
if (!relay2.isPressed() && heatpumpState != heatpumpNormal) {
|
||||
Serial.println(F("Normal heating operation"));
|
||||
|
||||
Serial.println(F("* Sending power OFF"));
|
||||
heatpumpIR->send(irSender, POWER_OFF, MODE_HEAT, FAN_2, 22, VDIR_UP, HDIR_AUTO);
|
||||
delay(15 * 1000); // 15 seconds, to allow full shutdown
|
||||
|
||||
Serial.println(F("* Sending normal heat command"));
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_HEAT, FAN_2, 22, VDIR_UP, HDIR_AUTO);
|
||||
heatpumpState = heatpumpNormal;
|
||||
|
||||
// Maintenance heating operation
|
||||
} else if (relay2.isPressed() && heatpumpState != heatpumpMaintenance) {
|
||||
Serial.println(F("Maintenance heating operation"));
|
||||
|
||||
Serial.println(F("* Sending power OFF"));
|
||||
heatpumpIR->send(irSender, POWER_OFF, MODE_HEAT, FAN_2, 22, VDIR_UP, HDIR_AUTO);
|
||||
delay(15 * 1000); // 15 seconds, to allow full shutdown
|
||||
|
||||
Serial.println(F("* Sending normal heat command"));
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_HEAT, FAN_2, 22, VDIR_UP, HDIR_AUTO);
|
||||
delay(5 * 1000); // 15 seconds, to allow full start before switching to maintenance
|
||||
|
||||
Serial.println(F("* Switching to maintenance heating"));
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_MAINT, FAN_3, 10, VDIR_UP, HDIR_AUTO);
|
||||
|
||||
heatpumpState = heatpumpMaintenance;
|
||||
}
|
||||
// Power OFF
|
||||
} else if (!relay1.isPressed() && heatpumpState != heatpumpOff) {
|
||||
heatpumpState = heatpumpOff;
|
||||
Serial.println(F("Sending power OFF"));
|
||||
heatpumpIR->send(irSender, POWER_OFF, MODE_HEAT, FAN_2, 22, VDIR_UP, HDIR_AUTO);
|
||||
}
|
||||
|
||||
delay(500); // 0.5 seconds delay
|
||||
}
|
||||
@@ -0,0 +1,204 @@
|
||||
// HeatpumpIR libraries
|
||||
#include <FujitsuHeatpumpIR.h>
|
||||
#include <PanasonicCKPHeatpumpIR.h>
|
||||
#include <PanasonicHeatpumpIR.h>
|
||||
#include <CarrierHeatpumpIR.h>
|
||||
#include <MideaHeatpumpIR.h>
|
||||
#include <MitsubishiHeatpumpIR.h>
|
||||
#include <SamsungHeatpumpIR.h>
|
||||
|
||||
// Timer library, https://github.com/ToniA/Timer
|
||||
#include <Timer.h>
|
||||
|
||||
// MySensors libraries
|
||||
#include <MySensor.h>
|
||||
#include <SPI.h>
|
||||
|
||||
// This MySensors node has three childs, with ID's 1, 2 & 3
|
||||
#define CHILD_1 1
|
||||
#define CHILD_2 2
|
||||
#define CHILD_3 3
|
||||
|
||||
// MySensors definitions
|
||||
MySensor gw;
|
||||
MyMessage irMsg(CHILD_1, V_IR_RECEIVE);
|
||||
// Domoticz does not yet properly support the S_IR sensor type
|
||||
MyMessage textMsg(CHILD_2, V_TEXT);
|
||||
MyMessage sendMsg(CHILD_3, V_LIGHT);
|
||||
|
||||
// Array with all supported heatpump models
|
||||
HeatpumpIR *heatpumpIR[] = { new PanasonicCKPHeatpumpIR(), // 0, keep this if you don't remove the timer for cancelling Panasonic CKP messages
|
||||
new PanasonicDKEHeatpumpIR(), // 1
|
||||
new PanasonicJKEHeatpumpIR(), // 2
|
||||
new PanasonicNKEHeatpumpIR(), // 3
|
||||
new CarrierHeatpumpIR(), // 4
|
||||
new MideaHeatpumpIR(), // 5
|
||||
new FujitsuHeatpumpIR(), // 6
|
||||
new MitsubishiFDHeatpumpIR(), // 7
|
||||
new MitsubishiFEHeatpumpIR(), // 8
|
||||
new SamsungHeatpumpIR() // 9
|
||||
};
|
||||
|
||||
// IR led on PWM output-capable digital pin 3
|
||||
IRSender irSender(3);
|
||||
|
||||
// Timer for sending Panasonic CKP series timer cancellation commands
|
||||
Timer timer;
|
||||
int8_t panasonicCKPTimer = 0;
|
||||
|
||||
// Number of supported models
|
||||
byte models = 0;
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
delay(1000);
|
||||
Serial.println(F("HeatpumpIR sensor starting up..."));
|
||||
|
||||
models = sizeof(heatpumpIR) / sizeof(HeatpumpIR*);
|
||||
Serial.print(F("Number of supported models: ")); Serial.println(models);
|
||||
|
||||
// Auto-assign the node ID, do not forward messages
|
||||
gw.begin(incomingMessage, AUTO, false);
|
||||
|
||||
// Send the sketch version information to the gateway and Controller
|
||||
gw.sendSketchInfo("Heatpump Sensor", "1.0");
|
||||
|
||||
// Register a sensors to the MySensors Gateway
|
||||
gw.present(CHILD_1, S_IR, "IR sender");
|
||||
|
||||
// For Domoticz
|
||||
gw.present(CHILD_2, S_INFO, "IR data");
|
||||
gw.present(CHILD_3, S_LIGHT, "IR send");
|
||||
// The TEXT sensor is not created in Domoticz before data is sent
|
||||
gw.send(textMsg.setSensor(CHILD_2).set("00000000"));
|
||||
}
|
||||
|
||||
|
||||
void loop()
|
||||
{
|
||||
gw.process();
|
||||
timer.update();
|
||||
}
|
||||
|
||||
|
||||
// Handle incoming messages from the MySensors Gateway
|
||||
void incomingMessage(const MyMessage &message) {
|
||||
|
||||
const char *irData;
|
||||
long irCommand;
|
||||
|
||||
// V_IR type message
|
||||
if (message.type==V_IR_SEND) {
|
||||
Serial.println(F("Received IR send command..."));
|
||||
irData = message.getString();
|
||||
Serial.print(F("Code: 0x"));
|
||||
Serial.println(irData);
|
||||
sendHeatpumpIRCommand(irData);
|
