MySmartHome/MySensors
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Updated with input from Bruce Lacey

Browse Source
This commit is contained in:
Thomas Mørch
2015-04-15 21:34:02 +02:00
parent c0dee158df
commit 5e5f979122
1 changed files with 23 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files
libraries/MySensors/examples/MysensorMicro/MysensorMicro.ino
+23 -19
View File
@@ -1,9 +1,9 @@
// Default sensor sketch for MySensor Micro module
// Default sensor sketch for Sensebender Micro module
// Act as a temperature / humidity sensor by default.
//
// If A0 is held low while powering on, it will enter testmode, which verifies all on-board peripherals
//
// Battery voltage is repported as child sensorId 199, as well as battery percentage
// Battery voltage is repported as child sensorId 199, as well as battery percentage (Internal message)
#include <MySensor.h>
@@ -52,6 +52,7 @@ MyMessage msgBattery(CHILD_ID_BATT, V_VOLTAGE);
// Global settings
int measureCount = 0;
boolean isMetric = true;
// Storage of old measurements
float lastTemperature = -100;
@@ -70,7 +71,7 @@ void setup() {
pinMode(TEST_PIN,INPUT);
digitalWrite(TEST_PIN, HIGH); // Enable pullup
if (!digitalRead(TEST_PIN)) testMode();
digitalWrite(TEST_PIN,LOW);
digitalWrite(LED_PIN, HIGH);
@@ -84,13 +85,14 @@ void setup() {
humiditySensor.begin();
gw.sendSketchInfo("MysensorMicro", "1.0");
gw.sendSketchInfo("Sensebender Micro", "1.0");
gw.present(CHILD_ID_TEMP,S_TEMP);
gw.present(CHILD_ID_HUM,S_HUM);
gw.present(CHILD_ID_BATT, S_POWER);
switchClock(1<<CLKPS2); // Switch to 1Mhz for the reminder of the sketch, save power.
isMetric = gw.getConfig().isMetric;
Serial.print("isMetric: "); Serial.println(isMetric);
}
@@ -98,13 +100,17 @@ void setup() {
void loop() {
measureCount ++;
bool forceTransmit = false;
// When we wake up the 5th time after power on, switch to 1Mhz clock
// This allows us to print debug messages on startup (as serial port is dependend on oscilator settings).
if (measureCount == 5) switchClock(1<<CLKPS2); // Switch to 1Mhz for the reminder of the sketch, save power.
if (measureCount > FORCE_TRANSMIT_INTERVAL
) { // force a transmission
forceTransmit = true;
measureCount = 0;
}
gw.process();
sendBattLevel(forceTransmit);
sendTempHumidityMeasurements(forceTransmit);
@@ -127,16 +133,17 @@ void sendTempHumidityMeasurements(bool force)
si7021_env data = humiditySensor.getHumidityAndTemperature();
float temperature = data.celsiusHundredths/100;
float temperature = (isMetric ? data.celsiusHundredths : data.fahrenheitHundredths) / 100.0;
int humidity = data.humidityPercent;
if (lastTemperature != temperature) {
if ((lastTemperature != temperature) | (lastHumidity != humidity)) {
Serial.print("T: ");Serial.println(temperature);
Serial.print("H: ");Serial.println(humidity);
gw.send(msgTemp.set(temperature,1));
lastTemperature = temperature;
}
if (lastHumidity != humidity) {
gw.send(msgHum.set(humidity));
lastTemperature = temperature;
lastHumidity = humidity;
}
}
@@ -154,10 +161,10 @@ void sendBattLevel(bool force)
if (vcc != lastBattery) {
lastBattery = vcc;
// Calculate percentage
gw.send(msgBattery.set(vcc));
vcc = vcc - 1900; // subtract 1.9V from vcc, as this is the lowest voltage we will operate at
long percent = vcc / 14;
long percent = vcc / 14.0;
gw.sendBatteryLevel(percent);
}
}
@@ -278,7 +285,7 @@ void testMode()
while (1) // Blink OK pattern!
{
digitalWrite(LED_PIN, HIGH);
delay(800);
delay(200);
digitalWrite(LED_PIN, LOW);
delay(200);
}
@@ -288,10 +295,7 @@ void testMode()
Serial.println(F("----> Selftest failed!"));
while (1) // Blink FAILED pattern! Rappidly blinking..
{
digitalWrite(LED_PIN, HIGH);
delay(100);
digitalWrite(LED_PIN, LOW);
delay(100);
}
}
}