||||
}
|
||||
// Domoticz
|
||||
else if (message.type==V_LIGHT) {
|
||||
// When the button is pressed on Domoticz, request the value of the TEXT sensor
|
||||
Serial.println(F("Requesting IR code from Domoticz..."));
|
||||
gw.request(CHILD_2, V_TEXT, 0);
|
||||
} else if (message.type==V_TEXT) {
|
||||
// TEXT sensor value is received as a result of the previous step
|
||||
Serial.println(F("IR code received from Domoticz..."));
|
||||
Serial.print(F("Code: 0x"));
|
||||
|
||||
irData = message.getString();
|
||||
Serial.println(irData);
|
||||
|
||||
sendHeatpumpIRCommand(irData);
|
||||
|
||||
// Set the Domoticz switch back to 'OFF' state
|
||||
gw.send(sendMsg.setSensor(CHILD_3).set(0));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Decode the IR command and send the IR command to the heatpump
|
||||
void sendHeatpumpIRCommand(const char *irCommandString) {
|
||||
|
||||
// irCommandString is an 8-digit hex digit
|
||||
long irCommand = 0;
|
||||
int sscanfStatus = sscanf(irCommandString, "%lx", &irCommand);
|
||||
|
||||
if (sscanfStatus == 1) {
|
||||
Serial.print(F("IR code conversion OK: 0x"));
|
||||
Serial.println(irCommand, HEX);
|
||||
} else {
|
||||
Serial.println(F("Failed to convert IR hex code to number"));
|
||||
}
|
||||
|
||||
/*
|
||||
The heatpump command is packed into a 32-bit hex number, see
|
||||
libraries\HeatpumpIR\HeatpumpIR.h for the constants
|
||||
|
||||
12345678
|
||||
3 MODEL
|
||||
4 POWER
|
||||
5 OPERATING MODE
|
||||
6 FAN SPEED
|
||||
78 TEMPERATURE IN HEX
|
||||
|
||||
00213416 (as an example of a valid code)
|
||||
2 = PanasonicJKE
|
||||
1 = Power ON
|
||||
3 = COOL
|
||||
4 = FAN 4
|
||||
16 = Temperature 22 degrees (0x16 = 22)
|
||||
*/
|
||||
|
||||
byte model = (irCommand & 0x00F00000) >> 20;
|
||||
byte power = (irCommand & 0x00010000) >> 16;
|
||||
byte mode = (irCommand & 0x0000F000) >> 12;
|
||||
byte fan = (irCommand & 0x00000F00) >> 8;
|
||||
byte temp = (irCommand & 0x000000FF);
|
||||
|
||||
prog_char* buf;
|
||||
Serial.print(F("Model: "));
|
||||
|
||||
buf = (prog_char*)heatpumpIR[model]->model();
|
||||
// 'model' is a PROGMEM pointer, so need to write a byte at a time
|
||||
while (char modelChar = pgm_read_byte(buf++))
|
||||
{
|
||||
Serial.print(modelChar);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
Serial.print(F("Model #: ")); Serial.println(model);
|
||||
Serial.print(F("Power: ")); Serial.println(power);
|
||||
Serial.print(F("Mode: ")); Serial.println(mode);
|
||||
Serial.print(F("Fan: ")); Serial.println(fan);
|
||||
Serial.print(F("Temp: ")); Serial.println(temp);
|
||||
|
||||
// Heatpump models start from 0, i.e. model number is always less than the number of different models
|
||||
if (model < models) {
|
||||
// This is a supported model
|
||||
|
||||
// Cancel the timer on Panasonic CKP heatpump
|
||||
if (model == 0) {
|
||||
Serial.println(F("Cancelling timer on Panasonic CKP heatpump..."));
|
||||
timer.stop(panasonicCKPTimer);
|
||||
}
|
||||
|
||||
Serial.println(F("All OK - sending IR command to heatpump..."));
|
||||
heatpumpIR[model]->send(irSender, power, mode, fan, temp, VDIR_UP, HDIR_AUTO);
|
||||
|
||||
if (model == 0) {
|
||||
Serial.println(F("Scheduling timer cancellation on Panasonic CKP heatpump..."));
|
||||
panasonicCKPTimer = timer.after(120000, panasonicCancelTimer, (void *)NULL); // Called after 2 minutes
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Cancel the timer on the Panasonic CKP heatpump
|
||||
void panasonicCancelTimer(void *context)
|
||||
{
|
||||
PanasonicCKPHeatpumpIR *panasonicCKPHeatpumpIR = new PanasonicCKPHeatpumpIR();
|
||||
|
||||
panasonicCKPHeatpumpIR->sendPanasonicCKPCancelTimer(irSender);
|
||||
Serial.println(F("The TIMER led should now be OFF"));
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
# MySensors example
|
||||
|
||||
This example shows how HeatpumpIR could be integrated with the MySensors sensor network. As this sensor sends infrared signals,
|
||||
the natural sensor type is 'S_IR'. The heatpump/air conditioner signals are really long, so the signals need to be encoded somehow.
|
||||
|
||||
In this example the idea is to encode just this information, using 24 bits of data
|
||||
* model code (see the index of the array heatpumpIR in the code)
|
||||
* power state (for the rest, see the HeatpumpIR.h file for the constants)
|
||||
* operating mode
|
||||
* fan speed
|
||||
* temperature (the temperature is directly the temperature in HEX)
|
||||
|
||||
```
|
||||
An example:
|
||||
00213416 (as an example of a valid code)
|
||||
2 = PanasonicJKE
|
||||
1 = Power ON
|
||||
3 = COOL
|
||||
4 = FAN 4
|
||||
16 = Temperature 22 degrees (0x16 = 22)
|
||||
```
|
||||
|
||||
This sketch creates three sensors:
|
||||
* S_IR
|
||||
* S_INFO
|
||||
* S_LIGHT
|
||||
|
||||
The S_INFO and S_LIGHT sensors are for Domoticz, as it does not currently (as of V2.3093) support infrared code sending through the S_IR sensor type.
|
||||
|
||||
## Sending the code
|
||||
### MYSController
|
||||
|
||||
* Select the IR sensor on the 'Heatpump Sensor 1.0' node
|
||||
* Select 'IR_SEND' as the subtype
|
||||
* Enter for example '00213416' as the payload
|
||||
|
||||
### Domoticz
|
||||
|
||||
As Domoticz does not really support sending IR code yet, the workaround is to use two sensors. When the node is connected, Domoticz should find two new devices
|
||||
* A 'Lighting 2 / AC' type sensor with name 'IR send'
|
||||
* A 'General / Text' type sensor with name 'Unknown' and Data '00000000'
|
||||
|
||||
To send a command, first add the sensors. Then update the data of the text sensor to contain the IR code to be sent, and then flip the switch to trigger the sending.
|
||||
The data can be updated through the JSON REST API, or through the Lua event scripts.
|
||||
|
||||
REST API example (assuming that the idx of the text sensor is 105 and the switch is 104, and Domoticz is at 192.168.0.4:8080):
|
||||
```
|
||||
http://192.168.0.4:8080/json.htm?type=command¶m=udevice&idx=105&nvalue=0&svalue=00213416
|
||||
http://192.168.0.4:8080/json.htm?type=command¶m=switchlight&idx=104&switchcmd=On
|
||||
```
|
||||
|
||||
Lua example:
|
||||
* Seems that the text sensor can't be updated through the commandArray...
|
||||
* So now when a device called 'trigger' changes, the text sensor value is first updated to '00213416', and then the IR signal is sent
|
||||
|
||||
```
|
||||
commandArray = {}
|
||||
|
||||
for key, value in pairs(devicechanged) do
|
||||
if (key == 'trigger') then
|
||||
|
||||
print("Heatpump script")
|
||||
commandArray['OpenURL']='http://192.168.0.4:8080/json.htm?type=command¶m=udevice&idx=105&nvalue=0&svalue=00213416'
|
||||
commandArray['IR send']='On'
|
||||
end
|
||||
end
|
||||
|
||||
return commandArray
|
||||
```
|
||||
|
||||
## Hardware
|
||||
|
||||
Use any ATMega328-based Arduino, connect the radio, and finally connect an infrared led (in series with a resistor, like 100 Ohm) between digital pin 3 and GND.
|
||||
@@ -0,0 +1,56 @@
|
||||
#include <PanasonicCKPHeatpumpIR.h>
|
||||
#include <Timer.h>
|
||||
|
||||
/*
|
||||
This schema demonstrates how to control the Panasonic CKP power state change. The CKP does not have discrete
|
||||
'ON' and 'OFF' commands, but only a state switch. So, if the initial power state is now known, switching the
|
||||
state does not help much.
|
||||
|
||||
Luckily this can be implemented by using the timer:
|
||||
* The 'send' command will send all the settings AND program the timer so that the pump will turn ON in a minute
|
||||
* The 'sendPanasonicCKPCancelTimer' will cancel the timer
|
||||
|
||||
The 'turn OFF' must be implemented the same way.
|
||||
|
||||
Of course you can choose to not turn off the timer, but that means that the heatpump will attempt to switch ON
|
||||
(or OFF) every day at the same time, as the timer will still be active.
|
||||
*/
|
||||
|
||||
|
||||
IRSender irSender(3); // IR led on Duemilanove digital pin 3
|
||||
|
||||
PanasonicCKPHeatpumpIR *heatpumpIR;
|
||||
|
||||
Timer timer;
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(9600);
|
||||
delay(500);
|
||||
|
||||
heatpumpIR = new PanasonicCKPHeatpumpIR();
|
||||
|
||||
Serial.println("Turning the Panasonic CKP heatpump ON by using the timer");
|
||||
heatpumpIR->send(irSender, POWER_ON, MODE_HEAT, FAN_2, 24, VDIR_UP, HDIR_AUTO);
|
||||
Serial.println("The heatpump should have beeped, and the TIMER led should be ON");
|
||||
|
||||
timer.after(60000, panasonicIsOn, NULL); // Called after 1 minute
|
||||
timer.after(120000, panasonicCancelTimer, NULL); // Called after 2 minutes
|
||||
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
timer.update();
|
||||
}
|
||||
|
||||
void panasonicIsOn(void *context)
|
||||
{
|
||||
Serial.println("The heatpump should should turn ON by now, the TIMER led is still ON");
|
||||
}
|
||||
|
||||
void panasonicCancelTimer(void *context)
|
||||
{
|
||||
heatpumpIR->sendPanasonicCKPCancelTimer(irSender);
|
||||
Serial.println("The TIMER led should now be OFF");
|
||||
}
|
||||
@@ -0,0 +1,57 @@
|
||||
#include <FujitsuHeatpumpIR.h>
|
||||
#include <PanasonicCKPHeatpumpIR.h>
|
||||
#include <PanasonicHeatpumpIR.h>
|
||||
#include <CarrierHeatpumpIR.h>
|
||||
#include <MideaHeatpumpIR.h>
|
||||
#include <MitsubishiHeatpumpIR.h>
|
||||
#include <SamsungHeatpumpIR.h>
|
||||
|
||||
IRSender irSender(3); // IR led on Duemilanove digital pin 3
|
||||
|
||||
// Array with all supported heatpumps
|
||||
HeatpumpIR *heatpumpIR[] = {new PanasonicCKPHeatpumpIR(), new PanasonicDKEHeatpumpIR(), new PanasonicJKEHeatpumpIR(),
|
||||
new PanasonicNKEHeatpumpIR(), new CarrierHeatpumpIR(), new MideaHeatpumpIR(),
|
||||
new FujitsuHeatpumpIR(), new MitsubishiFDHeatpumpIR(), new MitsubishiFEHeatpumpIR(),
|
||||
new SamsungHeatpumpIR(), NULL};
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(9600);
|
||||
delay(500);
|
||||
|
||||
Serial.println(F("Starting"));
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
int i = 0;
|
||||
prog_char* buf;
|
||||
|
||||
do {
|
||||
// Send the same IR command to all supported heatpumps
|
||||
Serial.print(F("Sending IR to "));
|
||||
|
||||
buf = (prog_char*)heatpumpIR[i]->model();
|
||||
// 'model' is a PROGMEM pointer, so need to write a byte at a time
|
||||
while (char modelChar = pgm_read_byte(buf++))
|
||||
{
|
||||
Serial.print(modelChar);
|
||||
}
|
||||
Serial.print(F(", info: "));
|
||||
|
||||
buf = (prog_char*)heatpumpIR[i]->info();
|
||||
// 'info' is a PROGMEM pointer, so need to write a byte at a time
|
||||
while (char infoChar = pgm_read_byte(buf++))
|
||||
{
|
||||
Serial.print(infoChar);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
// Send the IR command
|
||||
heatpumpIR[i]->send(irSender, POWER_ON, MODE_HEAT, FAN_2, 24, VDIR_UP, HDIR_AUTO);
|
||||
delay(500);
|
||||
}
|
||||
while (heatpumpIR[++i] != NULL);
|
||||
|
||||
delay(2000);
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
HeatpumpIR KEYWORD1
|
||||
PanasonicHeatpumpIR KEYWORD1
|
||||
PanasonicCKPHeatpumpIR KEYWORD1
|
||||
PanasonicDKEHeatpumpIR KEYWORD1
|
||||
PanasonicJKEHeatpumpIR KEYWORD1
|
||||
PanasonicNKEHeatpumpIR KEYWORD1
|
||||
CarrierHeatpumpIR KEYWORD1
|
||||
MideaHeatpumpIR KEYWORD1
|
||||
FujitsuHeatpumpIR KEYWORD1
|
||||
MitsubishiHeatpumpIR KEYWORD1
|
||||
MitsubishiFDHeatpumpIR KEYWORD1
|
||||
MitsubishiFEHeatpumpIR KEYWORD1
|
||||
SamsungHeatpumpIR KEYWORD1
|
||||
|
||||
IRSender KEYWORD1
|
||||
|
||||
setFrequency KEYWORD2
|
||||
sendIRByte KEYWORD2
|
||||
bitReverse KEYWORD2
|
||||
space KEYWORD2
|
||||
mark KEYWORD2
|
||||
|
||||
send KEYWORD2
|
||||
model KEYWORD2
|
||||
info KEYWORD2
|
||||
sendPanasonicCKPCancelTimer KEYWORD2
|
||||
@@ -0,0 +1,208 @@
|
||||
// HeatpumpIR libraries, https://github.com/ToniA/arduino-heatpumpir
|
||||
#include <FujitsuHeatpumpIR.h>
|
||||
#include <PanasonicCKPHeatpumpIR.h>
|
||||
#include <PanasonicHeatpumpIR.h>
|
||||
#include <CarrierHeatpumpIR.h>
|
||||
#include <MideaHeatpumpIR.h>
|
||||
#include <MitsubishiHeatpumpIR.h>
|
||||
#include <SamsungHeatpumpIR.h>
|
||||
|
||||
// Timer library, https://github.com/JChristensen/Timer
|
||||
#include <Timer.h>
|
||||
|
||||
// MySensors libraries
|
||||
#include <MySensor.h>
|
||||
#include <SPI.h>
|
||||
|
||||
// Child ID's of this node
|
||||
#define CHILD_1 1
|
||||
|
||||
// MySensors definitions
|
||||
MySensor gw;
|
||||
MyMessage irMsg(CHILD_1, V_IR_RECEIVE);
|
||||
|
||||
// -- Hacks for Domoticz start
|
||||
#define CHILD_2 2
|
||||
#define CHILD_3 3
|
||||
// Domoticz does not yet properly support the S_IR sensor type
|
||||
MyMessage textMsg(CHILD_2, V_TEXT);
|
||||
MyMessage sendMsg(CHILD_3, V_LIGHT);
|
||||
// -- Hacks for Domoticz end
|
||||
|
||||
// Array with all supported heatpump models
|
||||
HeatpumpIR *heatpumpIR[] = { new PanasonicCKPHeatpumpIR(), // 0, keep this if you don't remove the timer for cancelling Panasonic CKP messages
|
||||
new PanasonicDKEHeatpumpIR(), // 1
|
||||
new PanasonicJKEHeatpumpIR(), // 2
|
||||
new PanasonicNKEHeatpumpIR(), // 3
|
||||
new CarrierHeatpumpIR(), // 4
|
||||
new MideaHeatpumpIR(), // 5
|
||||
new FujitsuHeatpumpIR(), // 6
|
||||
new MitsubishiFDHeatpumpIR(), // 7
|
||||
new MitsubishiFEHeatpumpIR(), // 8
|
||||
new SamsungHeatpumpIR() // 9
|
||||
};
|
||||
|
||||
// IR led on PWM output-capable digital pin 3
|
||||
IRSender irSender(3);
|
||||
|
||||
// Timer for sending Panasonic CKP series timer cancellation commands
|
||||
Timer timer;
|
||||
int8_t panasonicCKPTimer = 0;
|
||||
|
||||
// Number of supported models
|
||||
byte models = 0;
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
delay(1000);
|
||||
Serial.println(F("HeatpumpIR sensor starting up..."));
|
||||
|
||||
models = sizeof(heatpumpIR) / sizeof(HeatpumpIR*);
|
||||
Serial.print(F("Number of supported models: ")); Serial.println(models);
|
||||
|
||||
// Auto-assign the node ID, do not forward messages
|
||||
gw.begin(incomingMessage, AUTO, false);
|
||||
|
||||
// Send the sketch version information to the gateway and Controller
|
||||
gw.sendSketchInfo("Heatpump Sensor", "1.0");
|
||||
|
||||
// Register a sensors to the MySensors Gateway
|
||||
gw.present(CHILD_1, S_IR, "IR sender");
|
||||
|
||||
// -- Hacks for Domoticz start
|
||||
gw.present(CHILD_2, S_INFO, "IR data");
|
||||
gw.present(CHILD_3, S_LIGHT, "IR send");
|
||||
// The TEXT sensor is not created in Domoticz before data is sent
|
||||
gw.send(textMsg.setSensor(CHILD_2).set("00000000"));
|
||||
// -- Hacks for Domoticz end
|
||||
}
|
||||
|
||||
|
||||
void loop()
|
||||
{
|
||||
gw.process();
|
||||
timer.update();
|
||||
}
|
||||
|
||||
|
||||
// Handle incoming messages from the MySensors Gateway
|
||||
void incomingMessage(const MyMessage &message) {
|
||||
|
||||
const char *irData;
|
||||
|
||||
// V_IR type message
|
||||
if (message.type==V_IR_SEND) {
|
||||
Serial.println(F("Received IR send command..."));
|
||||
irData = message.getString();
|
||||
Serial.print(F("Code: 0x"));
|
||||
Serial.println(irData);
|
||||
sendHeatpumpIRCommand(irData);
|
||||
}
|
||||
// -- Hacks for Domoticz start
|
||||
else if (message.type==V_LIGHT) {
|
||||
// When the button is pressed on Domoticz, request the value of the TEXT sensor
|
||||
Serial.println(F("Requesting IR code from Domoticz..."));
|
||||
gw.request(CHILD_2, V_TEXT, 0);
|
||||
} else if (message.type==V_TEXT) {
|
||||
// TEXT sensor value is received as a result of the previous step
|
||||
Serial.println(F("IR code received from Domoticz..."));
|
||||
Serial.print(F("Code: 0x"));
|
||||
|
||||
irData = message.getString();
|
||||
Serial.println(irData);
|
||||
|
||||
sendHeatpumpIRCommand(irData);
|
||||
|
||||
// Set the Domoticz switch back to 'OFF' state
|
||||
gw.send(sendMsg.setSensor(CHILD_3).set(0));
|
||||
}
|
||||
// -- Hacks for Domoticz end
|
||||
}
|
||||
|
||||
|
||||
// Decode the IR command and send the IR command to the heatpump
|
||||
void sendHeatpumpIRCommand(const char *irCommandString) {
|
||||
|
||||
// irCommandString is an 8-digit hex digit
|
||||
long irCommand = 0;
|
||||
int sscanfStatus = sscanf(irCommandString, "%lx", &irCommand);
|
||||
|
||||
if (sscanfStatus == 1) {
|
||||
Serial.print(F("IR code conversion OK: 0x"));
|
||||
Serial.println(irCommand, HEX);
|
||||
} else {
|
||||
Serial.println(F("Failed to convert IR hex code to number"));
|
||||
}
|
||||
|
||||
/*
|
||||
The heatpump command is packed into a 32-bit hex number, see
|
||||
libraries\HeatpumpIR\HeatpumpIR.h for the constants
|
||||
|
||||
12345678
|
||||
3 MODEL
|
||||
4 POWER
|
||||
5 OPERATING MODE
|
||||
6 FAN SPEED
|
||||
78 TEMPERATURE IN HEX
|
||||
|
||||
00213416 (as an example of a valid code)
|
||||
2 = PanasonicJKE
|
||||
1 = Power ON
|
||||
3 = COOL
|
||||
4 = FAN 4
|
||||
16 = Temperature 22 degrees (0x16 = 22)
|
||||
*/
|
||||
|
||||
byte model = (irCommand & 0x00F00000) >> 20;
|
||||
byte power = (irCommand & 0x00010000) >> 16;
|
||||
byte mode = (irCommand & 0x0000F000) >> 12;
|
||||
byte fan = (irCommand & 0x00000F00) >> 8;
|
||||
byte temp = (irCommand & 0x000000FF);
|
||||
|
||||
const char* buf;
|
||||
Serial.print(F("Model: "));
|
||||
|
||||
buf = heatpumpIR[model]->model();
|
||||
// 'model' is a PROGMEM pointer, so need to write a byte at a time
|
||||
while (char modelChar = pgm_read_byte(buf++))
|
||||
{
|
||||
Serial.print(modelChar);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
Serial.print(F("Model #: ")); Serial.println(model);
|
||||
Serial.print(F("Power: ")); Serial.println(power);
|
||||
Serial.print(F("Mode: ")); Serial.println(mode);
|
||||
Serial.print(F("Fan: ")); Serial.println(fan);
|
||||
Serial.print(F("Temp: ")); Serial.println(temp);
|
||||
|
||||
// Heatpump models start from 0, i.e. model number is always less than the number of different models
|
||||
if (model < models) {
|
||||
// This is a supported model
|
||||
|
||||
// Cancel the timer on Panasonic CKP heatpump
|
||||
if (model == 0) {
|
||||
Serial.println(F("Cancelling timer on Panasonic CKP heatpump..."));
|
||||
timer.stop(panasonicCKPTimer);
|
||||
}
|
||||
|
||||
Serial.println(F("All OK - sending IR command to heatpump..."));
|
||||
heatpumpIR[model]->send(irSender, power, mode, fan, temp, VDIR_UP, HDIR_AUTO);
|
||||
|
||||
if (model == 0) {
|
||||
Serial.println(F("Scheduling timer cancellation on Panasonic CKP heatpump..."));
|
||||
panasonicCKPTimer = timer.after(120000, panasonicCancelTimer); // Called after 2 minutes
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Cancel the timer on the Panasonic CKP heatpump
|
||||
void panasonicCancelTimer()
|
||||
{
|
||||
PanasonicCKPHeatpumpIR *panasonicCKPHeatpumpIR = new PanasonicCKPHeatpumpIR();
|
||||
|
||||
panasonicCKPHeatpumpIR->sendPanasonicCKPCancelTimer(irSender);
|
||||
Serial.println(F("The TIMER led should now be OFF"));
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
# MySensors example
|
||||
|
||||
This example shows how HeatpumpIR could be integrated with the MySensors sensor network. As this sensor sends infrared signals,
|
||||
the natural sensor type is 'S_IR'. The heatpump/air conditioner signals are really long, so the signals need to be encoded somehow.
|
||||
|
||||
In this example the idea is to encode just this information, using 24 bits of data
|
||||
* model code (see the index of the array heatpumpIR in the code)
|
||||
* power state (for the rest, see the HeatpumpIR.h file for the constants)
|
||||
* operating mode
|
||||
* fan speed
|
||||
* temperature (the temperature is directly the temperature in HEX)
|
||||
|
||||
```
|
||||
An example:
|
||||
00213416 (as an example of a valid code)
|
||||
2 = PanasonicJKE
|
||||
1 = Power ON
|
||||
3 = COOL
|
||||
4 = FAN 4
|
||||
16 = Temperature 22 degrees (0x16 = 22)
|
||||
```
|
||||
|
||||
This sketch creates three sensors:
|
||||
* S_IR
|
||||
* S_INFO
|
||||
* S_LIGHT
|
||||
|
||||
The S_INFO and S_LIGHT sensors are for Domoticz, as it does not currently (as of V2.3093) support infrared code sending through the S_IR sensor type.
|
||||
|
||||
## Sending the code
|
||||
### MYSController
|
||||
|
||||
* Select the IR sensor on the 'Heatpump Sensor 1.0' node
|
||||
* Select 'IR_SEND' as the subtype
|
||||
* Enter for example '00213416' as the payload
|
||||
|
||||
### Domoticz
|
||||
|
||||
As Domoticz does not really support sending IR code yet, the workaround is to use two sensors. When the node is connected, Domoticz should find two new devices
|
||||
* A 'Lighting 2 / AC' type sensor with name 'IR send'
|
||||
* A 'General / Text' type sensor with name 'Unknown' and Data '00000000'
|
||||
|
||||
To send a command, first add the sensors. Then update the data of the text sensor to contain the IR code to be sent, and then flip the switch to trigger the sending.
|
||||
The data can be updated through the JSON REST API, or through the Lua event scripts.
|
||||
|
||||
REST API example (assuming that the idx of the text sensor is 105 and the switch is 104, and Domoticz is at 192.168.0.4:8080):
|
||||
```
|
||||
http://192.168.0.4:8080/json.htm?type=command¶m=udevice&idx=105&nvalue=0&svalue=00213416
|
||||
http://192.168.0.4:8080/json.htm?type=command¶m=switchlight&idx=104&switchcmd=On
|
||||
```
|
||||
|
||||
Lua example:
|
||||
* Seems that the text sensor can't be updated through the commandArray...
|
||||
* So now when a device called 'trigger' changes, the text sensor value is first updated to '00213416', and then the IR signal is sent
|
||||
|
||||
```
|
||||
commandArray = {}
|
||||
|
||||
for key, value in pairs(devicechanged) do
|
||||
if (key == 'trigger') then
|
||||
|
||||
print("Heatpump script")
|
||||
commandArray['OpenURL']='http://192.168.0.4:8080/json.htm?type=command¶m=udevice&idx=105&nvalue=0&svalue=00213416'
|
||||
commandArray['IR send']='On'
|
||||
end
|
||||
end
|
||||
|
||||
return commandArray
|
||||
```
|
||||
|
||||
## Hardware
|
||||
|
||||
Use any ATMega328-based Arduino, connect the radio, and finally connect an infrared led (in series with a resistor, like 100 Ohm) between digital pin 3 and GND.
|
||||
@@ -0,0 +1,65 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
/* * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
||||
Code by Simon Monk
|
||||
http://www.simonmonk.org
|
||||
* * * * * * * * * * * * * * * * * * * * * * * * * * * * */
|
||||
|
||||
// For Arduino 1.0 and earlier
|
||||
#if defined(ARDUINO) && ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "Event.h"
|
||||
|
||||
Event::Event(void)
|
||||
{
|
||||
eventType = EVENT_NONE;
|
||||
}
|
||||
|
||||
void Event::update(void)
|
||||
{
|
||||
unsigned long now = millis();
|
||||
update(now);
|
||||
}
|
||||
|
||||
void Event::update(unsigned long now)
|
||||
{
|
||||
if (now - lastEventTime >= period)
|
||||
{
|
||||
switch (eventType)
|
||||
{
|
||||
case EVENT_EVERY:
|
||||
(*callback)();
|
||||
break;
|
||||
|
||||
case EVENT_OSCILLATE:
|
||||
pinState = ! pinState;
|
||||
digitalWrite(pin, pinState);
|
||||
break;
|
||||
}
|
||||
lastEventTime = now;
|
||||
count++;
|
||||
}
|
||||
if (repeatCount > -1 && count >= repeatCount)
|
||||
{
|
||||
eventType = EVENT_NONE;
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,49 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
/* * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
||||
Code by Simon Monk
|
||||
http://www.simonmonk.org
|
||||
* * * * * * * * * * * * * * * * * * * * * * * * * * * * */
|
||||
|
||||
#ifndef Event_h
|
||||
#define Event_h
|
||||
|
||||
#include <inttypes.h>
|
||||
|
||||
#define EVENT_NONE 0
|
||||
#define EVENT_EVERY 1
|
||||
#define EVENT_OSCILLATE 2
|
||||
|
||||
class Event
|
||||
{
|
||||
|
||||
public:
|
||||
Event(void);
|
||||
void update(void);
|
||||
void update(unsigned long now);
|
||||
int8_t eventType;
|
||||
unsigned long period;
|
||||
int repeatCount;
|
||||
uint8_t pin;
|
||||
uint8_t pinState;
|
||||
void (*callback)(void);
|
||||
unsigned long lastEventTime;
|
||||
int count;
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,29 @@
|
||||
1.0 by Simon Monk
|
||||
Library as downloaded 02Feb2012 22:55 UTC from http://srmonk.blogspot.com/2012/01/arduino-timer-library.html
|
||||
|
||||
1.1 by Jack Christensen
|
||||
Changed data types of variables and functions:
|
||||
o event types and indexes changed from int to int8_t.
|
||||
o periods and durations changed from lon to unsigned long.
|
||||
o update() and stop() functions typed as void, since they return nothing.
|
||||
o pin numbers and pin values changed from int to uint8_t, this agrees with digitalWrite().
|
||||
o added return values to Timer::pulse() and Timer::oscillate(uint8_t, unsigned long, uint8_t).
|
||||
o changed test in Event::update() to use subtraction to avoid rollover issues.
|
||||
o Updated keywords.txt file to include all functions.
|
||||
|
||||
1.2 by Damian Philipp
|
||||
o Added a range check to Timer::stop() to avoid memory corruption.
|
||||
o Added constants to <Timer.h>:
|
||||
- NO_TIMER_AVAILABLE: Signals that while an event was to be queued, no free timer could be found.
|
||||
- TIMER_NOT_AN_EVENT: Can be used to flag a variable that *might* contain a timer ID as
|
||||
*not* containing a timer ID
|
||||
o Replaced a bunch of magic numbers in <Timer.cpp> by the above constants
|
||||
o Added several comments
|
||||
o Added Timer::pulseImmediate(). pulseImmediate sets the pin to the specified value for the given
|
||||
duration. After the duration, the pin is set to !value.
|
||||
|
||||
1.3 by Jack Christensen
|
||||
o Added "blink2" example illustrating flashing two LEDs at different rates.
|
||||
o 19Oct2013: This is the last v1.x release. It will continue to be available on GitHub
|
||||
as a branch named v1.3. Future development will continue with Sandy Walsh's v2.0 which
|
||||
can pass context (timer ID, etc.) to the callback functions.
|
||||
@@ -0,0 +1,138 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
/* * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
||||
Code by Simon Monk
|
||||
http://www.simonmonk.org
|
||||
* * * * * * * * * * * * * * * * * * * * * * * * * * * * */
|
||||
|
||||
// For Arduino 1.0 and earlier
|
||||
#if defined(ARDUINO) && ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "Timer.h"
|
||||
|
||||
Timer::Timer(void)
|
||||
{
|
||||
}
|
||||
|
||||
int8_t Timer::every(unsigned long period, void (*callback)(), int repeatCount)
|
||||
{
|
||||
int8_t i = findFreeEventIndex();
|
||||
if (i == -1) return -1;
|
||||
|
||||
_events[i].eventType = EVENT_EVERY;
|
||||
_events[i].period = period;
|
||||
_events[i].repeatCount = repeatCount;
|
||||
_events[i].callback = callback;
|
||||
_events[i].lastEventTime = millis();
|
||||
_events[i].count = 0;
|
||||
return i;
|
||||
}
|
||||
|
||||
int8_t Timer::every(unsigned long period, void (*callback)())
|
||||
{
|
||||
return every(period, callback, -1); // - means forever
|
||||
}
|
||||
|
||||
int8_t Timer::after(unsigned long period, void (*callback)())
|
||||
{
|
||||
return every(period, callback, 1);
|
||||
}
|
||||
|
||||
int8_t Timer::oscillate(uint8_t pin, unsigned long period, uint8_t startingValue, int repeatCount)
|
||||
{
|
||||
int8_t i = findFreeEventIndex();
|
||||
if (i == NO_TIMER_AVAILABLE) return NO_TIMER_AVAILABLE;
|
||||
|
||||
_events[i].eventType = EVENT_OSCILLATE;
|
||||
_events[i].pin = pin;
|
||||
_events[i].period = period;
|
||||
_events[i].pinState = startingValue;
|
||||
digitalWrite(pin, startingValue);
|
||||
_events[i].repeatCount = repeatCount * 2; // full cycles not transitions
|
||||
_events[i].lastEventTime = millis();
|
||||
_events[i].count = 0;
|
||||
return i;
|
||||
}
|
||||
|
||||
int8_t Timer::oscillate(uint8_t pin, unsigned long period, uint8_t startingValue)
|
||||
{
|
||||
return oscillate(pin, period, startingValue, -1); // forever
|
||||
}
|
||||
|
||||
/**
|
||||
* This method will generate a pulse of !startingValue, occuring period after the
|
||||
* call of this method and lasting for period. The Pin will be left in !startingValue.
|
||||
*/
|
||||
int8_t Timer::pulse(uint8_t pin, unsigned long period, uint8_t startingValue)
|
||||
{
|
||||
return oscillate(pin, period, startingValue, 1); // once
|
||||
}
|
||||
|
||||
/**
|
||||
* This method will generate a pulse of startingValue, starting immediately and of
|
||||
* length period. The pin will be left in the !startingValue state
|
||||
*/
|
||||
int8_t Timer::pulseImmediate(uint8_t pin, unsigned long period, uint8_t pulseValue)
|
||||
{
|
||||
int8_t id(oscillate(pin, period, pulseValue, 1));
|
||||
// now fix the repeat count
|
||||
if (id >= 0 && id < MAX_NUMBER_OF_EVENTS) {
|
||||
_events[id].repeatCount = 1;
|
||||
}
|
||||
return id;
|
||||
}
|
||||
|
||||
|
||||
void Timer::stop(int8_t id)
|
||||
{
|
||||
if (id >= 0 && id < MAX_NUMBER_OF_EVENTS) {
|
||||
_events[id].eventType = EVENT_NONE;
|
||||
}
|
||||
}
|
||||
|
||||
void Timer::update(void)
|
||||
{
|
||||
unsigned long now = millis();
|
||||
update(now);
|
||||
}
|
||||
|
||||
void Timer::update(unsigned long now)
|
||||
{
|
||||
for (int8_t i = 0; i < MAX_NUMBER_OF_EVENTS; i++)
|
||||
{
|
||||
if (_events[i].eventType != EVENT_NONE)
|
||||
{
|
||||
_events[i].update(now);
|
||||
}
|
||||
}
|
||||
}
|
||||
int8_t Timer::findFreeEventIndex(void)
|
||||
{
|
||||
for (int8_t i = 0; i < MAX_NUMBER_OF_EVENTS; i++)
|
||||
{
|
||||
if (_events[i].eventType == EVENT_NONE)
|
||||
{
|
||||
return i;
|
||||
}
|
||||
}
|
||||
return NO_TIMER_AVAILABLE;
|
||||
}
|
||||
@@ -0,0 +1,67 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
/* * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
||||
Code by Simon Monk
|
||||
http://www.simonmonk.org
|
||||
* * * * * * * * * * * * * * * * * * * * * * * * * * * * */
|
||||
|
||||
#ifndef Timer_h
|
||||
#define Timer_h
|
||||
|
||||
#include <inttypes.h>
|
||||
#include "Event.h"
|
||||
|
||||
#define MAX_NUMBER_OF_EVENTS (10)
|
||||
|
||||
#define TIMER_NOT_AN_EVENT (-2)
|
||||
#define NO_TIMER_AVAILABLE (-1)
|
||||
|
||||
class Timer
|
||||
{
|
||||
|
||||
public:
|
||||
Timer(void);
|
||||
|
||||
int8_t every(unsigned long period, void (*callback)(void));
|
||||
int8_t every(unsigned long period, void (*callback)(void), int repeatCount);
|
||||
int8_t after(unsigned long duration, void (*callback)(void));
|
||||
int8_t oscillate(uint8_t pin, unsigned long period, uint8_t startingValue);
|
||||
int8_t oscillate(uint8_t pin, unsigned long period, uint8_t startingValue, int repeatCount);
|
||||
|
||||
/**
|
||||
* This method will generate a pulse of !startingValue, occuring period after the
|
||||
* call of this method and lasting for period. The Pin will be left in !startingValue.
|
||||
*/
|
||||
int8_t pulse(uint8_t pin, unsigned long period, uint8_t startingValue);
|
||||
|
||||
/**
|
||||
* This method will generate a pulse of pulseValue, starting immediately and of
|
||||
* length period. The pin will be left in the !pulseValue state
|
||||
*/
|
||||
int8_t pulseImmediate(uint8_t pin, unsigned long period, uint8_t pulseValue);
|
||||
void stop(int8_t id);
|
||||
void update(void);
|
||||
void update(unsigned long now);
|
||||
|
||||
protected:
|
||||
Event _events[MAX_NUMBER_OF_EVENTS];
|
||||
int8_t findFreeEventIndex(void);
|
||||
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,29 @@
|
||||
//Flash two LEDs at different rates using Simon Monk's Timer library
|
||||
//http://www.doctormonk.com/2012/01/arduino-timer-library.html
|
||||
//
|
||||
//Jack Christensen 30Sep2013
|
||||
//
|
||||
//Beerware license: Free for any and all purposes, but if you find it
|
||||
//useful AND we actually meet someday, you can buy me a beer!
|
||||
|
||||
#include "Timer.h" //http://github.com/JChristensen/Timer
|
||||
|
||||
const int LED1 = 8; //connect one LED to this pin (with appropriate current-limiting resistor of course)
|
||||
const int LED2 = 9; //connect another LED to this pin (don't forget the resistor)
|
||||
const unsigned long PERIOD1 = 1000; //one second
|
||||
const unsigned long PERIOD2 = 10000; //ten seconds
|
||||
Timer t; //instantiate the timer object
|
||||
|
||||
void setup(void)
|
||||
{
|
||||
pinMode(LED1, OUTPUT);
|
||||
pinMode(LED2, OUTPUT);
|
||||
t.oscillate(LED1, PERIOD1, HIGH);
|
||||
t.oscillate(LED2, PERIOD2, HIGH);
|
||||
}
|
||||
|
||||
void loop(void)
|
||||
{
|
||||
t.update();
|
||||
}
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
#include "Timer.h"
|
||||
|
||||
Timer t;
|
||||
|
||||
int ledEvent;
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(9600);
|
||||
int tickEvent = t.every(2000, doSomething);
|
||||
Serial.print("2 second tick started id=");
|
||||
Serial.println(tickEvent);
|
||||
|
||||
pinMode(13, OUTPUT);
|
||||
ledEvent = t.oscillate(13, 50, HIGH);
|
||||
Serial.print("LED event started id=");
|
||||
Serial.println(ledEvent);
|
||||
|
||||
int afterEvent = t.after(10000, doAfter);
|
||||
Serial.print("After event started id=");
|
||||
Serial.println(afterEvent);
|
||||
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
t.update();
|
||||
}
|
||||
|
||||
void doSomething()
|
||||
{
|
||||
Serial.print("2 second tick: millis()=");
|
||||
Serial.println(millis());
|
||||
}
|
||||
|
||||
|
||||
void doAfter()
|
||||
{
|
||||
Serial.println("stop the led event");
|
||||
t.stop(ledEvent);
|
||||
t.oscillate(13, 500, HIGH, 5);
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
#include "Timer.h"
|
||||
|
||||
Timer t;
|
||||
int pin = 13;
|
||||
|
||||
void setup()
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
t.pulse(pin, 10 * 1000, HIGH); // 10 seconds
|
||||
// t.pulse(pin, 10 * 60 * 1000, HIGH); // 10 minutes
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
t.update();
|
||||
}
|
||||
|
||||
@@ -0,0 +1,22 @@
|
||||
#include "Timer.h"
|
||||
|
||||
Timer t;
|
||||
int pin = 13;
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(9600);
|
||||
pinMode(pin, OUTPUT);
|
||||
t.oscillate(pin, 100, LOW);
|
||||
t.every(1000, takeReading);
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
t.update();
|
||||
}
|
||||
|
||||
void takeReading()
|
||||
{
|
||||
Serial.println(analogRead(0));
|
||||
}
|
||||
@@ -0,0 +1,31 @@
|
||||
#######################################
|
||||
# Syntax Coloring Map For Timer Library
|
||||
#######################################
|
||||
|
||||
#######################################
|
||||
# Datatypes (KEYWORD1)
|
||||
#######################################
|
||||
|
||||
Timer KEYWORD1
|
||||
Event KEYWORD1
|
||||
|
||||
#######################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
#######################################
|
||||
|
||||
every KEYWORD2
|
||||
after KEYWORD2
|
||||
oscillate KEYWORD2
|
||||
pulse KEYWORD2
|
||||
pulseImmediate KEYWORD2
|
||||
stop KEYWORD2
|
||||
update KEYWORD2
|
||||
findFreeEventIndex KEYWORD2
|
||||
|
||||
#######################################
|
||||
# Instances (KEYWORD2)
|
||||
#######################################
|
||||
|
||||
#######################################
|
||||
# Constants (LITERAL1)
|
||||
#######################################
|
||||
Reference in New Issue
Block a user